From mboxrd@z Thu Jan 1 00:00:00 1970 From: Daniel Mack Subject: [PATCH 0/4] RFC: OMAP GPMC bindings Date: Mon, 22 Oct 2012 21:55:54 +0200 Message-ID: <1350935758-9215-1-git-send-email-zonque@gmail.com> Return-path: Received: from svenfoo.org ([82.94.215.22]:40358 "EHLO mail.zonque.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751554Ab2JVT42 (ORCPT ); Mon, 22 Oct 2012 15:56:28 -0400 Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org, jon-hunter@ti.com, x0148406@ti.com, tony@atomide.com, paul@pwsan.com, nsekhar@ti.com, Daniel Mack This is a series of patches to support GPMC peripherals on OMAP boards. Depends on Linus' master + omap-next (branch omap-for-v3.8/cleanup-headers-gpmc) The only supported peripheral for now is NAND, but other types would be easy to add. In order to make the gpmc driver the 'hub' for all sub-nodes, I had to add some includes. I'm not particularily happy about the fact that there are mutual references from gpmc.c to gpmc-nand.c now, but that was the easiest way. I successfully tested these patches on an AM33xx board to make NAND work. Comments welcome! Thanks, Daniel Daniel Mack (4): mtd: omap-nand: pass device_node in platform data ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs ARM: OMAP: gpmc: don't create devices from initcall on DT OMAP: mtd: gpmc: add DT bindings for GPMC timings and NAND Documentation/devicetree/bindings/bus/gpmc.txt | 59 +++++++++ .../devicetree/bindings/mtd/gpmc-nand.txt | 65 +++++++++ arch/arm/mach-omap2/gpmc-nand.c | 2 +- arch/arm/mach-omap2/gpmc.c | 146 +++++++++++++++++++++ drivers/mtd/nand/omap2.c | 4 +- include/linux/platform_data/mtd-nand-omap2.h | 2 + 6 files changed, 276 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/bus/gpmc.txt create mode 100644 Documentation/devicetree/bindings/mtd/gpmc-nand.txt -- 1.7.11.7