From: Rajendra Nayak <rnayak@ti.com>
To: paul@pwsan.com, mturquette@ti.com
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Rajendra Nayak <rnayak@ti.com>
Subject: [PATCH 09/29] ARM: omap: clk: Nuke plat/clock.c & reuse struct clk as clk_hw_omap
Date: Thu, 14 Jun 2012 18:16:58 +0530 [thread overview]
Message-ID: <1339678038-23082-10-git-send-email-rnayak@ti.com> (raw)
In-Reply-To: <1339678038-23082-1-git-send-email-rnayak@ti.com>
plat/clock.c which has most of usecounting/locking infrastructure will
be used only for OMAP1 until that is moved to use COMMON clk.
reuse most of what plat/clock.h has while we move to common clk, and
move most of what 'struct clk' was as 'struct clk_hw_omap' which
will then be used to define platform specific parameters.
All usecounting/locking related variables from 'struct clk' are
dropped as they will not be used with 'struct clk_hw_omap'.
Based on the original changes from Mike Turquette.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
---
arch/arm/plat-omap/clock.c | 2 +
arch/arm/plat-omap/include/plat/clock.h | 69 +++++++++++++++++++++++++++++++
2 files changed, 71 insertions(+), 0 deletions(-)
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 62ec5c4..d311b7c 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -10,6 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#ifndef CONFIG_COMMON_CLK
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/list.h>
@@ -567,3 +568,4 @@ err_out:
late_initcall(clk_debugfs_init);
#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
+#endif /* CONFIG_COMMON_CLK */
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index d0ef57c..741275d 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -15,6 +15,14 @@
#include <linux/list.h>
+#ifdef CONFIG_COMMON_CLK
+#include <linux/clk-provider.h>
+
+struct clockdomain;
+#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
+
+#else
+
struct module;
struct clk;
struct clockdomain;
@@ -47,6 +55,7 @@ struct clkops {
void (*allow_idle)(struct clk *);
void (*deny_idle)(struct clk *);
};
+#endif /* CONFIG_COMMON_CLK */
#ifdef CONFIG_ARCH_OMAP2PLUS
@@ -192,6 +201,65 @@ struct dpll_data {
#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
#define CLOCK_CLKOUTX2 (1 << 5)
+#ifdef CONFIG_COMMON_CLK
+/**
+ * struct clk_hw_omap - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @flags: see "struct clk.flags possibilities" above
+ * @clksel_reg: for clksel clks, register va containing src/divisor select
+ * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
+ * @clksel: for clksel clks, pointer to struct clksel for this clock
+ * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
+ * @clkdm_name: clockdomain name that this clock is contained in
+ * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ */
+
+struct clk_hw_omap_ops;
+
+struct clk_hw_omap {
+ struct clk_hw hw;
+ struct list_head node;
+ unsigned long fixed_rate;
+ u8 fixed_div;
+ void __iomem *enable_reg;
+ u8 enable_bit;
+ u8 flags;
+#ifdef CONFIG_ARCH_OMAP2PLUS
+ void __iomem *clksel_reg;
+ u32 clksel_mask;
+ const struct clksel *clksel;
+ struct dpll_data *dpll_data;
+ const char *clkdm_name;
+ struct clockdomain *clkdm;
+#else
+ u8 rate_offset;
+ u8 src_offset;
+#endif
+ const struct clk_hw_omap_ops *ops;
+};
+
+struct clk_hw_omap_ops {
+ void (*find_idlest)(struct clk_hw_omap *oclk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit, u8 *idlest_val);
+ void (*find_companion)(struct clk_hw_omap *oclk,
+ void __iomem **other_reg,
+ u8 *other_bit);
+ void (*allow_idle)(struct clk_hw_omap *oclk);
+ void (*deny_idle)(struct clk_hw_omap *oclk);
+};
+
+unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw,
+ unsigned long parent_rate);
+#else
/**
* struct clk - OMAP struct clk
* @node: list_head connecting this clock into the full clock list
@@ -303,4 +371,5 @@ extern const struct clkops clkops_null;
extern struct clk dummy_ck;
+#endif /* CONFIG_COMMON_CLK */
#endif
--
1.7.1
next prev parent reply other threads:[~2012-06-14 12:47 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-14 12:46 [PATCH 00/29] Move OMAP2+ over to use COMMON clock Rajendra Nayak
2012-06-14 12:46 ` [PATCH 01/29] clk: Add support for rate table based dividers Rajendra Nayak
2012-06-18 20:04 ` Mike Turquette
2012-06-19 5:22 ` Rajendra Nayak
2012-06-14 12:46 ` [PATCH 02/29] clk: Add CLK_IS_BASIC flag to identify basic clocks Rajendra Nayak
2012-07-03 12:34 ` Rajendra Nayak
2012-07-04 6:18 ` Turquette, Mike
2012-07-04 6:39 ` Rajendra Nayak
2012-06-14 12:46 ` [PATCH 03/29] ARM: omap4: cm: add bitfield width values Rajendra Nayak
2012-06-14 12:46 ` [PATCH 04/29] ARM: omap: clk: use clk_prepare_enable and clk_disable_unprepare Rajendra Nayak
2012-06-14 19:11 ` Mike Turquette
2012-06-15 4:56 ` Rajendra Nayak
2012-06-20 11:41 ` Tony Lindgren
2012-06-21 5:36 ` Rajendra Nayak
2012-06-21 5:43 ` Paul Walmsley
2012-06-21 5:49 ` Rajendra Nayak
2012-06-14 12:46 ` [PATCH 05/29] mmc: omap_hsmmc: " Rajendra Nayak
2012-06-14 12:46 ` [PATCH 06/29] hwrng: omap: " Rajendra Nayak
2012-06-14 12:46 ` [PATCH 07/29] mfd: omap-usb: " Rajendra Nayak
2012-07-02 11:18 ` Samuel Ortiz
2012-07-02 11:16 ` Rajendra Nayak
2012-07-02 15:23 ` Samuel Ortiz
2012-06-14 12:46 ` [PATCH 08/29] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage Rajendra Nayak
2012-06-14 12:46 ` Rajendra Nayak [this message]
2012-06-19 1:38 ` [PATCH 09/29] ARM: omap: clk: Nuke plat/clock.c & reuse struct clk as clk_hw_omap Mike Turquette
2012-06-14 12:46 ` [PATCH 10/29] ARM: omap: clk: Remove all direct dereferncing of struct clk Rajendra Nayak
2012-06-14 12:47 ` [PATCH 11/29] ARM: omap: hwmod: Fix up hwmod based clkdm accesses Rajendra Nayak
2012-06-14 12:47 ` [PATCH 12/29] ARM: omap4: clk: Convert to common clk Rajendra Nayak
2012-06-14 12:47 ` [PATCH 13/29] ARM: omap3: " Rajendra Nayak
2012-06-14 12:47 ` [PATCH 14/29] ARM: omap2: " Rajendra Nayak
2012-06-14 12:47 ` [PATCH 15/29] ARM: omap: clk: list all clk_hw_omap clks to enable/disable autoidle Rajendra Nayak
2012-06-14 12:47 ` [PATCH 16/29] ARM: omap: clk: Define a function to enable clocks at init Rajendra Nayak
2012-06-14 12:47 ` [PATCH 17/29] ARM: omap: clock: Get rid of unwanted clkdm assocations within clks Rajendra Nayak
2012-06-14 12:47 ` [PATCH 18/29] ARM: omap4: clk: Add 44xx data using common struct clk Rajendra Nayak
2012-06-14 12:47 ` [PATCH 19/29] ARM: omap3: clk: Add 3xxx " Rajendra Nayak
2012-06-14 12:47 ` [PATCH 20/29] ARM: omap2: clk: Add 24xx " Rajendra Nayak
2012-06-14 12:47 ` [PATCH 21/29] ARM: omap: clk: Switch to COMMON clk Rajendra Nayak
2012-06-14 12:47 ` [PATCH 22/29] ARM: omap: clk: Use plat/clock.c only for OMAP1 Rajendra Nayak
2012-06-14 12:47 ` [PATCH 23/29] ARM: omap: hwmod: Cleanup !CONFIG_COMMON_CLK parts Rajendra Nayak
2012-06-14 12:47 ` [PATCH 24/29] ARM: omap4: clk: " Rajendra Nayak
2012-06-14 12:47 ` [PATCH 25/29] ARM: omap3: " Rajendra Nayak
2012-06-14 12:47 ` [PATCH 26/29] ARM: omap2: " Rajendra Nayak
2012-06-14 12:47 ` [PATCH 27/29] ARM: omap4: clk: Delete old OMAP clock data Rajendra Nayak
2012-06-14 12:47 ` [PATCH 28/29] ARM: omap3: " Rajendra Nayak
2012-06-14 12:47 ` [PATCH 29/29] ARM: omap2: " Rajendra Nayak
2012-06-18 4:27 ` [PATCH 00/29] Move OMAP2+ over to use COMMON clock Paul Walmsley
2012-06-18 11:03 ` Rajendra Nayak
2012-09-11 6:35 ` Paul Walmsley
2012-09-11 9:46 ` Vaibhav Hiremath
2012-09-11 23:10 ` Paul Walmsley
2012-09-12 3:53 ` Hiremath, Vaibhav
2012-09-11 20:09 ` Paul Walmsley
2012-09-15 5:32 ` Paul Walmsley
2012-09-15 5:49 ` Paul Walmsley
2012-09-16 20:36 ` Paul Walmsley
2012-09-17 21:26 ` Tony Lindgren
2012-09-17 22:12 ` Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1339678038-23082-10-git-send-email-rnayak@ti.com \
--to=rnayak@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mturquette@ti.com \
--cc=paul@pwsan.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).