From: Jon Hunter <jon-hunter@ti.com>
To: linux-omap <linux-omap@vger.kernel.org>
Cc: Tony Lindgren <tony@atomide.com>, Paul Walmsley <paul@pwsan.com>,
Tarun Kanti <tarun.kanti@ti.com>, Jon Hunter <jon-hunter@ti.com>
Subject: [PATCH 5/5] ARM: OMAP: For all OMAP devices use clock framework to set dmtimer clock source
Date: Tue, 22 May 2012 15:17:56 -0500 [thread overview]
Message-ID: <1337717876-20713-1-git-send-email-jon-hunter@ti.com> (raw)
From: Jon Hunter <jon-hunter@ti.com>
OMAP1 and OMAP2+ devices had architecture specific functions for configuring
the dmtimer clock source. This was simply because the OMAP1 devices did not
support the clock framework for dynamically setting a clock's parent. Now OMAP1
can use the clock framework to set the parent clock, remove the architecture
specific functions and use a common function to set the parent clock for all
OMAP devices. This common function is based upon the OMAP2+
omap2_dm_timer_set_src() as this was using the clock framework.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
arch/arm/mach-omap1/timer.c | 15 +------
arch/arm/mach-omap2/timer.c | 61 -----------------------------
arch/arm/plat-omap/dmtimer.c | 43 +++++++++++++++++++-
arch/arm/plat-omap/include/plat/dmtimer.h | 1 -
4 files changed, 43 insertions(+), 77 deletions(-)
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
index 64c65bc..6ef4f6d 100644
--- a/arch/arm/mach-omap1/timer.c
+++ b/arch/arm/mach-omap1/timer.c
@@ -41,19 +41,6 @@
#define OMAP1_DM_TIMER_COUNT 8
-static int omap1_dm_timer_set_src(struct platform_device *pdev,
- int source)
-{
- int n = (pdev->id - 1) << 1;
- u32 l;
-
- l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
- l |= source << n;
- omap_writel(l, MOD_CONF_CTRL_1);
-
- return 0;
-}
-
static int __init omap1_dm_timer_init(void)
{
int i;
@@ -139,7 +126,7 @@ static int __init omap1_dm_timer_init(void)
goto err_free_pdata;
}
- pdata->set_timer_src = omap1_dm_timer_set_src;
+ pdata->timer_ip_version = OMAP_TIMER_IP_VERSION_1;
pdata->needs_manual_reset = 1;
ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index f1d8453..304a9c8 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -394,66 +394,6 @@ OMAP_SYS_TIMER(4)
#endif
/**
- * omap2_dm_timer_set_src - change the timer input clock source
- * @pdev: timer platform device pointer
- * @source: array index of parent clock source
- */
-static int omap2_dm_timer_set_src(struct platform_device *pdev, int source)
-{
- int ret;
- struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
- struct clk *fclk, *parent;
- char *parent_name = NULL;
-
- fclk = clk_get(&pdev->dev, "fck");
- if (IS_ERR_OR_NULL(fclk)) {
- dev_err(&pdev->dev, "%s: %d: clk_get() FAILED\n",
- __func__, __LINE__);
- return -EINVAL;
- }
-
- switch (source) {
- case OMAP_TIMER_SRC_SYS_CLK:
- parent_name = "timer_sys_ck";
- break;
-
- case OMAP_TIMER_SRC_32_KHZ:
- parent_name = "timer_32k_ck";
- break;
-
- case OMAP_TIMER_SRC_EXT_CLK:
- if (pdata->timer_ip_version == OMAP_TIMER_IP_VERSION_1) {
- parent_name = "timer_ext_ck";
- break;
- }
- dev_err(&pdev->dev, "%s: %d: invalid clk src.\n",
- __func__, __LINE__);
- clk_put(fclk);
- return -EINVAL;
- }
-
- parent = clk_get(&pdev->dev, parent_name);
- if (IS_ERR_OR_NULL(parent)) {
- dev_err(&pdev->dev, "%s: %d: clk_get() %s FAILED\n",
- __func__, __LINE__, parent_name);
- clk_put(fclk);
- return -EINVAL;
- }
-
- ret = clk_set_parent(fclk, parent);
- if (IS_ERR_VALUE(ret)) {
- dev_err(&pdev->dev, "%s: clk_set_parent() to %s FAILED\n",
- __func__, parent_name);
- ret = -EINVAL;
- }
-
- clk_put(parent);
- clk_put(fclk);
-
- return ret;
-}
-
-/**
* omap_timer_init - build and register timer device with an
* associated timer hwmod
* @oh: timer hwmod pointer to be used to build timer device
@@ -501,7 +441,6 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
*/
sscanf(oh->name, "timer%2d", &id);
- pdata->set_timer_src = omap2_dm_timer_set_src;
pdata->timer_ip_version = oh->class->rev;
/* Mark clocksource and clockevent timers as reserved */
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 3b0cfeb..a344998 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -378,6 +378,8 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
int ret;
+ char *parent_name = NULL;
+ struct clk *fclk, *parent;
struct dmtimer_platform_data *pdata;
if (unlikely(!timer))
@@ -388,7 +390,46 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
if (source < 0 || source >= 3)
return -EINVAL;
- ret = pdata->set_timer_src(timer->pdev, source);
+ fclk = clk_get(&timer->pdev->dev, "fck");
+ if (IS_ERR_OR_NULL(fclk)) {
+ pr_err("%s: fck not found\n", __func__);
+ return -EINVAL;
+ }
+
+ switch (source) {
+ case OMAP_TIMER_SRC_SYS_CLK:
+ parent_name = "timer_sys_ck";
+ break;
+
+ case OMAP_TIMER_SRC_32_KHZ:
+ parent_name = "timer_32k_ck";
+ break;
+
+ case OMAP_TIMER_SRC_EXT_CLK:
+ if (pdata->timer_ip_version == OMAP_TIMER_IP_VERSION_1) {
+ parent_name = "timer_ext_ck";
+ break;
+ }
+ pr_err("%s: invalid clock source\n", __func__);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ parent = clk_get(&timer->pdev->dev, parent_name);
+ if (IS_ERR_OR_NULL(parent)) {
+ pr_err("%s: %s not found\n", __func__, parent_name);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = clk_set_parent(fclk, parent);
+ if (IS_ERR_VALUE(ret))
+ pr_err("%s: failed to set %s as parent\n", __func__,
+ parent_name);
+
+ clk_put(parent);
+out:
+ clk_put(fclk);
return ret;
}
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 5da7356..4e82357 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -96,7 +96,6 @@ struct timer_regs {
};
struct dmtimer_platform_data {
- int (*set_timer_src)(struct platform_device *pdev, int source);
int timer_ip_version;
u32 needs_manual_reset:1;
bool reserved;
--
1.7.9.5
next reply other threads:[~2012-05-22 20:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-22 20:17 Jon Hunter [this message]
2012-05-23 0:13 ` [PATCH 5/5] ARM: OMAP: For all OMAP devices use clock framework to set dmtimer clock source Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1337717876-20713-1-git-send-email-jon-hunter@ti.com \
--to=jon-hunter@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
--cc=tarun.kanti@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).