Re: [PATCHv7 08/12] ARM: OMAP4430: PM: Work-around for ROM code BUG of PER pwrst ctrl

[Tero Kristo <t-kristo@ti.com>]

On Thu, 2012-07-19 at 17:21 -0600, Paul Walmsley wrote:
> Hi
> 
> On Thu, 19 Jul 2012, Tero Kristo wrote:
> 
> > On OMAP4430 HS / EMU chips, ROM code appears to re-configure L4PER domain
> > next powerstate during wakeup from OSWR / OFF, programming it to ON.
> > This will prevent successive entries to cpuidle retention / off, until
> > kernel decices to change the L4PER target state, which can be delayed
> > for a very long time as kernel is lazy programming the target state.
> > 
> > This patch fixes the issue within the low power OSWR / OFF mode code, so
> > that this register is saved / restored across MPU OSWR / OFF state.
> > 
> > This problem seems to only occur with OMAP4430 HS/EMU, it does not impact
> > OMAP4460+ or GP devices.
> > 
> > Signed-off-by: Tero Kristo <t-kristo@ti.com>
> > ---
> >  arch/arm/mach-omap2/omap-mpuss-lowpower.c |   39 ++++++++++++++++++++++++++++-
> >  arch/arm/mach-omap2/pm.h                  |    1 +
> >  arch/arm/mach-omap2/pm44xx.c              |   10 +++++++
> >  3 files changed, 49 insertions(+), 1 deletions(-)
> > 
> > diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
> > index 0e5f81b..963a61b 100644
> > --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
> > +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
> 
> ...
> 
> > @@ -215,6 +225,28 @@ static void save_l2x0_context(void)
> >  {}
> >  #endif
> >  
> > +static inline void save_l4per_regs(void)
> > +{
> > +	int i;
> > +
> > +	if (!IS_PM44XX_ERRATUM(PM_OMAP4_ROM_L4PER_ERRATUM_PWSTCT))
> > +		return;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(l4per_reg); i++)
> > +		l4per_reg[i].val = __raw_readl(l4per_reg[i].addr);
> 
> This is accessing the system PRM registers directly.  We're trying to 
> remove these raw register accesses from non-PRM code because a PRM driver 
> is in the works.  Please move this to prm44xx.c or prminst44xx.c and 
> implement a higher-level interface that omap-mpuss-lowpower.c can call.

Ok, will figure out something for next rev.

-Tero