[PATCH V3 0/8] ARM: OMAP4: Add PMU Support

[Jon Hunter <jon-hunter@ti.com>]

This series adds PMU support for OMAP4 devices. This is based upon Will Deacons
series [1] and re-based upon the latest arm-soc next/cleanup branch (3.6-rc3)
that includes Will's series. It has been re-based upon this series because
of the dependency on Sudeep KarkadaNagesha's change (ARM: pmu: remove
arm_pmu_type enumeration) [2] that modifies the OMAP PMU code.

This series is also dependent upon some clock fixes for OMAP3 [3] and OMAP4 [4]
for PMU to operate correctly on OMAP3 and OMAP4.

This series also converts OMAP2/3 devices to use HWMOD to create the PMU device
and add a new file to mach-omap2 directory called pmu.c where the PMU devices
are created.

Testing:
- Verified that PMU is working on OMAP2420 H4, OMAP3430 Beagle Board, OMAP4430
  Panda and OMAP4460 Panda.
- Tested on the above boards with CPU-idle enabled to ensure that PMU is working
  with power management. For OMAP3430 verified that CORE retention state is
  entered again after stopping PMU events.

V3 changes:
- Will Deacon has taken the PMU runtime PM adaption patch in his series and so
  not included here [1].
- Dropped my fix for managing the EMU power domain on OMAP4 in favour of Paul's
  implementation [4]. Paul is planning to submit for v3.7.
- Added HWMOD data for OMAP3 DEBUG sub-system. The DEBUG sub-system was always
  being enabled on OMAP3 devices when using PMU and hence, hinding the fact
  that PMU is dependent upon the DEBUG sub-system on OMAP3 for it to work.

[1] git://git.kernel.org/pub/sicm/linux/kernel/git/will/linux.git perf/updates
[2] http://www.spinics.net/lists/arm-kernel/msg188726.html
[3] http://marc.info/?l=linux-omap&m=134333691309305&w=2
[4] http://marc.info/?l=linux-arm-kernel&m=134383567112518&w=2

Cc: Ming Lei <ming.lei@canonical.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@ti.com>

Jon Hunter (6):
  ARM: OMAP3: Add debugss HWMOD data
  ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD
  ARM: OMAP4: Re-map the CTIs IRQs from MPU to DEBUGSS
  ARM: OMAP2+: PMU: Add runtime PM support
  ARM: OMAP4: Enable PMU for OMAP4460/70
  ARM: OMAP2+: PMU: Add QoS constraint

Ming Lei (2):
  ARM: OMAP4430: Create PMU device via HWMOD
  ARM: OMAP4: Route PMU IRQs to CTI IRQs

 arch/arm/mach-omap2/Makefile                       |    1 +
 arch/arm/mach-omap2/devices.c                      |   32 ---
 arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c |    6 +
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c         |   32 +++
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c         |   11 +-
 arch/arm/mach-omap2/pmu.c                          |  233 ++++++++++++++++++++
 arch/arm/plat-omap/include/plat/irqs.h             |    1 +
 arch/arm/plat-omap/include/plat/omap44xx.h         |    3 +
 8 files changed, 285 insertions(+), 34 deletions(-)
 create mode 100644 arch/arm/mach-omap2/pmu.c

-- 
1.7.9.5