From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Pihet Subject: [PATCH 0/2] ARM: OMAP: SmartReflex: pass device dependent data via platform data Date: Mon, 24 Sep 2012 16:16:39 +0200 Message-ID: <1348496201-6378-1-git-send-email-j-pihet@ti.com> References: <1348152453-30532-1-git-send-email-j-pihet@ti.com> Return-path: Received: from mail-wi0-f178.google.com ([209.85.212.178]:60904 "EHLO mail-wi0-f178.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755650Ab2IXORA (ORCPT ); Mon, 24 Sep 2012 10:17:00 -0400 Received: by wibhr14 with SMTP id hr14so4930816wib.1 for ; Mon, 24 Sep 2012 07:16:59 -0700 (PDT) In-Reply-To: <1348152453-30532-1-git-send-email-j-pihet@ti.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, tony@atomide.com, Anton Vorontsov Cc: Kevin Hilman , J Keerthy , Jean Pihet Remove the device dependent settings (cpu_is_xxx(), IP fck etc.) from the driver code and pass them instead via the platform data. This allows a clean separation of the driver code and the platform code, as required by the move of the platform header files to include/linux/platform_data. The patch also includes a fix of the error handling path in omap_sr_probe to correctly de-allocate resources in case of problems. $SUBJECT requires this change. Jean Pihet (2): ARM: OMAP: SmartReflex: fix error path in init function ARM: OMAP: SmartReflex: pass device dependent data via platform data arch/arm/mach-omap2/sr_device.c | 13 ++++++++++ drivers/power/avs/smartreflex.c | 48 +++++++++++------------------------- include/linux/power/smartreflex.h | 14 +++++++++- 3 files changed, 40 insertions(+), 35 deletions(-) -- 1.7.7.6