linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rajendra Nayak <rnayak@ti.com>
To: paul@pwsan.com, mturquette@ti.com
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Rajendra Nayak <rnayak@ti.com>
Subject: [PATCH 02/29] clk: Add CLK_IS_BASIC flag to identify basic clocks
Date: Thu, 14 Jun 2012 18:16:51 +0530	[thread overview]
Message-ID: <1339678038-23082-3-git-send-email-rnayak@ti.com> (raw)
In-Reply-To: <1339678038-23082-1-git-send-email-rnayak@ti.com>

Most platforms end up using a mix of basic clock types and
some which use clk_hw_foo struct for filling in custom platform
information when the clocks don't fit into basic types supported.

In platform code, its useful to know if a clock is using a basic
type or clk_hw_foo, which helps platforms know if they can
safely use to_clk_hw_foo to derive the clk_hw_foo pointer from
clk_hw.

Mark all basic clocks with a CLK_IS_BASIC flag.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
---
 drivers/clk/clk-divider.c      |    2 +-
 drivers/clk/clk-fixed-factor.c |    2 +-
 drivers/clk/clk-fixed-rate.c   |    2 +-
 drivers/clk/clk-gate.c         |    2 +-
 drivers/clk/clk-mux.c          |    2 +-
 include/linux/clk-private.h    |    2 +-
 include/linux/clk-provider.h   |    1 +
 7 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index e4911ee..53f9dd7 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -266,7 +266,7 @@ struct clk *clk_register_divider(struct device *dev, const char *name,
 
 	init.name = name;
 	init.ops = &clk_divider_ops;
-	init.flags = flags;
+	init.flags = flags | CLK_IS_BASIC;
 	init.parent_names = (parent_name ? &parent_name: NULL);
 	init.num_parents = (parent_name ? 1 : 0);
 
diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
index c8c003e..a489985 100644
--- a/drivers/clk/clk-fixed-factor.c
+++ b/drivers/clk/clk-fixed-factor.c
@@ -82,7 +82,7 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
 
 	init.name = name;
 	init.ops = &clk_fixed_factor_ops;
-	init.flags = flags;
+	init.flags = flags | CLK_IS_BASIC;
 	init.parent_names = &parent_name;
 	init.num_parents = 1;
 
diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c
index cbd2462..7e14645 100644
--- a/drivers/clk/clk-fixed-rate.c
+++ b/drivers/clk/clk-fixed-rate.c
@@ -63,7 +63,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
 
 	init.name = name;
 	init.ops = &clk_fixed_rate_ops;
-	init.flags = flags;
+	init.flags = flags | CLK_IS_BASIC;
 	init.parent_names = (parent_name ? &parent_name: NULL);
 	init.num_parents = (parent_name ? 1 : 0);
 
diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index 578465e..15114fe 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -130,7 +130,7 @@ struct clk *clk_register_gate(struct device *dev, const char *name,
 
 	init.name = name;
 	init.ops = &clk_gate_ops;
-	init.flags = flags;
+	init.flags = flags | CLK_IS_BASIC;
 	init.parent_names = (parent_name ? &parent_name: NULL);
 	init.num_parents = (parent_name ? 1 : 0);
 
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index fd36a8e..508c032 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -106,7 +106,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
 
 	init.name = name;
 	init.ops = &clk_mux_ops;
-	init.flags = flags;
+	init.flags = flags | CLK_IS_BASIC;
 	init.parent_names = parent_names;
 	init.num_parents = num_parents;
 
diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h
index 2479239..0835bda 100644
--- a/include/linux/clk-private.h
+++ b/include/linux/clk-private.h
@@ -64,7 +64,7 @@ struct clk {
 		.parent_names = _parent_names,			\
 		.num_parents = ARRAY_SIZE(_parent_names),	\
 		.parents = _parents,				\
-		.flags = _flags,				\
+		.flags = _flags | CLK_IS_BASIC,			\
 	}
 
 #define DEFINE_CLK_FIXED_RATE(_name, _flags, _rate,		\
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index aa63aca..4b94f59 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -25,6 +25,7 @@
 #define CLK_SET_RATE_PARENT	BIT(2) /* propagate rate change up one level */
 #define CLK_IGNORE_UNUSED	BIT(3) /* do not gate even if unused */
 #define CLK_IS_ROOT		BIT(4) /* root clk, has no parent */
+#define CLK_IS_BASIC		BIT(5) /* Basic clk, can't do a to_clk_foo() */
 
 struct clk_hw;
 
-- 
1.7.1


  parent reply	other threads:[~2012-06-14 12:47 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-14 12:46 [PATCH 00/29] Move OMAP2+ over to use COMMON clock Rajendra Nayak
2012-06-14 12:46 ` [PATCH 01/29] clk: Add support for rate table based dividers Rajendra Nayak
2012-06-18 20:04   ` Mike Turquette
2012-06-19  5:22     ` Rajendra Nayak
2012-06-14 12:46 ` Rajendra Nayak [this message]
2012-07-03 12:34   ` [PATCH 02/29] clk: Add CLK_IS_BASIC flag to identify basic clocks Rajendra Nayak
2012-07-04  6:18     ` Turquette, Mike
2012-07-04  6:39       ` Rajendra Nayak
2012-06-14 12:46 ` [PATCH 03/29] ARM: omap4: cm: add bitfield width values Rajendra Nayak
2012-06-14 12:46 ` [PATCH 04/29] ARM: omap: clk: use clk_prepare_enable and clk_disable_unprepare Rajendra Nayak
2012-06-14 19:11   ` Mike Turquette
2012-06-15  4:56     ` Rajendra Nayak
2012-06-20 11:41       ` Tony Lindgren
2012-06-21  5:36         ` Rajendra Nayak
2012-06-21  5:43           ` Paul Walmsley
2012-06-21  5:49             ` Rajendra Nayak
2012-06-14 12:46 ` [PATCH 05/29] mmc: omap_hsmmc: " Rajendra Nayak
2012-06-14 12:46 ` [PATCH 06/29] hwrng: omap: " Rajendra Nayak
2012-06-14 12:46 ` [PATCH 07/29] mfd: omap-usb: " Rajendra Nayak
2012-07-02 11:18   ` Samuel Ortiz
2012-07-02 11:16     ` Rajendra Nayak
2012-07-02 15:23       ` Samuel Ortiz
2012-06-14 12:46 ` [PATCH 08/29] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage Rajendra Nayak
2012-06-14 12:46 ` [PATCH 09/29] ARM: omap: clk: Nuke plat/clock.c & reuse struct clk as clk_hw_omap Rajendra Nayak
2012-06-19  1:38   ` Mike Turquette
2012-06-14 12:46 ` [PATCH 10/29] ARM: omap: clk: Remove all direct dereferncing of struct clk Rajendra Nayak
2012-06-14 12:47 ` [PATCH 11/29] ARM: omap: hwmod: Fix up hwmod based clkdm accesses Rajendra Nayak
2012-06-14 12:47 ` [PATCH 12/29] ARM: omap4: clk: Convert to common clk Rajendra Nayak
2012-06-14 12:47 ` [PATCH 13/29] ARM: omap3: " Rajendra Nayak
2012-06-14 12:47 ` [PATCH 14/29] ARM: omap2: " Rajendra Nayak
2012-06-14 12:47 ` [PATCH 15/29] ARM: omap: clk: list all clk_hw_omap clks to enable/disable autoidle Rajendra Nayak
2012-06-14 12:47 ` [PATCH 16/29] ARM: omap: clk: Define a function to enable clocks at init Rajendra Nayak
2012-06-14 12:47 ` [PATCH 17/29] ARM: omap: clock: Get rid of unwanted clkdm assocations within clks Rajendra Nayak
2012-06-14 12:47 ` [PATCH 18/29] ARM: omap4: clk: Add 44xx data using common struct clk Rajendra Nayak
2012-06-14 12:47 ` [PATCH 19/29] ARM: omap3: clk: Add 3xxx " Rajendra Nayak
2012-06-14 12:47 ` [PATCH 20/29] ARM: omap2: clk: Add 24xx " Rajendra Nayak
2012-06-14 12:47 ` [PATCH 21/29] ARM: omap: clk: Switch to COMMON clk Rajendra Nayak
2012-06-14 12:47 ` [PATCH 22/29] ARM: omap: clk: Use plat/clock.c only for OMAP1 Rajendra Nayak
2012-06-14 12:47 ` [PATCH 23/29] ARM: omap: hwmod: Cleanup !CONFIG_COMMON_CLK parts Rajendra Nayak
2012-06-14 12:47 ` [PATCH 24/29] ARM: omap4: clk: " Rajendra Nayak
2012-06-14 12:47 ` [PATCH 25/29] ARM: omap3: " Rajendra Nayak
2012-06-14 12:47 ` [PATCH 26/29] ARM: omap2: " Rajendra Nayak
2012-06-14 12:47 ` [PATCH 27/29] ARM: omap4: clk: Delete old OMAP clock data Rajendra Nayak
2012-06-14 12:47 ` [PATCH 28/29] ARM: omap3: " Rajendra Nayak
2012-06-14 12:47 ` [PATCH 29/29] ARM: omap2: " Rajendra Nayak
2012-06-18  4:27 ` [PATCH 00/29] Move OMAP2+ over to use COMMON clock Paul Walmsley
2012-06-18 11:03   ` Rajendra Nayak
2012-09-11  6:35 ` Paul Walmsley
2012-09-11  9:46   ` Vaibhav Hiremath
2012-09-11 23:10     ` Paul Walmsley
2012-09-12  3:53       ` Hiremath, Vaibhav
2012-09-11 20:09   ` Paul Walmsley
2012-09-15  5:32   ` Paul Walmsley
2012-09-15  5:49     ` Paul Walmsley
2012-09-16 20:36   ` Paul Walmsley
2012-09-17 21:26     ` Tony Lindgren
2012-09-17 22:12       ` Paul Walmsley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1339678038-23082-3-git-send-email-rnayak@ti.com \
    --to=rnayak@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mturquette@ti.com \
    --cc=paul@pwsan.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).