From: Shubhrajyoti D <shubhrajyoti-l0cyMroinI0@public.gmane.org>
To: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Shubhrajyoti D <shubhrajyoti-l0cyMroinI0@public.gmane.org>
Subject: [PATCH] spi: omap2-mcspi: Reorder the wait_for_completion for tx
Date: Tue, 6 Nov 2012 14:30:19 +0530 [thread overview]
Message-ID: <1352192419-22872-1-git-send-email-shubhrajyoti@ti.com> (raw)
The commit d7b4394e[Cleanup the omap2_mcspi_txrx_dma function]
changed the wait_for_completion order. Move the wait so that the
rx doesnot wait for the tx to complete.
Reported-and-tested-by: Sørensen, Stefan <Sorensen@polycom.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
drivers/spi/spi-omap2-mcspi.c | 39 +++++++++++++++++++--------------------
1 files changed, 19 insertions(+), 20 deletions(-)
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index bcfd062..251f6d0 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -323,18 +323,13 @@ static void omap2_mcspi_tx_dma(struct spi_device *spi,
struct omap2_mcspi *mcspi;
struct omap2_mcspi_dma *mcspi_dma;
unsigned int count;
- u8 * rx;
const u8 * tx;
- void __iomem *chstat_reg;
- struct omap2_mcspi_cs *cs = spi->controller_state;
mcspi = spi_master_get_devdata(spi->master);
mcspi_dma = &mcspi->dma_channels[spi->chip_select];
count = xfer->len;
- rx = xfer->rx_buf;
tx = xfer->tx_buf;
- chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0;
if (mcspi_dma->dma_tx) {
struct dma_async_tx_descriptor *tx;
@@ -359,19 +354,6 @@ static void omap2_mcspi_tx_dma(struct spi_device *spi,
dma_async_issue_pending(mcspi_dma->dma_tx);
omap2_mcspi_set_dma_req(spi, 0, 1);
- wait_for_completion(&mcspi_dma->dma_tx_completion);
- dma_unmap_single(mcspi->dev, xfer->tx_dma, count,
- DMA_TO_DEVICE);
-
- /* for TX_ONLY mode, be sure all words have shifted out */
- if (rx == NULL) {
- if (mcspi_wait_for_reg_bit(chstat_reg,
- OMAP2_MCSPI_CHSTAT_TXS) < 0)
- dev_err(&spi->dev, "TXS timed out\n");
- else if (mcspi_wait_for_reg_bit(chstat_reg,
- OMAP2_MCSPI_CHSTAT_EOT) < 0)
- dev_err(&spi->dev, "EOT timed out\n");
- }
}
static unsigned
@@ -492,6 +474,7 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
struct dma_slave_config cfg;
enum dma_slave_buswidth width;
unsigned es;
+ void __iomem *chstat_reg;
mcspi = spi_master_get_devdata(spi->master);
mcspi_dma = &mcspi->dma_channels[spi->chip_select];
@@ -526,8 +509,24 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
omap2_mcspi_tx_dma(spi, xfer, cfg);
if (rx != NULL)
- return omap2_mcspi_rx_dma(spi, xfer, cfg, es);
-
+ count = omap2_mcspi_rx_dma(spi, xfer, cfg, es);
+
+ if (tx != NULL) {
+ chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0;
+ wait_for_completion(&mcspi_dma->dma_tx_completion);
+ dma_unmap_single(mcspi->dev, xfer->tx_dma, xfer->len,
+ DMA_TO_DEVICE);
+
+ /* for TX_ONLY mode, be sure all words have shifted out */
+ if (rx == NULL) {
+ if (mcspi_wait_for_reg_bit(chstat_reg,
+ OMAP2_MCSPI_CHSTAT_TXS) < 0)
+ dev_err(&spi->dev, "TXS timed out\n");
+ else if (mcspi_wait_for_reg_bit(chstat_reg,
+ OMAP2_MCSPI_CHSTAT_EOT) < 0)
+ dev_err(&spi->dev, "EOT timed out\n");
+ }
+ }
return count;
}
--
1.7.5.4
------------------------------------------------------------------------------
LogMeIn Central: Instant, anywhere, Remote PC access and management.
Stay in control, update software, and manage PCs from one command center
Diagnose problems and improve visibility into emerging IT issues
Automate, monitor and manage. Do more in less time with Central
http://p.sf.net/sfu/logmein12331_d2d
_______________________________________________
spi-devel-general mailing list
spi-devel-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/spi-devel-general
next reply other threads:[~2012-11-06 9:00 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-06 9:00 Shubhrajyoti D [this message]
2012-11-06 9:03 ` [PATCH] spi: omap2-mcspi: Reorder the wait_for_completion for tx Mark Brown
[not found] ` <20121106090353.GI5044-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2012-11-06 9:17 ` Shubhrajyoti Datta
-- strict thread matches above, loose matches on Subject: below --
2012-11-06 9:17 Shubhrajyoti D
2012-11-06 9:22 ` Mark Brown
2012-11-06 10:09 ` Shubhrajyoti Datta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1352192419-22872-1-git-send-email-shubhrajyoti@ti.com \
--to=shubhrajyoti-l0cymroini0@public.gmane.org \
--cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox