From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kevin Hilman Subject: [PATCH 3/3] ARM: OMAP: omap_device: idle devices with no driver bound Date: Tue, 10 Jul 2012 16:02:04 -0700 Message-ID: <1341961324-19657-3-git-send-email-khilman@ti.com> References: <1341961324-19657-1-git-send-email-khilman@ti.com> Return-path: Received: from na3sys009aog138.obsmtp.com ([74.125.149.19]:60122 "EHLO na3sys009aog138.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754836Ab2GJXCL (ORCPT ); Tue, 10 Jul 2012 19:02:11 -0400 Received: by pbbrp16 with SMTP id rp16so865371pbb.10 for ; Tue, 10 Jul 2012 16:02:10 -0700 (PDT) In-Reply-To: <1341961324-19657-1-git-send-email-khilman@ti.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-omap@vger.kernel.org, Paul Walmsley Cc: linux-arm-kernel@lists.infradead.org Under some circumstances, drivers may leave an omap_device enabled due to driver programming errors, or due to a failure in the drivers probe method. Using the recently added omap_device driver_status field, we can detect conditions where an omap_device is enabled but has no driver bound and then ensure that the device is properly idled until it can be probed again. The goal of this feature is not only to detect and warn on these error conditions, but also to ensure that devices are properly put in low-power states so they do not prevent SoC-wide low-power states. Cc: Paul Walmsley Signed-off-by: Kevin Hilman --- arch/arm/plat-omap/omap_device.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 150112e..28ab6af 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -1133,3 +1133,33 @@ static int __init omap_device_init(void) return 0; } core_initcall(omap_device_init); + +static int __init omap_device_late_idle(struct device *dev, void *data) +{ + struct platform_device *pdev = to_platform_device(dev); + struct omap_device *od = to_omap_device(pdev); + + if (!od) + return 0; + + /* + * If omap_device state is enabled, but has no driver bound, + * idle it. + */ + if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) { + if (od->_state == OMAP_DEVICE_STATE_ENABLED) { + dev_warn(dev, "%s: enabled but no driver. Idling\n", + __func__); + omap_device_idle(pdev); + } + } + + return 0; +} + +static int __init omap_device_late_init(void) +{ + bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle); + return 0; +} +late_initcall(omap_device_late_init); -- 1.7.9.2