linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tero Kristo <t-kristo@ti.com>
To: Rajendra Nayak <rnayak@ti.com>
Cc: linux-omap@vger.kernel.org, khilman@ti.com, paul@pwsan.com,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCHv3 5/9] ARM: OMAP3: set autoidle flags for a few clocks
Date: Thu, 12 Jul 2012 18:32:27 +0300	[thread overview]
Message-ID: <1342107147.4672.37.camel@sokoban> (raw)
In-Reply-To: <4FFE9537.9080708@ti.com>

On Thu, 2012-07-12 at 14:43 +0530, Rajendra Nayak wrote:
> Hi Tero,
> 
> On Thursday 31 May 2012 06:58 PM, Tero Kristo wrote:
> > dpll3, dpll4 and sdrc_ick are controlled automatically by hardware.
> 
> sdrc_ick does not seem to have a software control to enable/disable
> this automatic control in hardware, so what you are doing in the
> patch below seems fine.
> However for dpll3 and dpll4, there is indeed a software control which
> is enabled/disabled through omap3_dpll_allow_idle/omap3_dpll_deny_idle
> functions respectively. So shouldn't the 'autoidle' flag for them be
> handled similar to what you do in omap2_clkt_iclk_allow_idle/
> omap2_clkt_iclk_deny_idle functions in your PATCH 2/9, instead of
> setting them to 'true' statically?

Yea, this is a good idea, and seems to work also. I'll add this change
to the next rev.

-Tero

> 
> regards,
> Rajendra
> 
> > Thus, reflect this with the autoidle flags, the clocks will no longer
> > show as active in usecount dumps and will allow the voltdm->sleep /
> > wakeup calls to work properly.
> >
> > Signed-off-by: Tero Kristo<t-kristo@ti.com>
> > Cc: Paul Walmsley<paul@pwsan.com>
> > Cc: Kevin Hilman<khilman@ti.com>
> > ---
> >   arch/arm/mach-omap2/clock3xxx_data.c |    3 +++
> >   1 files changed, 3 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
> > index 4e1a3b0..ca0de28 100644
> > --- a/arch/arm/mach-omap2/clock3xxx_data.c
> > +++ b/arch/arm/mach-omap2/clock3xxx_data.c
> > @@ -434,6 +434,7 @@ static struct clk dpll3_ck = {
> >   	.round_rate	=&omap2_dpll_round_rate,
> >   	.clkdm_name	= "dpll3_clkdm",
> >   	.recalc		=&omap3_dpll_recalc,
> > +	.autoidle	= true,
> >   };
> >
> >   /*
> > @@ -617,6 +618,7 @@ static struct clk dpll4_ck = {
> >   	.set_rate	=&omap3_dpll4_set_rate,
> >   	.clkdm_name	= "dpll4_clkdm",
> >   	.recalc		=&omap3_dpll_recalc,
> > +	.autoidle	= true,
> >   };
> >
> >   /*
> > @@ -1751,6 +1753,7 @@ static struct clk sdrc_ick = {
> >   	.flags		= ENABLE_ON_INIT,
> >   	.clkdm_name	= "core_l3_clkdm",
> >   	.recalc		=&followparent_recalc,
> > +	.autoidle	= true,
> >   };
> >
> >   static struct clk gpmc_fck = {
> 



  reply	other threads:[~2012-07-12 15:32 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-31 13:28 [PATCHv3 0/9] ARM: OMAP3+: pwrdm changes for usecounting Tero Kristo
2012-05-31 13:28 ` [PATCHv3 1/9] ARM: OMAP: clk: add support for omap_clk_for_each Tero Kristo
2012-05-31 13:28 ` [PATCHv3 2/9] ARM: OMAP3+: voltage/pwrdm/clkdm/clock add recursive usecount tracking Tero Kristo
2012-06-01 10:13   ` Menon, Nishanth
2012-06-01 10:27     ` Paul Walmsley
2012-06-04  9:38       ` Tero Kristo
2012-05-31 13:28 ` [PATCHv3 3/9] ARM: OMAP3+: voltage: add support for voltagedomain usecounts Tero Kristo
2012-05-31 13:28 ` [PATCHv3 4/9] ARM: OMAP3: add manual control for mpu / core pwrdm usecounting Tero Kristo
2012-05-31 13:28 ` [PATCHv3 5/9] ARM: OMAP3: set autoidle flags for a few clocks Tero Kristo
2012-07-12  9:13   ` Rajendra Nayak
2012-07-12 15:32     ` Tero Kristo [this message]
2012-05-31 13:28 ` [PATCHv3 6/9] ARM: OMAP: pm-debug: enhanced usecount debug support Tero Kristo
2012-05-31 13:29 ` [PATCHv3 7/9] ARM: OMAP: clockdomain: add support for preventing domain transitions Tero Kristo
2012-05-31 13:29 ` [PATCHv3 8/9] ARM: OMAP3: prevent per_clkdm from attempting manual " Tero Kristo
2012-05-31 23:40   ` Jon Hunter
2012-06-01  8:06     ` Tero Kristo
2012-07-12  9:41   ` Rajendra Nayak
2012-07-12 15:35     ` Tero Kristo
2012-05-31 13:29 ` [PATCHv3 9/9] TEMP: ARM: OMAP3: prevent dpll4 manual enable / disable + prevent core clkdm idle Tero Kristo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1342107147.4672.37.camel@sokoban \
    --to=t-kristo@ti.com \
    --cc=khilman@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=paul@pwsan.com \
    --cc=rnayak@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).