From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tomi Valkeinen Subject: Re: OMAP3 Overo: Crash on boot with Linus' master Date: Mon, 06 Aug 2012 13:38:24 +0300 Message-ID: <1344249504.12136.3.camel@deskari> References: <1343903452.2686.15.camel@deskari> Mime-Version: 1.0 Content-Type: multipart/signed; micalg="pgp-sha1"; protocol="application/pgp-signature"; boundary="=-armmcGv9ct5MUcBuU6Js" Return-path: Received: from na3sys009aog126.obsmtp.com ([74.125.149.155]:42963 "EHLO na3sys009aog126.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755826Ab2HFKie (ORCPT ); Mon, 6 Aug 2012 06:38:34 -0400 Received: by lago2 with SMTP id o2so3074895lag.1 for ; Mon, 06 Aug 2012 03:38:31 -0700 (PDT) In-Reply-To: <1343903452.2686.15.camel@deskari> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-omap , Tony Lindgren Cc: tarun.kanti@ti.com, Kevin Hilman , Arnd Bergmann --=-armmcGv9ct5MUcBuU6Js Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Hi, This problem exists on v3.6-rc1 also. I bisected the crash below to: f1d2c07d331f717da79a42952be7dc1c0d35f846=20 It's a merge commit, Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc I'm not sure why bisect did came up with a merge commit, instead of the actual code commit, though. I don't see any changes in overo's board file that could cause this, so could it be an omap3 wide problem? Although I would think somebody else had noticed it also, then. Tomi On Thu, 2012-08-02 at 13:30 +0300, Tomi Valkeinen wrote: > Hi, >=20 > I'm unable to boot with Linus' master branch from today on OMAP3 Overo > board. Below is the full boot log. Something related to GPIOs and IRQs, > perhaps. I've also attached my kernel conf. OMAP4 Blaze works ok, and > kernel v3.5 works ok. >=20 > The crash looks very similar to what is mentioned in a post from March > "GPIO abort on 3630/Zoom3". >=20 > Tomi >=20 >=20 > =04=01=EF=BF=BD=06t=EF=BF=BDb=01PH=EF=BF=BDUI=EF=BF=BD=EF=BF=BD=EF=BF=BD= =17=EF=BF=BD**S=EF=BF=BD=EF=BF=BD012.04.01-00958-g7d2d58b (Jun 26 2012 - 10= :37:53) > OMAP SD/MMC: 0 > reading u-boot.img > reading u-boot.img >=20 >=20 > U-Boot 2012.04.01-00958-g7d2d58b (Jun 26 2012 - 10:37:53) >=20 > OMAP3503-GP ES2.1, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz > Gumstix Overo board + LPDDR/NAND > I2C: ready > DRAM: 256 MiB > NAND: 256 MiB > MMC: OMAP SD/MMC: 0 > In: serial > Out: serial > Err: serial > Board revision: 0 > Direct connection on mmc2 > No EEPROM on expansion board > Die ID #496800020000000004013ef00a01100a > Net: No ethernet found. > Hit any key to stop autoboot: 3 =08=08=08 2 =08=08=08 1 =08=08=08 0=20 > reading uImage >=20 > 4107144 bytes read > ## Booting kernel from Legacy Image at 82000000 ... > Image Name: Linux-3.5.0-09139-g1a9b499 > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 4107080 Bytes =3D 3.9 MiB > Load Address: 80008000 > Entry Point: 80008000 > Verifying Checksum ... OK > Loading Kernel Image ... OK > OK >=20 > Starting kernel ... >=20 > Uncompressing Linux... done, booting the kernel. > [ 0.000000] Booting Linux on physical CPU 0 > [ 0.000000] Linux version 3.5.0-09139-g1a9b499 (tomba@deskari) (gcc ve= rsion 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #12 SMP Thu Aug 2 13:20:08 EES= T 2012 > [ 0.000000] CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=3D1= 0c53c7d > [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing = instruction cache > [ 0.000000] Machine: Gumstix Overo > [ 0.000000] Reserving 10485760 bytes SDRAM for VRAM > [ 0.000000] Memory policy: ECC disabled, Data cache writeback > [ 0.000000] On node 0 totalpages: 62720 > [ 0.000000] free_area_init_node: node 0, pgdat c07dc800, node_mem_map = c0d38000 > [ 0.000000] Normal zone: 512 pages used for memmap > [ 0.000000] Normal zone: 0 pages reserved > [ 0.000000] Normal zone: 62208 pages, LIFO batch:15 > [ 0.000000] OMAP3503 ES2.1 (l2cache neon isp ) > [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz > [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0f3e000 s12736 r8192 d15936= u36864 > [ 0.000000] pcpu-alloc: s12736 r8192 d15936 u36864 alloc=3D9*4096 > [ 0.000000] pcpu-alloc: [0] 0=20 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. To= tal pages: 62208 > [ 0.000000] Kernel command line: g_ether.host_addr=3D86:6a:a8:ad:e0:78= g_ether.dev_addr=3D02:51:c6:e2:c3:d3 console=3DttyO2,115200 root=3D/dev/nf= s nfsroot=3D/tftpboot/rootfs,tcp,nolock,rsize=3D1024,wsize=3D1024 ip=3D192.= 168.2.15:192.168.2.14::::usb0: vram=3D10M loglevel=3D9 no_console_suspend > [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) > [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 b= ytes) > [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 byt= es) > [ 0.000000] Memory: 245MB =3D 245MB total > [ 0.000000] Memory: 235032k/235032k available, 27112k reserved, 0K hig= hmem > [ 0.000000] Virtual kernel memory layout: > [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) > [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) > [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) > [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) > [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) > [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) > [ 0.000000] .text : 0xc0008000 - 0xc06f1304 (7077 kB) > [ 0.000000] .init : 0xc06f2000 - 0xc07401c0 ( 313 kB) > [ 0.000000] .data : 0xc0742000 - 0xc07df1c0 ( 629 kB) > [ 0.000000] .bss : 0xc07df1e4 - 0xc0d37c0c (5475 kB) > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] RCU restricting CPUs from NR_CPUS=3D2 to nr_cpu_ids=3D1. > [ 0.000000] NR_IRQS:474 > [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 in= terrupts > [ 0.000000] Total of 96 interrupts on 1 active controller > [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz > [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps e= very 131071999ms > [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz > [ 0.000000] Console: colour dummy device 80x30 > [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc= ., Ingo Molnar > [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 > [ 0.000000] ... MAX_LOCK_DEPTH: 48 > [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 > [ 0.000000] ... CLASSHASH_SIZE: 4096 > [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 > [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 > [ 0.000000] ... CHAINHASH_SIZE: 16384 > [ 0.000000] memory used by lock dependency info: 3695 kB > [ 0.000000] per task-struct memory footprint: 1152 bytes > [ 0.000976] Calibrating delay loop... 397.57 BogoMIPS (lpj=3D1554432) > [ 0.109344] pid_max: default: 32768 minimum: 301 > [ 0.109924] Security Framework initialized > [ 0.110107] Mount-cache hash table entries: 512 > [ 0.115509] CPU: Testing write buffer coherency: ok > [ 0.116516] CPU0: thread -1, cpu 0, socket -1, mpidr 0 > [ 0.116638] Setting up static identity map for 0x8050da20 - 0x8050da90 > [ 0.119415] Brought up 1 CPUs > [ 0.119445] SMP: Total of 1 processors activated (397.57 BogoMIPS). > [ 0.123138] devtmpfs: initialized > [ 0.145507] dummy:=20 > [ 0.147949] NET: Registered protocol family 16 > [ 0.149719] DMA: preallocated 256 KiB pool for atomic coherent allocat= ions > [ 0.150756] GPMC revision 5.0 > [ 0.151031] gpmc: irq-20 could not claim: err -22 > [ 0.161865] gpiochip_add: registered GPIOs 0 to 31 on device: gpio > [ 0.162445] OMAP GPIO hardware version 2.5 > [ 0.164367] gpiochip_add: registered GPIOs 32 to 63 on device: gpio > [ 0.166564] gpiochip_add: registered GPIOs 64 to 95 on device: gpio > [ 0.168365] gpiochip_add: registered GPIOs 96 to 127 on device: gpio > [ 0.170043] gpiochip_add: registered GPIOs 128 to 159 on device: gpio > [ 0.171722] gpiochip_add: registered GPIOs 160 to 191 on device: gpio > [ 0.181427] omap_mux_init: Add partition: #1: core, flags: 0 > [ 0.209991] Reprogramming SDRC clock to 332000000 Hz > [ 0.210113] Found NAND on CS0 > [ 0.210113] Registering NAND on CS0 > [ 0.213317] usbhs_omap: alias fck already exists > [ 0.229705] hw-breakpoint: debug architecture 0x4 unsupported. > [ 0.247924] omap-mcbsp.2: alias fck already exists > [ 0.248931] omap-mcbsp.3: alias fck already exists > [ 0.254699] OMAP DMA hardware revision 4.0 > [ 0.341369] bio: create slab at 0 > [ 0.449920] omap-dma-engine omap-dma-engine: OMAP DMA engine driver > [ 0.451080] fixed-dummy:=20 > [ 0.452423] vads7846: 3300 mV=20 > [ 0.459320] SCSI subsystem initialized > [ 0.462860] usbcore: registered new interface driver usbfs > [ 0.463531] usbcore: registered new interface driver hub > [ 0.464538] usbcore: registered new device driver usb > [ 0.472167] omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 2600 kHz > [ 0.482482] twl 1-0048: PIH (irq 7) chaining IRQs 320..328 > [ 0.483245] twl 1-0048: power (irq 325) chaining IRQs 328..335 > [ 0.486480] twl4030_gpio twl4030_gpio: gpio (irq 320) chaining IRQs 33= 6..353 > [ 0.488037] gpiochip_add: registered GPIOs 192 to 211 on device: twl40= 30 > [ 0.491241] VUSB1V5: 1500 mV normal standby > [ 0.494079] VUSB1V8: 1800 mV normal standby > [ 0.496337] VUSB3V1: 3100 mV normal standby > [ 0.501953] twl4030_usb twl4030_usb: HW_CONDITIONS 0xd0/208; link 3 > [ 0.506072] musb-omap2430 musb-omap2430: musb core is not yet ready > [ 0.506225] twl4030_usb twl4030_usb: Initialized TWL4030 USB module > [ 0.511413] vdd_mpu_iva: 600 <--> 1450 mV normal=20 > [ 0.513763] vdd_core: 600 <--> 1450 mV normal=20 > [ 0.516601] VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby > [ 0.519226] VDAC: 1800 mV normal standby > [ 0.521667] VDVI: 1800 mV normal standby > [ 0.522979] omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 400 kHz > [ 0.533843] Switching to clocksource 32k_counter > [ 0.705017] usbhs_omap usbhs_omap: xclk60mhsp2_ck set parentfailed err= or:-22 > [ 0.709075] NET: Registered protocol family 2 > [ 0.711517] TCP established hash table entries: 8192 (order: 4, 65536 = bytes) > [ 0.711975] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) > [ 0.716888] TCP: Hash tables configured (established 8192 bind 8192) > [ 0.717163] TCP: reno registered > [ 0.717193] UDP hash table entries: 256 (order: 2, 20480 bytes) > [ 0.717529] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) > [ 0.718536] NET: Registered protocol family 1 > [ 0.720092] RPC: Registered named UNIX socket transport module. > [ 0.720123] RPC: Registered udp transport module. > [ 0.720153] RPC: Registered tcp transport module. > [ 0.720153] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 0.721588] NetWinder Floating Point Emulator V0.97 (double precision) > [ 0.905181] VFS: Disk quotas dquot_6.5.2 > [ 0.905487] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 0.908721] NFS: Registering the id_resolver key type > [ 0.909332] Key type id_resolver registered > [ 0.909606] Key type id_legacy registered > [ 0.909851] jffs2: version 2.2. (NAND) (SUMMARY) =C2=A9 2001-2006 Red= Hat, Inc. > [ 0.910552] msgmni has been set to 459 > [ 0.914886] io scheduler noop registered > [ 0.914916] io scheduler deadline registered > [ 0.915008] io scheduler cfq registered (default) > [ 0.917419] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.926910] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq =3D 72) is a OM= AP UART0 > [ 0.929290] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq =3D 73) is a OM= AP UART1 > [ 0.930999] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq =3D 74) is a OM= AP UART2 > [ 1.731506] console [ttyO2] enabled > [ 1.778930] brd: module loaded > [ 1.807098] loop: module loaded > [ 1.819458] mtdoops: mtd device (mtddev=3Dname/number) must be supplie= d > [ 1.827484] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron = NAND 256MiB 1,8V 16-bit), page size: 2048, OOB size: 64 > [ 1.839538] Creating 5 MTD partitions on "omap2-nand.0": > [ 1.845153] 0x000000000000-0x000000080000 : "xloader" > [ 1.859710] 0x000000080000-0x000000240000 : "uboot" > [ 1.872589] 0x000000240000-0x000000280000 : "uboot environment" > [ 1.885009] 0x000000280000-0x000000680000 : "linux" > [ 1.899200] 0x000000680000-0x000010000000 : "rootfs" > [ 2.128631] OneNAND driver initializing > [ 2.138000] omap-dma-engine omap-dma-engine: allocating channel for 36 > [ 2.145294] omap-dma-engine omap-dma-engine: allocating channel for 35 > [ 2.153991] omap-dma-engine omap-dma-engine: allocating channel for 38 > [ 2.161132] omap-dma-engine omap-dma-engine: allocating channel for 37 > [ 2.178894] smsc911x: Driver version 2008-10-21 > [ 2.186065] smsc911x: Driver version 2008-10-21 > [ 2.193664] usbcore: registered new interface driver asix > [ 2.200286] usbcore: registered new interface driver cdc_ether > [ 2.207336] usbcore: registered new interface driver smsc95xx > [ 2.213989] usbcore: registered new interface driver net1080 > [ 2.220672] usbcore: registered new interface driver cdc_subset > [ 2.227661] usbcore: registered new interface driver zaurus > [ 2.234313] usbcore: registered new interface driver cdc_ncm > [ 2.242401] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 2.249450] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 > [ 2.256195] ehci-omap ehci-omap.0: failed to get ehci port1 regulator > [ 2.263214] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller > [ 2.272521] ehci-omap ehci-omap.0: new USB bus registered, assigned bu= s number 1 > [ 3.284393] ehci-omap ehci-omap.0: phy reset operation timed out > [ 3.290710] ehci-omap ehci-omap.0: reset hcs_params 0x1313 dbg=3D0 cc= =3D1 pcc=3D3 ordered ports=3D3 > [ 3.299560] ehci-omap ehci-omap.0: reset hcc_params 0016 thresh 1 ufra= mes 256/512/1024 park > [ 3.308807] ehci-omap ehci-omap.0: park 0 > [ 3.313171] ehci-omap ehci-omap.0: reset command 0080b02 park=3D3 ith= resh=3D8 period=3D1024 Reset HALT > [ 3.322601] ehci-omap ehci-omap.0: ...powerup ports... > [ 3.354888] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 > [ 3.360870] ehci-omap ehci-omap.0: init command 0010005 (park)=3D0 ith= resh=3D1 period=3D512 RUN > [ 3.378295] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 > [ 3.385467] usb usb1: default language 0x0409 > [ 3.390289] usb usb1: udev 1, busnum 1, minor =3D 0 > [ 3.395294] usb usb1: New USB device found, idVendor=3D1d6b, idProduct= =3D0002 > [ 3.402496] usb usb1: New USB device strings: Mfr=3D3, Product=3D2, Se= rialNumber=3D1 > [ 3.410125] usb usb1: Product: OMAP-EHCI Host Controller > [ 3.415710] usb usb1: Manufacturer: Linux 3.5.0-09139-g1a9b499 ehci_hc= d > [ 3.422729] usb usb1: SerialNumber: ehci-omap.0 > [ 3.430877] usb usb1: usb_probe_device > [ 3.434936] usb usb1: configuration #1 chosen from 1 choice > [ 3.441528] usb usb1: adding 1-0:1.0 (config #1, interface 0) > [ 3.449157] hub 1-0:1.0: usb_probe_interface > [ 3.453674] hub 1-0:1.0: usb_probe_interface - got id > [ 3.459167] hub 1-0:1.0: USB hub found > [ 3.463317] hub 1-0:1.0: 3 ports detected > [ 3.467620] hub 1-0:1.0: standalone hub > [ 3.471649] hub 1-0:1.0: individual port power switching > [ 3.477294] hub 1-0:1.0: individual port over-current protection > [ 3.483673] hub 1-0:1.0: power on to power good time: 20ms > [ 3.489929] hub 1-0:1.0: local power source is good > [ 3.495086] hub 1-0:1.0: enabling power on all ports > [ 3.503326] usbcore: registered new interface driver cdc_wdm > [ 3.509307] Initializing USB Mass Storage driver... > [ 3.515319] usbcore: registered new interface driver usb-storage > [ 3.521728] USB Mass Storage support registered. > [ 3.528076] usbcore: registered new interface driver libusual > [ 3.535034] usbcore: registered new interface driver usbtest > [ 3.540985] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) > [ 3.547729] musb-hdrc: ConfigData=3D0xde (UTMI-8, dyn FIFOs, bulk comb= ine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) > [ 3.559051] musb-hdrc: MHDRC RTL version 1.400=20 > [ 3.563812] musb-hdrc: setup fifo_mode 4 > [ 3.567993] musb-hdrc: 28/31 max ep, 16384/16384 memory > [ 3.576324] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 u= sing PIO, IRQ 92 > [ 3.587341] twl4030_usb twl4030_usb: twl4030_phy_suspend > [ 3.593597] udc musb-hdrc: registering UDC driver [g_ether] > [ 3.602050] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000 > [ 3.610626] usb0: MAC 02:51:c6:e2:c3:d3 > [ 3.614776] usb0: HOST MAC 86:6a:a8:ad:e0:78 > [ 3.619628] gadget: adding config #2 'RNDIS'/c07d208c > [ 3.625274] gadget: adding 'rndis'/ce823840 to config 'RNDIS'/c07d208= c > [ 3.632324] rndis_register: configNr =3D 0 > [ 3.636505] rndis_set_param_medium: 0 0 > [ 3.640533] gadget: RNDIS: dual speed IN/ep1in OUT/ep1out NOTIFY/ep2i= n > [ 3.647552] gadget: cfg 2/c07d208c speeds: high full > [ 3.652923] gadget: interface 0 =3D rndis/ce823840 > [ 3.658050] gadget: interface 1 =3D rndis/ce823840 > [ 3.663238] gadget: adding config #1 'CDC Ethernet (ECM)'/c07d1ff0 > [ 3.669891] gadget: adding 'cdc_ethernet'/ce823780 to config 'CDC Eth= ernet (ECM)'/c07d1ff0 > [ 3.678771] gadget: CDC Ethernet: dual speed IN/ep1in OUT/ep1out NOTI= FY/ep2in > [ 3.686401] gadget: cfg 1/c07d1ff0 speeds: high full > [ 3.691772] gadget: interface 0 =3D cdc_ethernet/ce823780 > [ 3.697540] gadget: interface 1 =3D cdc_ethernet/ce823780 > [ 3.703338] gadget: Ethernet Gadget, version: Memorial Day 2008 > [ 3.709777] gadget: g_ether ready > [ 3.718597] twl4030_usb twl4030_usb: twl4030_phy_resume > [ 3.724273] musb-hdrc musb-hdrc: MUSB HDRC host driver > [ 3.731903] musb-hdrc musb-hdrc: new USB bus registered, assigned bus = number 2 > [ 3.739715] musb-hdrc musb-hdrc: supports USB remote wakeup > [ 3.745941] usb usb2: default language 0x0409 > [ 3.750610] usb usb2: udev 1, busnum 2, minor =3D 128 > [ 3.755828] usb usb2: New USB device found, idVendor=3D1d6b, idProduct= =3D0002 > [ 3.763031] usb usb2: New USB device strings: Mfr=3D3, Product=3D2, Se= rialNumber=3D1 > [ 3.770690] usb usb2: Product: MUSB HDRC host driver > [ 3.775909] usb usb2: Manufacturer: Linux 3.5.0-09139-g1a9b499 musb-hc= d > [ 3.782897] usb usb2: SerialNumber: musb-hdrc > [ 3.790008] usb usb2: usb_probe_device > [ 3.794128] usb usb2: configuration #1 chosen from 1 choice > [ 3.800292] usb usb2: adding 2-0:1.0 (config #1, interface 0) > [ 3.807586] hub 2-0:1.0: usb_probe_interface > [ 3.812255] hub 2-0:1.0: usb_probe_interface - got id > [ 3.817718] hub 2-0:1.0: USB hub found > [ 3.821838] hub 2-0:1.0: 1 port detected > [ 3.826019] hub 2-0:1.0: standalone hub > [ 3.830078] hub 2-0:1.0: individual port power switching > [ 3.835723] hub 2-0:1.0: no over-current protection > [ 3.840911] hub 2-0:1.0: Single TT > [ 3.844512] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns) > [ 3.851226] hub 2-0:1.0: power on to power good time: 10ms > [ 3.857086] hub 2-0:1.0: 100mA bus power budget for each child > [ 3.863403] hub 2-0:1.0: local power source is good > [ 3.868560] hub 2-0:1.0: enabling power on all ports > [ 3.878540] mousedev: PS/2 mouse device common for all mice > [ 3.888916] Unhandled fault: external abort on non-linefetch (0x1028) = at 0xfb054040 > [ 3.897003] Internal error: : 1028 [#1] SMP ARM > [ 3.901763] Modules linked in: > [ 3.904998] CPU: 0 Not tainted (3.5.0-09139-g1a9b499 #12) > [ 3.911041] PC is at _set_gpio_triggering+0x2c/0x264 > [ 3.916259] LR is at gpio_irq_type+0xb8/0x160 > [ 3.920837] pc : [] lr : [] psr: 20000093 > [ 3.920837] sp : cf02ddf8 ip : cf09bec0 fp : ce81339c > [ 3.932891] r10: 00000072 r9 : c074df70 r8 : cf0a1e10 > [ 3.938385] r7 : 20000093 r6 : 00000001 r5 : 00000020 r4 : fb054000 > [ 3.945220] r3 : cf0a1e10 r2 : 00000002 r1 : 00000012 r0 : 00000040 > [ 3.952087] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segm= ent kernel > [ 3.959838] Control: 10c5387d Table: 80004019 DAC: 00000017 > [ 3.965881] Process swapper/0 (pid: 1, stack limit =3D 0xcf02c2f8) > [ 3.972198] Stack: (0xcf02ddf8 to 0xcf02e000) > [ 3.976776] dde0: = 00000002 c074df40 > [ 3.985351] de00: cf0a1e6c 20000093 c074dfe4 c074df40 c02dfe64 0000000= 0 c07be320 000000d2 > [ 3.993957] de20: 00000002 c00a4cbc c074dfe4 00000000 c074df40 cf3dc70= 0 000000d2 c074df90 > [ 4.002532] de40: 40000013 c00a50f0 000000d2 c0685104 cf1be060 cf1be06= 4 ce813000 c03f8034 > [ 4.011138] de60: c03f8058 000000d2 c074df40 ce813370 cf3dc700 c00a521= 0 ce82d800 00002002 > [ 4.019714] de80: ce818400 ce818400 00000000 c07a8644 ce813000 ce82d80= 0 00002002 c04fe660 > [ 4.028320] dea0: c0685104 ce813000 00000000 00000001 cf3dc780 cf3dc78= c c0d2f83c ce818400 > [ 4.036895] dec0: c0d2f83c c0d2f84c 00000000 c07d3274 c073beec c06f21c= 4 00000000 c038656c > [ 4.045501] dee0: c0386554 c03230d8 22222222 ce818400 c07d3274 ce81843= 4 00000000 00000000 > [ 4.054077] df00: c06f21c4 c032330c c07d3274 c0323278 00000000 c032188= 0 cf0a10a8 cf382490 > [ 4.062652] df20: c07d3274 c07cc9e0 ce8391c0 c03227a4 c0685104 c02c04f= 8 c07d3274 c07df200 > [ 4.071258] df40: cf02c000 00000000 00000000 c073beec c06f21c4 c032384= 0 00000000 c0723f3c > [ 4.079833] df60: c07df200 cf02c000 00000000 0000009f c06f21c4 c000872= 4 c06c8550 c06c8f40 > [ 4.088439] df80: c0f3b35e c071a3ac 00000001 00000000 c068110c 0000000= 0 00000006 00000006 > [ 4.097015] dfa0: 60000013 c0723f3c 00000006 c0723f1c c07df200 0000009= f c073beec c06f21c4 > [ 4.105621] dfc0: 00000000 c06f28fc 00000006 00000006 c06f21c4 0000000= 0 00000000 c06f2800 > [ 4.114196] dfe0: c0014ef4 00000013 00000000 00000000 00000000 c0014ef= 4 00fbcf11 01f7de18 > [ 4.122802] [] (_set_gpio_triggering+0x2c/0x264) from [] (irq_desc+0x9e24/0x16380) > [ 4.132598] Code: e1dc52b2 e3550000 0a00004c e3a06001 (e794c000)=20 > [ 4.139068] ---[ end trace bbbce2218b6cbd16 ]--- > [ 4.143951] In-band Error seen by MPU at address 0 > [ 4.149047] ------------[ cut here ]------------ > [ 4.153930] WARNING: at arch/arm/mach-omap2/omap_l3_smx.c:162 omap3_l3= _app_irq+0x104/0x12c() > [ 4.162780] Modules linked in: > [ 4.166046] [] (unwind_backtrace+0x0/0xf0) from []= (warn_slowpath_common+0x4c/0x64) > [ 4.175903] [] (warn_slowpath_common+0x4c/0x64) from [] (warn_slowpath_null+0x1c/0x24) > [ 4.186065] [] (warn_slowpath_null+0x1c/0x24) from [] (omap3_l3_app_irq+0x104/0x12c) > [ 4.196044] [] (omap3_l3_app_irq+0x104/0x12c) from [] (handle_irq_event_percpu+0x5c/0x240) > [ 4.206542] [] (handle_irq_event_percpu+0x5c/0x240) from [] (handle_irq_event+0x3c/0x5c) > [ 4.216888] [] (handle_irq_event+0x3c/0x5c) from [= ] (handle_level_irq+0xac/0x148) > [ 4.226562] [] (handle_level_irq+0xac/0x148) from [] (generic_handle_irq+0x30/0x48) > [ 4.236450] [] (generic_handle_irq+0x30/0x48) from [] (handle_IRQ+0x4c/0xac) > [ 4.245697] [] (handle_IRQ+0x4c/0xac) from [] (oma= p3_intc_handle_irq+0x60/0x74) > [ 4.255187] [] (omap3_intc_handle_irq+0x60/0x74) from [] (__irq_svc+0x44/0x5c) > [ 4.264587] Exception stack(0xcf02dc08 to 0xcf02dc50) > [ 4.269897] dc00: c07bdca0 00000000 00030003 0000000= 0 c0765a7c 0000000b > [ 4.278503] dc20: cf02fc00 00000014 00000017 00000001 00000000 0000000= 0 00000000 cf02dc50 > [ 4.287078] dc40: c0508368 c050836c 60000113 ffffffff > [ 4.292388] [] (__irq_svc+0x44/0x5c) from [] (_raw= _spin_unlock_irq+0x28/0x2c) > [ 4.301727] [] (_raw_spin_unlock_irq+0x28/0x2c) from [] (do_exit+0x5b4/0x80c) > [ 4.311035] [] (do_exit+0x5b4/0x80c) from [] (die+= 0x358/0x404) > [ 4.319000] [] (die+0x358/0x404) from [] (do_DataA= bort+0x8c/0x9c) > [ 4.327239] [] (do_DataAbort+0x8c/0x9c) from [] (_= _dabt_svc+0x44/0x80) > [ 4.335906] Exception stack(0xcf02ddb0 to 0xcf02ddf8) > [ 4.341217] dda0: 00000040 0000001= 2 00000002 cf0a1e10 > [ 4.349792] ddc0: fb054000 00000020 00000001 20000093 cf0a1e10 c074df7= 0 00000072 ce81339c > [ 4.358398] dde0: cf09bec0 cf02ddf8 c02dff1c c02df8fc 20000093 fffffff= f > [ 4.365356] [] (__dabt_svc+0x44/0x80) from [] (_se= t_gpio_triggering+0x2c/0x264) > [ 4.374847] [] (_set_gpio_triggering+0x2c/0x264) from [] (irq_desc+0x9e24/0x16380) > [ 4.384643] ---[ end trace bbbce2218b6cbd17 ]--- > [ 4.389801] Kernel panic - not syncing: Attempted to kill init! exitco= de=3D0x0000000b > [ 4.389801]=20 > [ 4.482757] gadget: high-speed config #1: CDC Ethernet (ECM) > [ 4.488800] gadget: init ecm > [ 4.491943] gadget: notify connect false > [ 4.496948] gadget: activate ecm > [ 4.500488] usb0: qlen 10 > [ 4.503234] gadget: ecm_close > [ 4.547912] gadget: notify connect false > [ 4.579895] gadget: notify speed 425984000 >=20 --=-armmcGv9ct5MUcBuU6Js Content-Type: application/pgp-signature; name="signature.asc" Content-Description: This is a digitally signed message part Content-Transfer-Encoding: 7bit -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJQH56gAAoJEPo9qoy8lh71AfYP/2bU7ZdAWy4KdPkAlI66zH4V GlgozHqzPJTJCjGF7AFWJg7TW8f6ttYLqpmq76Vg6Nb5lReBdK8acnV+krpBI8bN 6DAaia7ENTV4qMUeLuZvbU/PJdLsO0TdcrcajSl739ECz4G8ieFxYD1GAWlQLs4Z Y7X2mkAvTbB0dkyTcAiVbmTYStxfzFTzo4VrRN2sG7AmbIn6tTqPUEsGW08pWbPe Dqveh4PTA1A8vlHcUtJ/sqWSLnQ9le8HUDn4LJP2fMZYzJawvdwRNDi81lyhObfM QB61KuRuBPb0LQDGrNit063BMpF/Ge5xhGhOquToRKunMp0NhX92Ogh4yKk8MIxF KtIqVGxPz+lBEksULAyCEu6vRer+RJmYlsTfrY14oAiNDL6BZfGOj/s3OxxLag99 /T/bDTS2YLsZjIhLpkQ4or2EFGnX99NyYqil3GFQExaUQ+AsFDr+sDaWQsewY6gm sknii7lqLdQDpoZG8SdLJqlArhcny67CayzZt345r9kmPJ8Duj7auvGBlfFjqbVa 4BGEX5RNzevrzSFO6ScVEPAQ0AfxBnhJn5s7C9yI1ARmvPLiV2fNt7HMcVnZBEZ1 34U3e4YbHrG53Dtu6F6ZCybDImtLFG7baMEfy6NR8e+zTU9yhOpHSp5f7rgw99rX JokepvQhjkYPcw4u1Chw =sWt/ -----END PGP SIGNATURE----- --=-armmcGv9ct5MUcBuU6Js--