[PATCH v2 00/22] OMAP USB Host cleanup

[PATCH v2 00/22] OMAP USB Host cleanup

[Roger Quadros]

Hi,

This patchset addresses the following

- Avoid addressing clocks one by one by name and use a for loop + bunch
  of cleanups.
- Get number of channels/ports dynamically either from revision register
  or from platform data. Avoids getting clocks that are not present.
- Add OMAP5 and HSIC mode (Not tested)

changes in v2:
- Clocks are allocated dynamically based on number of ports available
on the platform
- Reduced console spam if non critical clocks are not found on the platform.
- Get rid of cpu_is_.. macros from USB host driver.

cheers,
-roger

--

Roger Quadros (22):
  mfd: omap-usb-tll: Avoid creating copy of platform data
  mfd: omap-usb-tll: Fix channel count detection
  mfd: omap-usb-tll: Use devm_kzalloc/ioremap and clean up error path
  mfd: omap-usb-tll: Clean up clock handling
  mfd: omap-usb-tll: introduce and use mode_needs_tll()
  mfd: omap-usb-tll: Check for missing platform data in probe
  mfd: omap-usb-tll: Fix error message
  mfd: omap-usb-tll: serialize access to TLL device
  mfd: omap-usb-tll: Add OMAP5 revision and HSIC support
  mfd: omap_usb_host: Avoid creating copy of platform_data
  mfd: omap-usb-host: Use devm_kzalloc() and devm_request_and_ioremap()
  mfd: omap-usb-host: know about number of ports from revision register
  mfd: omap-usb-host: override number of ports from platform data
  mfd: omap-usb-host: cleanup clock management code
  ARM: OMAP2+: clock data: Merge utmi_px_gfclk into
    usb_host_hs_utmi_px_clk
  mfd: omap-usb-host: Manage HSIC clocks for HSIC mode
  mfd: omap-usb-host: Get rid of unnecessary spinlock
  mfd: omap-usb-host: get rid of cpu_is_omap..() macros
  mfd: omap-usb-host: clean up omap_usbhs_init()
  USB: ehci-omap: Don't free gpios that we didn't request
  ARM: OMAP2+: clock data: get rid of unused USB host clock aliases
  mfd: omap-usb-host: Don't spam console on clk_set_parent failure

 arch/arm/mach-omap2/clock3xxx_data.c  |   13 -
 arch/arm/mach-omap2/clock44xx_data.c  |   30 +--
 arch/arm/mach-omap2/usb-host.c        |    5 +
 arch/arm/plat-omap/include/plat/usb.h |    5 +
 drivers/mfd/omap-usb-host.c           |  467 +++++++++++++++++++--------------
 drivers/mfd/omap-usb-tll.c            |  244 ++++++++++--------
 drivers/usb/host/ehci-omap.c          |    8 -
 7 files changed, 421 insertions(+), 351 deletions(-)

-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 01/22] mfd: omap-usb-tll: Avoid creating copy of platform data

[Roger Quadros]

Just a pointer to the platform data should suffice.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
---
 drivers/mfd/omap-usb-tll.c |    9 ++++-----
 1 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index 4b7757b..d1750a4 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -98,7 +98,7 @@
 struct usbtll_omap {
 	struct clk				*usbtll_p1_fck;
 	struct clk				*usbtll_p2_fck;
-	struct usbtll_omap_platform_data	platdata;
+	struct usbtll_omap_platform_data	*pdata;
 	/* secure the register updates */
 	spinlock_t				lock;
 };
@@ -223,8 +223,7 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 
 	spin_lock_init(&tll->lock);
 
-	for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
-		tll->platdata.port_mode[i] = pdata->port_mode[i];
+	tll->pdata = pdata;
 
 	tll->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk");
 	if (IS_ERR(tll->usbtll_p1_fck)) {
@@ -362,7 +361,7 @@ static int __devexit usbtll_omap_remove(struct platform_device *pdev)
 static int usbtll_runtime_resume(struct device *dev)
 {
 	struct usbtll_omap			*tll = dev_get_drvdata(dev);
-	struct usbtll_omap_platform_data	*pdata = &tll->platdata;
+	struct usbtll_omap_platform_data	*pdata = tll->pdata;
 	unsigned long				flags;
 
 	dev_dbg(dev, "usbtll_runtime_resume\n");
@@ -388,7 +387,7 @@ static int usbtll_runtime_resume(struct device *dev)
 static int usbtll_runtime_suspend(struct device *dev)
 {
 	struct usbtll_omap			*tll = dev_get_drvdata(dev);
-	struct usbtll_omap_platform_data	*pdata = &tll->platdata;
+	struct usbtll_omap_platform_data	*pdata = tll->pdata;
 	unsigned long				flags;
 
 	dev_dbg(dev, "usbtll_runtime_suspend\n");
-- 
1.7.4.1

[PATCH v2 02/22] mfd: omap-usb-tll: Fix channel count detection

[Roger Quadros]

Fix channel count detecion for REV2. Also, don't give up
if we don't recognize the IP Revision. We assume the default
number of channels (i.e. 3) for unrecognized IPs.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 drivers/mfd/omap-usb-tll.c |   20 +++++++++++---------
 1 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index d1750a4..c083001 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -98,6 +98,7 @@
 struct usbtll_omap {
 	struct clk				*usbtll_p1_fck;
 	struct clk				*usbtll_p2_fck;
+	int					nch;	/* num. of channels */
 	struct usbtll_omap_platform_data	*pdata;
 	/* secure the register updates */
 	spinlock_t				lock;
@@ -210,7 +211,7 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 	unsigned				reg;
 	unsigned long				flags;
 	int					ret = 0;
-	int					i, ver, count;
+	int					i, ver;
 
 	dev_dbg(dev, "starting TI HSUSB TLL Controller\n");
 
@@ -262,16 +263,18 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 	ver =  usbtll_read(base, OMAP_USBTLL_REVISION);
 	switch (ver) {
 	case OMAP_USBTLL_REV1:
-	case OMAP_USBTLL_REV2:
-		count = OMAP_TLL_CHANNEL_COUNT;
+		tll->nch = OMAP_TLL_CHANNEL_COUNT;
 		break;
+	case OMAP_USBTLL_REV2:
 	case OMAP_USBTLL_REV3:
-		count = OMAP_REV2_TLL_CHANNEL_COUNT;
+		tll->nch = OMAP_REV2_TLL_CHANNEL_COUNT;
 		break;
 	default:
-		dev_err(dev, "TLL version failed\n");
-		ret = -ENODEV;
-		goto err_ioremap;
+		tll->nch = OMAP_TLL_CHANNEL_COUNT;
+		dev_dbg(dev,
+		 "USB TLL Rev : 0x%x not recognized, assuming %d channels\n",
+			ver, tll->nch);
+		break;
 	}
 
 	if (is_ehci_tll_mode(pdata->port_mode[0]) ||
@@ -291,7 +294,7 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 		usbtll_write(base, OMAP_TLL_SHARED_CONF, reg);
 
 		/* Enable channels now */
-		for (i = 0; i < count; i++) {
+		for (i = 0; i < tll->nch; i++) {
 			reg = usbtll_read(base,	OMAP_TLL_CHANNEL_CONF(i));
 
 			if (is_ohci_port(pdata->port_mode[i])) {
@@ -319,7 +322,6 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 		}
 	}
 
-err_ioremap:
 	spin_unlock_irqrestore(&tll->lock, flags);
 	iounmap(base);
 	pm_runtime_put_sync(dev);
-- 
1.7.4.1

[PATCH v2 03/22] mfd: omap-usb-tll: Use devm_kzalloc/ioremap and clean up error path

[Roger Quadros]

Use devm_ variants of kzalloc() and ioremap(). Simplify the error path.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 drivers/mfd/omap-usb-tll.c |   37 +++++++++++--------------------------
 1 files changed, 11 insertions(+), 26 deletions(-)

diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index c083001..ff5e16f 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -215,11 +215,10 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 
 	dev_dbg(dev, "starting TI HSUSB TLL Controller\n");
 
-	tll = kzalloc(sizeof(struct usbtll_omap), GFP_KERNEL);
+	tll = devm_kzalloc(dev, sizeof(struct usbtll_omap), GFP_KERNEL);
 	if (!tll) {
 		dev_err(dev, "Memory allocation failed\n");
-		ret = -ENOMEM;
-		goto end;
+		return -ENOMEM;
 	}
 
 	spin_lock_init(&tll->lock);
@@ -230,28 +229,21 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 	if (IS_ERR(tll->usbtll_p1_fck)) {
 		ret = PTR_ERR(tll->usbtll_p1_fck);
 		dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret);
-		goto err_tll;
+		return ret;
 	}
 
 	tll->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk");
 	if (IS_ERR(tll->usbtll_p2_fck)) {
 		ret = PTR_ERR(tll->usbtll_p2_fck);
 		dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret);
-		goto err_usbtll_p1_fck;
+		goto err_p2_fck;
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(dev, "usb tll get resource failed\n");
-		ret = -ENODEV;
-		goto err_usbtll_p2_fck;
-	}
-
-	base = ioremap(res->start, resource_size(res));
+	base = devm_request_and_ioremap(dev, res);
 	if (!base) {
-		dev_err(dev, "TLL ioremap failed\n");
-		ret = -ENOMEM;
-		goto err_usbtll_p2_fck;
+		ret = -EADDRNOTAVAIL;
+		goto err_res;
 	}
 
 	platform_set_drvdata(pdev, tll);
@@ -323,23 +315,17 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 	}
 
 	spin_unlock_irqrestore(&tll->lock, flags);
-	iounmap(base);
 	pm_runtime_put_sync(dev);
 	tll_pdev = pdev;
-	if (!ret)
-		goto end;
-	pm_runtime_disable(dev);
 
-err_usbtll_p2_fck:
+	return 0;
+
+err_res:
 	clk_put(tll->usbtll_p2_fck);
 
-err_usbtll_p1_fck:
+err_p2_fck:
 	clk_put(tll->usbtll_p1_fck);
 
-err_tll:
-	kfree(tll);
-
-end:
 	return ret;
 }
 
@@ -356,7 +342,6 @@ static int __devexit usbtll_omap_remove(struct platform_device *pdev)
 	clk_put(tll->usbtll_p2_fck);
 	clk_put(tll->usbtll_p1_fck);
 	pm_runtime_disable(&pdev->dev);
-	kfree(tll);
 	return 0;
 }
 
-- 
1.7.4.1

[PATCH v2 04/22] mfd: omap-usb-tll: Clean up clock handling

[Roger Quadros]

Every channel has a functional clock that is similarly named.
It makes sense to use a for loop to manage these clocks as OMAPs
can come with up to 3 channels.

Dynamically allocate and get channel clocks depending on the
number of clocks avaiable on the platform.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 drivers/mfd/omap-usb-tll.c |   93 +++++++++++++++++++++++++++-----------------
 1 files changed, 57 insertions(+), 36 deletions(-)

diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index ff5e16f..ab5c2e7 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -96,10 +96,9 @@
 #define is_ehci_tll_mode(x)	(x == OMAP_EHCI_PORT_MODE_TLL)
 
 struct usbtll_omap {
-	struct clk				*usbtll_p1_fck;
-	struct clk				*usbtll_p2_fck;
 	int					nch;	/* num. of channels */
 	struct usbtll_omap_platform_data	*pdata;
+	struct clk				**ch_clk;
 	/* secure the register updates */
 	spinlock_t				lock;
 };
@@ -225,26 +224,10 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 
 	tll->pdata = pdata;
 
-	tll->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk");
-	if (IS_ERR(tll->usbtll_p1_fck)) {
-		ret = PTR_ERR(tll->usbtll_p1_fck);
-		dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret);
-		return ret;
-	}
-
-	tll->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk");
-	if (IS_ERR(tll->usbtll_p2_fck)) {
-		ret = PTR_ERR(tll->usbtll_p2_fck);
-		dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret);
-		goto err_p2_fck;
-	}
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_request_and_ioremap(dev, res);
-	if (!base) {
-		ret = -EADDRNOTAVAIL;
-		goto err_res;
-	}
+	if (!base)
+		return -EADDRNOTAVAIL;
 
 	platform_set_drvdata(pdev, tll);
 	pm_runtime_enable(dev);
@@ -269,6 +252,32 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 		break;
 	}
 
+	spin_unlock_irqrestore(&tll->lock, flags);
+
+	tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk * [tll->nch]),
+						GFP_KERNEL);
+	if (!tll->ch_clk) {
+		ret = -ENOMEM;
+		dev_err(dev, "Couldn't allocate memory for channel clocks\n");
+		goto err_clk_alloc;
+	}
+
+	spin_lock_irqsave(&tll->lock, flags);
+
+	for (i = 0; i < tll->nch; i++) {
+		char clkname[] = "usb_tll_hs_usb_chx_clk";
+		struct clk *fck;
+
+		snprintf(clkname, sizeof(clkname),
+					"usb_tll_hs_usb_ch%d_clk", i);
+		fck = clk_get(dev, clkname);
+
+		if (IS_ERR(fck))
+			dev_dbg(dev, "can't get clock : %s\n", clkname);
+		else
+			tll->ch_clk[i] = fck;
+	}
+
 	if (is_ehci_tll_mode(pdata->port_mode[0]) ||
 	    is_ehci_tll_mode(pdata->port_mode[1]) ||
 	    is_ehci_tll_mode(pdata->port_mode[2]) ||
@@ -320,11 +329,9 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 
 	return 0;
 
-err_res:
-	clk_put(tll->usbtll_p2_fck);
-
-err_p2_fck:
-	clk_put(tll->usbtll_p1_fck);
+err_clk_alloc:
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
 
 	return ret;
 }
@@ -338,9 +345,11 @@ err_p2_fck:
 static int __devexit usbtll_omap_remove(struct platform_device *pdev)
 {
 	struct usbtll_omap *tll = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < tll->nch; i++)
+		clk_put(tll->ch_clk[i]);
 
-	clk_put(tll->usbtll_p2_fck);
-	clk_put(tll->usbtll_p1_fck);
 	pm_runtime_disable(&pdev->dev);
 	return 0;
 }
@@ -350,6 +359,7 @@ static int usbtll_runtime_resume(struct device *dev)
 	struct usbtll_omap			*tll = dev_get_drvdata(dev);
 	struct usbtll_omap_platform_data	*pdata = tll->pdata;
 	unsigned long				flags;
+	int i;
 
 	dev_dbg(dev, "usbtll_runtime_resume\n");
 
@@ -360,11 +370,20 @@ static int usbtll_runtime_resume(struct device *dev)
 
 	spin_lock_irqsave(&tll->lock, flags);
 
-	if (is_ehci_tll_mode(pdata->port_mode[0]))
-		clk_enable(tll->usbtll_p1_fck);
+	for (i = 0; i < tll->nch; i++) {
+		if (is_ehci_tll_mode(pdata->port_mode[i])) {
+			int r;
 
-	if (is_ehci_tll_mode(pdata->port_mode[1]))
-		clk_enable(tll->usbtll_p2_fck);
+			if (!tll->ch_clk[i])
+				continue;
+
+			r = clk_enable(tll->ch_clk[i]);
+			if (r) {
+				dev_err(dev,
+				 "Error enabling ch %d clock: %d\n", i, r);
+			}
+		}
+	}
 
 	spin_unlock_irqrestore(&tll->lock, flags);
 
@@ -376,6 +395,7 @@ static int usbtll_runtime_suspend(struct device *dev)
 	struct usbtll_omap			*tll = dev_get_drvdata(dev);
 	struct usbtll_omap_platform_data	*pdata = tll->pdata;
 	unsigned long				flags;
+	int i;
 
 	dev_dbg(dev, "usbtll_runtime_suspend\n");
 
@@ -386,11 +406,12 @@ static int usbtll_runtime_suspend(struct device *dev)
 
 	spin_lock_irqsave(&tll->lock, flags);
 
-	if (is_ehci_tll_mode(pdata->port_mode[0]))
-		clk_disable(tll->usbtll_p1_fck);
-
-	if (is_ehci_tll_mode(pdata->port_mode[1]))
-		clk_disable(tll->usbtll_p2_fck);
+	for (i = 0; i < tll->nch; i++) {
+		if (is_ehci_tll_mode(pdata->port_mode[i])) {
+			if (tll->ch_clk[i])
+				clk_disable(tll->ch_clk[i]);
+		}
+	}
 
 	spin_unlock_irqrestore(&tll->lock, flags);
 
-- 
1.7.4.1

[PATCH v2 07/22] mfd: omap-usb-tll: Fix error message

[Roger Quadros]

omap_enable/disable_tll() can fail if TLL device is not
initialized. It could be due to multiple reasons and not only
due to missing platform data.

Also make local variables static and use 'struct device *'
instead of 'struct platform_device *' for global reference.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 drivers/mfd/omap-usb-tll.c |   21 ++++++++++++---------
 1 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index a6a44de..f9c51cd 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -109,8 +109,8 @@ struct usbtll_omap {
 
 /*-------------------------------------------------------------------------*/
 
-const char usbtll_driver_name[] = USBTLL_DRIVER_NAME;
-struct platform_device	*tll_pdev;
+static const char usbtll_driver_name[] = USBTLL_DRIVER_NAME;
+static struct device	*tll_dev;
 
 /*-------------------------------------------------------------------------*/
 
@@ -334,7 +334,8 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 
 	spin_unlock_irqrestore(&tll->lock, flags);
 	pm_runtime_put_sync(dev);
-	tll_pdev = pdev;
+	/* only after this can omap_tll_enable/disable work */
+	tll_dev = dev;
 
 	return 0;
 
@@ -356,6 +357,8 @@ static int __devexit usbtll_omap_remove(struct platform_device *pdev)
 	struct usbtll_omap *tll = platform_get_drvdata(pdev);
 	int i;
 
+	tll_dev = NULL;
+
 	for (i = 0; i < tll->nch; i++)
 		clk_put(tll->ch_clk[i]);
 
@@ -435,21 +438,21 @@ static struct platform_driver usbtll_omap_driver = {
 
 int omap_tll_enable(void)
 {
-	if (!tll_pdev) {
-		pr_err("missing omap usbhs tll platform_data\n");
+	if (!tll_dev) {
+		pr_err("%s: OMAP USB TLL not initialized\n", __func__);
 		return  -ENODEV;
 	}
-	return pm_runtime_get_sync(&tll_pdev->dev);
+	return pm_runtime_get_sync(tll_dev);
 }
 EXPORT_SYMBOL_GPL(omap_tll_enable);
 
 int omap_tll_disable(void)
 {
-	if (!tll_pdev) {
-		pr_err("missing omap usbhs tll platform_data\n");
+	if (!tll_dev) {
+		pr_err("%s: OMAP USB TLL not initialized\n", __func__);
 		return  -ENODEV;
 	}
-	return pm_runtime_put_sync(&tll_pdev->dev);
+	return pm_runtime_put_sync(tll_dev);
 }
 EXPORT_SYMBOL_GPL(omap_tll_disable);
 
-- 
1.7.4.1

[PATCH v2 05/22] mfd: omap-usb-tll: introduce and use mode_needs_tll()

[Roger Quadros]

This is a handy macro to check if the port requires the
USB TLL module or not. Use it to Enable the TLL module and manage
the clocks.

Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
---
 drivers/mfd/omap-usb-tll.c |   20 ++++++++++++--------
 1 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index ab5c2e7..99a3087 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -95,6 +95,10 @@
 
 #define is_ehci_tll_mode(x)	(x == OMAP_EHCI_PORT_MODE_TLL)
 
+/* only PHY and UNUSED modes don't need TLL */
+#define omap_usb_mode_needs_tll(x)	((x != OMAP_USBHS_PORT_MODE_UNUSED) &&\
+					 (x != OMAP_EHCI_PORT_MODE_PHY))
+
 struct usbtll_omap {
 	int					nch;	/* num. of channels */
 	struct usbtll_omap_platform_data	*pdata;
@@ -211,6 +215,7 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 	unsigned long				flags;
 	int					ret = 0;
 	int					i, ver;
+	bool needs_tll;
 
 	dev_dbg(dev, "starting TI HSUSB TLL Controller\n");
 
@@ -278,12 +283,11 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 			tll->ch_clk[i] = fck;
 	}
 
-	if (is_ehci_tll_mode(pdata->port_mode[0]) ||
-	    is_ehci_tll_mode(pdata->port_mode[1]) ||
-	    is_ehci_tll_mode(pdata->port_mode[2]) ||
-	    is_ohci_port(pdata->port_mode[0]) ||
-	    is_ohci_port(pdata->port_mode[1]) ||
-	    is_ohci_port(pdata->port_mode[2])) {
+	needs_tll = false;
+	for (i = 0; i < tll->nch; i++)
+		needs_tll |= omap_usb_mode_needs_tll(pdata->port_mode[i]);
+
+	if (needs_tll) {
 
 		/* Program Common TLL register */
 		reg = usbtll_read(base, OMAP_TLL_SHARED_CONF);
@@ -371,7 +375,7 @@ static int usbtll_runtime_resume(struct device *dev)
 	spin_lock_irqsave(&tll->lock, flags);
 
 	for (i = 0; i < tll->nch; i++) {
-		if (is_ehci_tll_mode(pdata->port_mode[i])) {
+		if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
 			int r;
 
 			if (!tll->ch_clk[i])
@@ -407,7 +411,7 @@ static int usbtll_runtime_suspend(struct device *dev)
 	spin_lock_irqsave(&tll->lock, flags);
 
 	for (i = 0; i < tll->nch; i++) {
-		if (is_ehci_tll_mode(pdata->port_mode[i])) {
+		if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
 			if (tll->ch_clk[i])
 				clk_disable(tll->ch_clk[i]);
 		}
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 06/22] mfd: omap-usb-tll: Check for missing platform data in probe

[Roger Quadros]

No need to check for missing platform data in runtime_suspend/resume
as it makes more sense to do it in the probe function.

Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
---
 drivers/mfd/omap-usb-tll.c |   15 +++++----------
 1 files changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index 99a3087..a6a44de 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -225,6 +225,11 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	if (!pdata) {
+		dev_err(dev, "Platform data missing\n");
+		return -ENODEV;
+	}
+
 	spin_lock_init(&tll->lock);
 
 	tll->pdata = pdata;
@@ -367,11 +372,6 @@ static int usbtll_runtime_resume(struct device *dev)
 
 	dev_dbg(dev, "usbtll_runtime_resume\n");
 
-	if (!pdata) {
-		dev_dbg(dev, "missing platform_data\n");
-		return  -ENODEV;
-	}
-
 	spin_lock_irqsave(&tll->lock, flags);
 
 	for (i = 0; i < tll->nch; i++) {
@@ -403,11 +403,6 @@ static int usbtll_runtime_suspend(struct device *dev)
 
 	dev_dbg(dev, "usbtll_runtime_suspend\n");
 
-	if (!pdata) {
-		dev_dbg(dev, "missing platform_data\n");
-		return  -ENODEV;
-	}

[PATCH v2 08/22] mfd: omap-usb-tll: serialize access to TLL device

[Roger Quadros]

Get rid of the unnecessary spin_lock_irqsave/restore() as there is
no interrupt handler for this driver. Instead we serialize access
to tll_dev using a global spinlock.

Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
---
 drivers/mfd/omap-usb-tll.c |   53 ++++++++++++++++++++++---------------------
 1 files changed, 27 insertions(+), 26 deletions(-)

diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index f9c51cd..f901def 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -103,14 +103,13 @@ struct usbtll_omap {
 	int					nch;	/* num. of channels */
 	struct usbtll_omap_platform_data	*pdata;
 	struct clk				**ch_clk;
-	/* secure the register updates */
-	spinlock_t				lock;
 };
 
 /*-------------------------------------------------------------------------*/
 
 static const char usbtll_driver_name[] = USBTLL_DRIVER_NAME;
 static struct device	*tll_dev;
+static DEFINE_SPINLOCK(tll_lock);	/* serialize access to tll_dev */
 
 /*-------------------------------------------------------------------------*/
 
@@ -212,7 +211,6 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 	struct resource				*res;
 	struct usbtll_omap			*tll;
 	unsigned				reg;
-	unsigned long				flags;
 	int					ret = 0;
 	int					i, ver;
 	bool needs_tll;
@@ -230,8 +228,6 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	spin_lock_init(&tll->lock);
-
 	tll->pdata = pdata;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -243,8 +239,6 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 
-	spin_lock_irqsave(&tll->lock, flags);
-
 	ver =  usbtll_read(base, OMAP_USBTLL_REVISION);
 	switch (ver) {
 	case OMAP_USBTLL_REV1:
@@ -262,8 +256,6 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 		break;
 	}
 
-	spin_unlock_irqrestore(&tll->lock, flags);
-
 	tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk * [tll->nch]),
 						GFP_KERNEL);
 	if (!tll->ch_clk) {
@@ -272,8 +264,6 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 		goto err_clk_alloc;
 	}
 
-	spin_lock_irqsave(&tll->lock, flags);
-
 	for (i = 0; i < tll->nch; i++) {
 		char clkname[] = "usb_tll_hs_usb_chx_clk";
 		struct clk *fck;
@@ -332,10 +322,11 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 		}
 	}
 
-	spin_unlock_irqrestore(&tll->lock, flags);
 	pm_runtime_put_sync(dev);
 	/* only after this can omap_tll_enable/disable work */
+	spin_lock(&tll_lock);
 	tll_dev = dev;
+	spin_unlock(&tll_lock);
 
 	return 0;
 
@@ -357,7 +348,9 @@ static int __devexit usbtll_omap_remove(struct platform_device *pdev)
 	struct usbtll_omap *tll = platform_get_drvdata(pdev);
 	int i;
 
+	spin_lock(&tll_lock);
 	tll_dev = NULL;
+	spin_unlock(&tll_lock);
 
 	for (i = 0; i < tll->nch; i++)
 		clk_put(tll->ch_clk[i]);
@@ -370,13 +363,10 @@ static int usbtll_runtime_resume(struct device *dev)
 {
 	struct usbtll_omap			*tll = dev_get_drvdata(dev);
 	struct usbtll_omap_platform_data	*pdata = tll->pdata;
-	unsigned long				flags;
 	int i;
 
 	dev_dbg(dev, "usbtll_runtime_resume\n");
 
-	spin_lock_irqsave(&tll->lock, flags);
-
 	for (i = 0; i < tll->nch; i++) {
 		if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
 			int r;
@@ -392,8 +382,6 @@ static int usbtll_runtime_resume(struct device *dev)
 		}
 	}
 
-	spin_unlock_irqrestore(&tll->lock, flags);
-
 	return 0;
 }
 
@@ -401,13 +389,10 @@ static int usbtll_runtime_suspend(struct device *dev)
 {
 	struct usbtll_omap			*tll = dev_get_drvdata(dev);
 	struct usbtll_omap_platform_data	*pdata = tll->pdata;
-	unsigned long				flags;
 	int i;
 
 	dev_dbg(dev, "usbtll_runtime_suspend\n");
 
-	spin_lock_irqsave(&tll->lock, flags);
-
 	for (i = 0; i < tll->nch; i++) {
 		if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
 			if (tll->ch_clk[i])
@@ -415,8 +400,6 @@ static int usbtll_runtime_suspend(struct device *dev)
 		}
 	}
 
-	spin_unlock_irqrestore(&tll->lock, flags);
-
 	return 0;
 }
 
@@ -438,21 +421,39 @@ static struct platform_driver usbtll_omap_driver = {
 
 int omap_tll_enable(void)
 {
+	int ret;
+
+	spin_lock(&tll_lock);
+
 	if (!tll_dev) {
 		pr_err("%s: OMAP USB TLL not initialized\n", __func__);
-		return  -ENODEV;
+		ret = -ENODEV;
+	} else {
+		ret = pm_runtime_get_sync(tll_dev);
 	}
-	return pm_runtime_get_sync(tll_dev);
+
+	spin_unlock(&tll_lock);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(omap_tll_enable);
 
 int omap_tll_disable(void)
 {
+	int ret;
+
+	spin_lock(&tll_lock);
+
 	if (!tll_dev) {
 		pr_err("%s: OMAP USB TLL not initialized\n", __func__);
-		return  -ENODEV;
+		ret = -ENODEV;
+	} else {
+		ret = pm_runtime_put_sync(tll_dev);
 	}
-	return pm_runtime_put_sync(tll_dev);
+
+	spin_unlock(&tll_lock);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(omap_tll_disable);
 
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 09/22] mfd: omap-usb-tll: Add OMAP5 revision and HSIC support

[Roger Quadros]

The TLL module on OMAP5 has 3 channels.
HSIC mode requires the TLL channel to be in Transparent UTMI mode.

Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
---
 drivers/mfd/omap-usb-tll.c |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index f901def..8b6050f 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -54,10 +54,13 @@
 
 #define	OMAP_TLL_CHANNEL_CONF(num)			(0x040 + 0x004 * num)
 #define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT		24
+#define OMAP_TLL_CHANNEL_CONF_DRVVBUS			(1 << 16)
+#define OMAP_TLL_CHANNEL_CONF_CHRGVBUS			(1 << 15)
 #define	OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF		(1 << 11)
 #define	OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE		(1 << 10)
 #define	OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE		(1 << 9)
 #define	OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE		(1 << 8)
+#define OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI	(2 << 1)
 #define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS		(1 << 1)
 #define	OMAP_TLL_CHANNEL_CONF_CHANEN			(1 << 0)
 
@@ -92,6 +95,7 @@
 #define OMAP_USBTLL_REV1		0x00000015	/* OMAP3 */
 #define OMAP_USBTLL_REV2		0x00000018	/* OMAP 3630 */
 #define OMAP_USBTLL_REV3		0x00000004	/* OMAP4 */
+#define OMAP_USBTLL_REV4		0x00000006	/* OMAP5 */
 
 #define is_ehci_tll_mode(x)	(x == OMAP_EHCI_PORT_MODE_TLL)
 
@@ -242,6 +246,7 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 	ver =  usbtll_read(base, OMAP_USBTLL_REVISION);
 	switch (ver) {
 	case OMAP_USBTLL_REV1:
+	case OMAP_USBTLL_REV4:
 		tll->nch = OMAP_TLL_CHANNEL_COUNT;
 		break;
 	case OMAP_USBTLL_REV2:
@@ -310,6 +315,15 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
 				reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
 					| OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
 					| OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
+			} else if (pdata->port_mode[i] ==
+					OMAP_EHCI_PORT_MODE_HSIC) {
+				/*
+				 * HSIC Mode requires UTMI port configurations
+				 */
+				reg |= OMAP_TLL_CHANNEL_CONF_DRVVBUS
+				 | OMAP_TLL_CHANNEL_CONF_CHRGVBUS
+				 | OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI
+				 | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF;
 			} else {
 				continue;
 			}
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 10/22] mfd: omap_usb_host: Avoid creating copy of platform_data

[Roger Quadros]

We can just hold the pointer to the platform data instead
of creating a copy of it.

Also get rid of the unnecessary missing platform data checks
in runtime_suspend/resume. We are already checking for missing
platform data in probe.

Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
Acked-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
---
 drivers/mfd/omap-usb-host.c |   30 ++++++++----------------------
 1 files changed, 8 insertions(+), 22 deletions(-)

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 23cec57..ffd2013 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -100,7 +100,7 @@ struct usbhs_hcd_omap {
 
 	void __iomem			*uhh_base;
 
-	struct usbhs_omap_platform_data	platdata;
+	struct usbhs_omap_platform_data	*pdata;
 
 	u32				usbhs_rev;
 	spinlock_t			lock;
@@ -192,8 +192,8 @@ static int omap_usbhs_alloc_children(struct platform_device *pdev)
 	int					ret;
 
 	omap = platform_get_drvdata(pdev);
-	ehci_data = omap->platdata.ehci_data;
-	ohci_data = omap->platdata.ohci_data;
+	ehci_data = omap->pdata->ehci_data;
+	ohci_data = omap->pdata->ohci_data;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci");
 	if (!res) {
@@ -276,16 +276,11 @@ static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
 static int usbhs_runtime_resume(struct device *dev)
 {
 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
-	struct usbhs_omap_platform_data	*pdata = &omap->platdata;
 	unsigned long			flags;
+	struct usbhs_omap_platform_data *pdata = omap->pdata;
 
 	dev_dbg(dev, "usbhs_runtime_resume\n");
 
-	if (!pdata) {
-		dev_dbg(dev, "missing platform_data\n");
-		return  -ENODEV;
-	}
-
 	omap_tll_enable();
 	spin_lock_irqsave(&omap->lock, flags);
 
@@ -308,16 +303,11 @@ static int usbhs_runtime_resume(struct device *dev)
 static int usbhs_runtime_suspend(struct device *dev)
 {
 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
-	struct usbhs_omap_platform_data	*pdata = &omap->platdata;
 	unsigned long			flags;
+	struct usbhs_omap_platform_data *pdata = omap->pdata;
 
 	dev_dbg(dev, "usbhs_runtime_suspend\n");
 
-	if (!pdata) {
-		dev_dbg(dev, "missing platform_data\n");
-		return  -ENODEV;
-	}
-
 	spin_lock_irqsave(&omap->lock, flags);
 
 	if (is_ehci_tll_mode(pdata->port_mode[0]))
@@ -340,7 +330,7 @@ static int usbhs_runtime_suspend(struct device *dev)
 static void omap_usbhs_init(struct device *dev)
 {
 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
-	struct usbhs_omap_platform_data	*pdata = &omap->platdata;
+	struct usbhs_omap_platform_data	*pdata = omap->pdata;
 	unsigned long			flags;
 	unsigned			reg;
 
@@ -447,7 +437,7 @@ static void omap_usbhs_init(struct device *dev)
 static void omap_usbhs_deinit(struct device *dev)
 {
 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
-	struct usbhs_omap_platform_data	*pdata = &omap->platdata;
+	struct usbhs_omap_platform_data	*pdata = omap->pdata;
 
 	if (pdata->ehci_data->phy_reset) {
 		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
@@ -488,11 +478,7 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 
 	spin_lock_init(&omap->lock);
 
-	for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
-		omap->platdata.port_mode[i] = pdata->port_mode[i];

[PATCH v2 11/22] mfd: omap-usb-host: Use devm_kzalloc() and devm_request_and_ioremap()

[Roger Quadros]

Use devm_ variants of kzalloc and ioremap. Also clean up error path.

Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
---
 drivers/mfd/omap-usb-host.c |   36 +++++++++---------------------------
 1 files changed, 9 insertions(+), 27 deletions(-)

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index ffd2013..afa0ff6 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -465,17 +465,20 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 
 	if (!pdata) {
 		dev_err(dev, "Missing platform data\n");
-		ret = -ENOMEM;
-		goto end_probe;
+		return -ENODEV;
 	}
 
-	omap = kzalloc(sizeof(*omap), GFP_KERNEL);
+	omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
 	if (!omap) {
 		dev_err(dev, "Memory allocation failed\n");
-		ret = -ENOMEM;
-		goto end_probe;
+		return -ENOMEM;
 	}
 
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
+	omap->uhh_base = devm_request_and_ioremap(dev, res);
+	if (!omap->uhh_base)
+		return -EADDRNOTAVAIL;
+
 	spin_lock_init(&omap->lock);
 
 	omap->pdata = pdata;
@@ -573,20 +576,6 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 				"failed error:%d\n", ret);
 	}
 
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
-	if (!res) {
-		dev_err(dev, "UHH EHCI get resource failed\n");
-		ret = -ENODEV;
-		goto err_init_60m_fclk;
-	}
-
-	omap->uhh_base = ioremap(res->start, resource_size(res));
-	if (!omap->uhh_base) {
-		dev_err(dev, "UHH ioremap failed\n");
-		ret = -ENOMEM;
-		goto err_init_60m_fclk;
-	}
-
 	platform_set_drvdata(pdev, omap);
 
 	omap_usbhs_init(dev);
@@ -596,13 +585,10 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 		goto err_alloc;
 	}
 
-	goto end_probe;
+	return 0;
 
 err_alloc:
 	omap_usbhs_deinit(&pdev->dev);
-	iounmap(omap->uhh_base);
-
-err_init_60m_fclk:
 	clk_put(omap->init_60m_fclk);
 
 err_usbhost_p2_fck:
@@ -626,9 +612,7 @@ err_utmi_p1_fck:
 err_end:
 	clk_put(omap->ehci_logic_fck);
 	pm_runtime_disable(dev);
-	kfree(omap);
 
-end_probe:
 	return ret;
 }
 
@@ -643,7 +627,6 @@ static int __devexit usbhs_omap_remove(struct platform_device *pdev)
 	struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
 
 	omap_usbhs_deinit(&pdev->dev);
-	iounmap(omap->uhh_base);
 	clk_put(omap->init_60m_fclk);
 	clk_put(omap->usbhost_p2_fck);
 	clk_put(omap->usbhost_p1_fck);
@@ -653,7 +636,6 @@ static int __devexit usbhs_omap_remove(struct platform_device *pdev)
 	clk_put(omap->utmi_p1_fck);
 	clk_put(omap->ehci_logic_fck);
 	pm_runtime_disable(&pdev->dev);
-	kfree(omap);
 
 	return 0;
 }
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 15/22] ARM: OMAP2+: clock data: Merge utmi_px_gfclk into usb_host_hs_utmi_px_clk

[Roger Quadros]

There is no such clock as utmi_p1_gfclk. It is only a clock selector
bit to select th the parent of usb_host_hs_utmi_p1_clk.
So we get rid of utmi_p1_gfclk and utmi_p2_gfclk by merging them into
usb_host_hs_utmi_p1_clk and usb_host_hs_utmi_p2_clk respectively.

CC: Benoit Cousson <b-cousson-l0cyMroinI0@public.gmane.org>
Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
---
 arch/arm/mach-omap2/clock3xxx_data.c |    2 --
 arch/arm/mach-omap2/clock44xx_data.c |   30 ++++++++----------------------
 2 files changed, 8 insertions(+), 24 deletions(-)

diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 1f42c9d..0d2ee04 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3400,8 +3400,6 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"usbhost_ick",	&usbhost_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK("usbhs_omap",	"usbhost_ick",	&usbhost_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK(NULL,	"utmi_p1_gfclk",	&dummy_ck,	CK_3XXX),
-	CLK(NULL,	"utmi_p2_gfclk",	&dummy_ck,	CK_3XXX),
 	CLK(NULL,	"xclk60mhsp1_ck",	&dummy_ck,	CK_3XXX),
 	CLK(NULL,	"xclk60mhsp2_ck",	&dummy_ck,	CK_3XXX),
 	CLK(NULL,	"usb_host_hs_utmi_p1_clk",	&dummy_ck,	CK_3XXX),
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 6efc30c..fc3e490 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -2462,25 +2462,19 @@ static const struct clksel utmi_p1_gfclk_sel[] = {
 	{ .parent = NULL },
 };
 
-static struct clk utmi_p1_gfclk = {
-	.name		= "utmi_p1_gfclk",
+/* Merged utmi_p1_gfclk into usb_host_hs_utmi_p1_clk */
+static struct clk usb_host_hs_utmi_p1_clk = {
+	.name		= "usb_host_hs_utmi_p1_clk",
 	.parent		= &init_60m_fclk,
 	.clksel		= utmi_p1_gfclk_sel,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
 	.clksel_mask	= OMAP4430_CLKSEL_UTMI_P1_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk usb_host_hs_utmi_p1_clk = {
-	.name		= "usb_host_hs_utmi_p1_clk",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
 	.enable_bit	= OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT,
 	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &utmi_p1_gfclk,
-	.recalc		= &followparent_recalc,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 static const struct clksel utmi_p2_gfclk_sel[] = {
@@ -2489,25 +2483,19 @@ static const struct clksel utmi_p2_gfclk_sel[] = {
 	{ .parent = NULL },
 };
 
-static struct clk utmi_p2_gfclk = {
-	.name		= "utmi_p2_gfclk",
+/* Merged utmi_p2_gfclk into usb_host_hs_utmi_p2_clk */
+static struct clk usb_host_hs_utmi_p2_clk = {
+	.name		= "usb_host_hs_utmi_p2_clk",
 	.parent		= &init_60m_fclk,
 	.clksel		= utmi_p2_gfclk_sel,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
 	.clksel_mask	= OMAP4430_CLKSEL_UTMI_P2_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk usb_host_hs_utmi_p2_clk = {
-	.name		= "usb_host_hs_utmi_p2_clk",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
 	.enable_bit	= OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT,
 	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &utmi_p2_gfclk,
-	.recalc		= &followparent_recalc,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk usb_host_hs_utmi_p3_clk = {
@@ -3246,9 +3234,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"uart4_fck",			&uart4_fck,	CK_443X),
 	CLK("usbhs_omap",	"fs_fck",		&usb_host_fs_fck,	CK_443X),
 	CLK(NULL,	"usb_host_fs_fck",		&usb_host_fs_fck,	CK_443X),
-	CLK(NULL,	"utmi_p1_gfclk",		&utmi_p1_gfclk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_utmi_p1_clk",	&usb_host_hs_utmi_p1_clk,	CK_443X),
-	CLK(NULL,	"utmi_p2_gfclk",		&utmi_p2_gfclk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_utmi_p2_clk",	&usb_host_hs_utmi_p2_clk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_utmi_p3_clk",	&usb_host_hs_utmi_p3_clk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_hsic480m_p1_clk",	&usb_host_hs_hsic480m_p1_clk,	CK_443X),
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 18/22] mfd: omap-usb-host: get rid of cpu_is_omap..() macros

[Roger Quadros]

Instead of using cpu_is_omap..() macros in the device driver we
rely on information provided in the platform data.

The only information we need is whether the USB Host module has
a single ULPI bypass control bit for all ports or individual bypass
control bits for each port. OMAP3 REV2.1 and earlier have the former.

Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
CC: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 arch/arm/mach-omap2/usb-host.c        |    4 ++++
 arch/arm/plat-omap/include/plat/usb.h |    3 +++
 drivers/mfd/omap-usb-host.c           |    3 +--
 3 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index eb85528..455b135 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -509,6 +509,10 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 	if (cpu_is_omap34xx()) {
 		setup_ehci_io_mux(pdata->port_mode);
 		setup_ohci_io_mux(pdata->port_mode);
+
+		if (omap_rev() <= OMAP3430_REV_ES2_1)
+			usbhs_data.single_ulpi_bypass = true;
+
 	} else if (cpu_is_omap44xx()) {
 		setup_4430ehci_io_mux(pdata->port_mode);
 		setup_4430ohci_io_mux(pdata->port_mode);
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 6b618a1..3f2336a 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -65,6 +65,9 @@ struct usbhs_omap_platform_data {
 
 	struct ehci_hcd_omap_platform_data	*ehci_data;
 	struct ohci_hcd_omap_platform_data	*ohci_data;
+
+	/* OMAP3 <= ES2.1 have a single ulpi bypass control bit */
+	unsigned				single_ulpi_bypass:1;
 };
 
 struct usbtll_omap_platform_data {
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 62e1f21..aaf272d 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -24,7 +24,6 @@
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
 #include <linux/gpio.h>
-#include <plat/cpu.h>
 #include <plat/usb.h>
 #include <linux/pm_runtime.h>
 
@@ -400,7 +399,7 @@ static void omap_usbhs_init(struct device *dev)
 			reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
 
 		/* Bypass the TLL module for PHY mode operation */
-		if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
+		if (pdata->single_ulpi_bypass) {
 			dev_dbg(dev, "OMAP3 ES version <= ES2.1\n");
 			if (is_ehci_phy_mode(pdata->port_mode[0]) ||
 				is_ehci_phy_mode(pdata->port_mode[1]) ||
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 18/22] mfd: omap-usb-host: get rid of cpu_is_omap..() macros

[Tony Lindgren]

* Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org> [121128 06:51]:
> Instead of using cpu_is_omap..() macros in the device driver we
> rely on information provided in the platform data.
> 
> The only information we need is whether the USB Host module has
> a single ULPI bypass control bit for all ports or individual bypass
> control bits for each port. OMAP3 REV2.1 and earlier have the former.

Does this depend on the other patches in this series? If not,
this should be applied first as this is blocking omap multiplatform
development. And this too needs to be updated for the new location
of usb-omap.h in linux next.

Other than that:

Acked-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>

> Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> CC: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> ---
>  arch/arm/mach-omap2/usb-host.c        |    4 ++++
>  arch/arm/plat-omap/include/plat/usb.h |    3 +++
>  drivers/mfd/omap-usb-host.c           |    3 +--
>  3 files changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
> index eb85528..455b135 100644
> --- a/arch/arm/mach-omap2/usb-host.c
> +++ b/arch/arm/mach-omap2/usb-host.c
> @@ -509,6 +509,10 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
>  	if (cpu_is_omap34xx()) {
>  		setup_ehci_io_mux(pdata->port_mode);
>  		setup_ohci_io_mux(pdata->port_mode);
> +
> +		if (omap_rev() <= OMAP3430_REV_ES2_1)
> +			usbhs_data.single_ulpi_bypass = true;
> +
>  	} else if (cpu_is_omap44xx()) {
>  		setup_4430ehci_io_mux(pdata->port_mode);
>  		setup_4430ohci_io_mux(pdata->port_mode);
> diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
> index 6b618a1..3f2336a 100644
> --- a/arch/arm/plat-omap/include/plat/usb.h
> +++ b/arch/arm/plat-omap/include/plat/usb.h
> @@ -65,6 +65,9 @@ struct usbhs_omap_platform_data {
>  
>  	struct ehci_hcd_omap_platform_data	*ehci_data;
>  	struct ohci_hcd_omap_platform_data	*ohci_data;
> +
> +	/* OMAP3 <= ES2.1 have a single ulpi bypass control bit */
> +	unsigned				single_ulpi_bypass:1;
>  };
>  
>  struct usbtll_omap_platform_data {
> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
> index 62e1f21..aaf272d 100644
> --- a/drivers/mfd/omap-usb-host.c
> +++ b/drivers/mfd/omap-usb-host.c
> @@ -24,7 +24,6 @@
>  #include <linux/clk.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/gpio.h>
> -#include <plat/cpu.h>
>  #include <plat/usb.h>
>  #include <linux/pm_runtime.h>
>  
> @@ -400,7 +399,7 @@ static void omap_usbhs_init(struct device *dev)
>  			reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
>  
>  		/* Bypass the TLL module for PHY mode operation */
> -		if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
> +		if (pdata->single_ulpi_bypass) {
>  			dev_dbg(dev, "OMAP3 ES version <= ES2.1\n");
>  			if (is_ehci_phy_mode(pdata->port_mode[0]) ||
>  				is_ehci_phy_mode(pdata->port_mode[1]) ||
> -- 
> 1.7.4.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 18/22] mfd: omap-usb-host: get rid of cpu_is_omap..() macros

[Roger Quadros]

On 11/28/2012 06:36 PM, Tony Lindgren wrote:
> * Roger Quadros <rogerq@ti.com> [121128 06:51]:
>> Instead of using cpu_is_omap..() macros in the device driver we
>> rely on information provided in the platform data.
>>
>> The only information we need is whether the USB Host module has
>> a single ULPI bypass control bit for all ports or individual bypass
>> control bits for each port. OMAP3 REV2.1 and earlier have the former.
> 
> Does this depend on the other patches in this series? If not,
> this should be applied first as this is blocking omap multiplatform
> development. And this too needs to be updated for the new location
> of usb-omap.h in linux next.

OK. I'll send this patch separately based on top of linux-next.

> 
> Other than that:
> 
> Acked-by: Tony Lindgren <tony@atomide.com>

Thanks.

cheers,
-roger

[PATCH v2 12/22] mfd: omap-usb-host: know about number of ports from revision register

[Roger Quadros]

The revision register should tell us how many ports are present.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 drivers/mfd/omap-usb-host.c |   32 +++++++++++++++++++++++++++-----
 1 files changed, 27 insertions(+), 5 deletions(-)

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index afa0ff6..87b574b 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -89,6 +89,8 @@
 
 
 struct usbhs_hcd_omap {
+	int				nports;
+
 	struct clk			*xclk60mhsp1_ck;
 	struct clk			*xclk60mhsp2_ck;
 	struct clk			*utmi_p1_fck;
@@ -351,8 +353,6 @@ static void omap_usbhs_init(struct device *dev)
 
 	pm_runtime_get_sync(dev);
 	spin_lock_irqsave(&omap->lock, flags);
-	omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
-	dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
 
 	reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
 	/* setup ULPI bypass and burst configurations */
@@ -485,8 +485,32 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 
 	pm_runtime_enable(dev);
 
+	platform_set_drvdata(pdev, omap);
+	pm_runtime_get_sync(dev);
 
-	for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
+	omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
+
+	/* we need to call runtime suspend before we update omap->nports
+	 * to prevent unbalanced clk_disable()
+	 */
+	pm_runtime_put_sync(dev);
+
+	switch (omap->usbhs_rev) {
+	case OMAP_USBHS_REV1:
+		omap->nports = 3;
+		break;
+	case OMAP_USBHS_REV2:
+		omap->nports = 2;
+		break;
+	default:
+		omap->nports = OMAP3_HS_USB_PORTS;
+		dev_dbg(dev,
+		  "USB HOST Rev : 0x%d not recognized, assuming %d ports\n",
+		   omap->usbhs_rev, omap->nports);
+		break;
+	}
+
+	for (i = 0; i < omap->nports; i++)
 		if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) ||
 			is_ehci_hsic_mode(i)) {
 			omap->ehci_logic_fck = clk_get(dev, "ehci_logic_fck");
@@ -576,8 +600,6 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 				"failed error:%d\n", ret);
 	}
 
-	platform_set_drvdata(pdev, omap);
-
 	omap_usbhs_init(dev);
 	ret = omap_usbhs_alloc_children(pdev);
 	if (ret) {
-- 
1.7.4.1

[PATCH v2 13/22] mfd: omap-usb-host: override number of ports from platform data

[Roger Quadros]

Both OMAP4 and 5 exhibit the same revision ID in the REVISION register
but they have different number of ports i.e. 2 and 3 respectively.
So we can't rely on REVISION register for number of ports on OMAP5
and depend on platform data (or device tree) instead.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 arch/arm/mach-omap2/usb-host.c        |    1 +
 arch/arm/plat-omap/include/plat/usb.h |    2 +
 drivers/mfd/omap-usb-host.c           |   34 ++++++++++++++++++++------------
 3 files changed, 24 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 3c43449..eb85528 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -504,6 +504,7 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 	ohci_data.es2_compatibility = pdata->es2_compatibility;
 	usbhs_data.ehci_data = &ehci_data;
 	usbhs_data.ohci_data = &ohci_data;
+	usbhs_data.nports = pdata->nports;
 
 	if (cpu_is_omap34xx()) {
 		setup_ehci_io_mux(pdata->port_mode);
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 87ee140..6b618a1 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -27,6 +27,7 @@ enum usbhs_omap_port_mode {
 };
 
 struct usbhs_omap_board_data {
+	int				nports;
 	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
 
 	/* have to be valid if phy_reset is true and portx is in phy mode */
@@ -59,6 +60,7 @@ struct ohci_hcd_omap_platform_data {
 };
 
 struct usbhs_omap_platform_data {
+	int					nports;
 	enum usbhs_omap_port_mode		port_mode[OMAP3_HS_USB_PORTS];
 
 	struct ehci_hcd_omap_platform_data	*ehci_data;
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 87b574b..fda235a 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -495,19 +495,27 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 	 */
 	pm_runtime_put_sync(dev);
 
-	switch (omap->usbhs_rev) {
-	case OMAP_USBHS_REV1:
-		omap->nports = 3;
-		break;
-	case OMAP_USBHS_REV2:
-		omap->nports = 2;
-		break;
-	default:
-		omap->nports = OMAP3_HS_USB_PORTS;
-		dev_dbg(dev,
-		  "USB HOST Rev : 0x%d not recognized, assuming %d ports\n",
-		   omap->usbhs_rev, omap->nports);
-		break;
+	/*
+	 * If platform data contains nports then use that
+	 * else make out number of ports from USBHS revision
+	 */
+	if (pdata->nports) {
+			omap->nports = pdata->nports;
+	} else {
+		switch (omap->usbhs_rev) {
+		case OMAP_USBHS_REV1:
+			omap->nports = 3;
+			break;
+		case OMAP_USBHS_REV2:
+			omap->nports = 2;
+			break;
+		default:
+			omap->nports = OMAP3_HS_USB_PORTS;
+			dev_dbg(dev,
+			"USB HOST Rev:0x%d not recognized, assuming %d ports\n",
+				omap->usbhs_rev, omap->nports);
+			break;
+		}
 	}
 
 	for (i = 0; i < omap->nports; i++)
-- 
1.7.4.1

Re: [PATCH v2 13/22] mfd: omap-usb-host: override number of ports from platform data

[Tony Lindgren]

* Roger Quadros <rogerq@ti.com> [121128 06:52]:
> Both OMAP4 and 5 exhibit the same revision ID in the REVISION register
> but they have different number of ports i.e. 2 and 3 respectively.
> So we can't rely on REVISION register for number of ports on OMAP5
> and depend on platform data (or device tree) instead.
> 
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
>  arch/arm/mach-omap2/usb-host.c        |    1 +
>  arch/arm/plat-omap/include/plat/usb.h |    2 +
>  drivers/mfd/omap-usb-host.c           |   34 ++++++++++++++++++++------------
>  3 files changed, 24 insertions(+), 13 deletions(-)

Note that plat/usb.h is now include/linux/platform_data/usb-omap.h
in linux next so you need to coordinate with that.

For the arch/arm/*omap*/* parts:

Acked-by: Tony Lindgren <tony@atomide.com>
 
> diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
> index 3c43449..eb85528 100644
> --- a/arch/arm/mach-omap2/usb-host.c
> +++ b/arch/arm/mach-omap2/usb-host.c
> @@ -504,6 +504,7 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
>  	ohci_data.es2_compatibility = pdata->es2_compatibility;
>  	usbhs_data.ehci_data = &ehci_data;
>  	usbhs_data.ohci_data = &ohci_data;
> +	usbhs_data.nports = pdata->nports;
>  
>  	if (cpu_is_omap34xx()) {
>  		setup_ehci_io_mux(pdata->port_mode);
> diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
> index 87ee140..6b618a1 100644
> --- a/arch/arm/plat-omap/include/plat/usb.h
> +++ b/arch/arm/plat-omap/include/plat/usb.h
> @@ -27,6 +27,7 @@ enum usbhs_omap_port_mode {
>  };
>  
>  struct usbhs_omap_board_data {
> +	int				nports;
>  	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
>  
>  	/* have to be valid if phy_reset is true and portx is in phy mode */
> @@ -59,6 +60,7 @@ struct ohci_hcd_omap_platform_data {
>  };
>  
>  struct usbhs_omap_platform_data {
> +	int					nports;
>  	enum usbhs_omap_port_mode		port_mode[OMAP3_HS_USB_PORTS];
>  
>  	struct ehci_hcd_omap_platform_data	*ehci_data;
> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
> index 87b574b..fda235a 100644
> --- a/drivers/mfd/omap-usb-host.c
> +++ b/drivers/mfd/omap-usb-host.c
> @@ -495,19 +495,27 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
>  	 */
>  	pm_runtime_put_sync(dev);
>  
> -	switch (omap->usbhs_rev) {
> -	case OMAP_USBHS_REV1:
> -		omap->nports = 3;
> -		break;
> -	case OMAP_USBHS_REV2:
> -		omap->nports = 2;
> -		break;
> -	default:
> -		omap->nports = OMAP3_HS_USB_PORTS;
> -		dev_dbg(dev,
> -		  "USB HOST Rev : 0x%d not recognized, assuming %d ports\n",
> -		   omap->usbhs_rev, omap->nports);
> -		break;
> +	/*
> +	 * If platform data contains nports then use that
> +	 * else make out number of ports from USBHS revision
> +	 */
> +	if (pdata->nports) {
> +			omap->nports = pdata->nports;
> +	} else {
> +		switch (omap->usbhs_rev) {
> +		case OMAP_USBHS_REV1:
> +			omap->nports = 3;
> +			break;
> +		case OMAP_USBHS_REV2:
> +			omap->nports = 2;
> +			break;
> +		default:
> +			omap->nports = OMAP3_HS_USB_PORTS;
> +			dev_dbg(dev,
> +			"USB HOST Rev:0x%d not recognized, assuming %d ports\n",
> +				omap->usbhs_rev, omap->nports);
> +			break;
> +		}
>  	}
>  
>  	for (i = 0; i < omap->nports; i++)
> -- 
> 1.7.4.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 13/22] mfd: omap-usb-host: override number of ports from platform data

[Sergei Shtylyov]

Hello.

On 28-11-2012 18:49, Roger Quadros wrote:

> Both OMAP4 and 5 exhibit the same revision ID in the REVISION register
> but they have different number of ports i.e. 2 and 3 respectively.
> So we can't rely on REVISION register for number of ports on OMAP5
> and depend on platform data (or device tree) instead.

> Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
[...]

> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
> index 87b574b..fda235a 100644
> --- a/drivers/mfd/omap-usb-host.c
> +++ b/drivers/mfd/omap-usb-host.c
> @@ -495,19 +495,27 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
>   	 */
>   	pm_runtime_put_sync(dev);
>
> -	switch (omap->usbhs_rev) {
> -	case OMAP_USBHS_REV1:
> -		omap->nports = 3;
> -		break;
> -	case OMAP_USBHS_REV2:
> -		omap->nports = 2;
> -		break;
> -	default:
> -		omap->nports = OMAP3_HS_USB_PORTS;
> -		dev_dbg(dev,
> -		  "USB HOST Rev : 0x%d not recognized, assuming %d ports\n",
> -		   omap->usbhs_rev, omap->nports);
> -		break;
> +	/*
> +	 * If platform data contains nports then use that
> +	 * else make out number of ports from USBHS revision
> +	 */
> +	if (pdata->nports) {
> +			omap->nports = pdata->nports;

    Overindented line?

> +	} else {
> +		switch (omap->usbhs_rev) {
> +		case OMAP_USBHS_REV1:
> +			omap->nports = 3;
> +			break;
> +		case OMAP_USBHS_REV2:
> +			omap->nports = 2;
> +			break;
> +		default:
> +			omap->nports = OMAP3_HS_USB_PORTS;
> +			dev_dbg(dev,
> +			"USB HOST Rev:0x%d not recognized, assuming %d ports\n",

    Indent this string a bit to the right please.

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 13/22] mfd: omap-usb-host: override number of ports from platform data

[Roger Quadros]

On 12/02/2012 07:14 PM, Sergei Shtylyov wrote:
> Hello.
> 
> On 28-11-2012 18:49, Roger Quadros wrote:
> 
>> Both OMAP4 and 5 exhibit the same revision ID in the REVISION register
>> but they have different number of ports i.e. 2 and 3 respectively.
>> So we can't rely on REVISION register for number of ports on OMAP5
>> and depend on platform data (or device tree) instead.
> 
>> Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> [...]
> 
>> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
>> index 87b574b..fda235a 100644
>> --- a/drivers/mfd/omap-usb-host.c
>> +++ b/drivers/mfd/omap-usb-host.c
>> @@ -495,19 +495,27 @@ static int __devinit usbhs_omap_probe(struct
>> platform_device *pdev)
>>        */
>>       pm_runtime_put_sync(dev);
>>
>> -    switch (omap->usbhs_rev) {
>> -    case OMAP_USBHS_REV1:
>> -        omap->nports = 3;
>> -        break;
>> -    case OMAP_USBHS_REV2:
>> -        omap->nports = 2;
>> -        break;
>> -    default:
>> -        omap->nports = OMAP3_HS_USB_PORTS;
>> -        dev_dbg(dev,
>> -          "USB HOST Rev : 0x%d not recognized, assuming %d ports\n",
>> -           omap->usbhs_rev, omap->nports);
>> -        break;
>> +    /*
>> +     * If platform data contains nports then use that
>> +     * else make out number of ports from USBHS revision
>> +     */
>> +    if (pdata->nports) {
>> +            omap->nports = pdata->nports;
> 
>    Overindented line?

Sorry, I didn't get it. Did you mean extra tab/space?

> 
>> +    } else {
>> +        switch (omap->usbhs_rev) {
>> +        case OMAP_USBHS_REV1:
>> +            omap->nports = 3;
>> +            break;
>> +        case OMAP_USBHS_REV2:
>> +            omap->nports = 2;
>> +            break;
>> +        default:
>> +            omap->nports = OMAP3_HS_USB_PORTS;
>> +            dev_dbg(dev,
>> +            "USB HOST Rev:0x%d not recognized, assuming %d ports\n",
> 
>    Indent this string a bit to the right please.

OK.

cheers,
-roger

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 13/22] mfd: omap-usb-host: override number of ports from platform data

[Sergei Shtylyov]

Hello.

On 03-12-2012 19:58, Roger Quadros wrote:

>> On 28-11-2012 18:49, Roger Quadros wrote:

>>> Both OMAP4 and 5 exhibit the same revision ID in the REVISION register
>>> but they have different number of ports i.e. 2 and 3 respectively.
>>> So we can't rely on REVISION register for number of ports on OMAP5
>>> and depend on platform data (or device tree) instead.

>>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>> [...]

>>> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
>>> index 87b574b..fda235a 100644
>>> --- a/drivers/mfd/omap-usb-host.c
>>> +++ b/drivers/mfd/omap-usb-host.c
>>> @@ -495,19 +495,27 @@ static int __devinit usbhs_omap_probe(struct
>>> platform_device *pdev)
>>>         */
>>>        pm_runtime_put_sync(dev);
>>>
>>> -    switch (omap->usbhs_rev) {
>>> -    case OMAP_USBHS_REV1:
>>> -        omap->nports = 3;
>>> -        break;
>>> -    case OMAP_USBHS_REV2:
>>> -        omap->nports = 2;
>>> -        break;
>>> -    default:
>>> -        omap->nports = OMAP3_HS_USB_PORTS;
>>> -        dev_dbg(dev,
>>> -          "USB HOST Rev : 0x%d not recognized, assuming %d ports\n",
>>> -           omap->usbhs_rev, omap->nports);
>>> -        break;
>>> +    /*
>>> +     * If platform data contains nports then use that
>>> +     * else make out number of ports from USBHS revision
>>> +     */
>>> +    if (pdata->nports) {
>>> +            omap->nports = pdata->nports;

>>     Overindented line?

> Sorry, I didn't get it. Did you mean extra tab/space?

    Extra tab, yes.

WBR, Sergei

[PATCH v2 14/22] mfd: omap-usb-host: cleanup clock management code

[Roger Quadros]

All ports have similarly named port clocks so we can
bunch them into a port data structure and use for loop
to enable/disable the clocks.

Dynamically allocate and get clocks based on number of ports
available on the platform

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 drivers/mfd/omap-usb-host.c |  159 ++++++++++++++++++++++---------------------
 1 files changed, 80 insertions(+), 79 deletions(-)

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index fda235a..b596e10 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -90,13 +90,10 @@
 
 struct usbhs_hcd_omap {
 	int				nports;
+	struct clk			**utmi_clk;
 
 	struct clk			*xclk60mhsp1_ck;
 	struct clk			*xclk60mhsp2_ck;
-	struct clk			*utmi_p1_fck;
-	struct clk			*usbhost_p1_fck;
-	struct clk			*utmi_p2_fck;
-	struct clk			*usbhost_p2_fck;
 	struct clk			*init_60m_fclk;
 	struct clk			*ehci_logic_fck;
 
@@ -280,6 +277,7 @@ static int usbhs_runtime_resume(struct device *dev)
 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
 	unsigned long			flags;
 	struct usbhs_omap_platform_data *pdata = omap->pdata;
+	int i, r;
 
 	dev_dbg(dev, "usbhs_runtime_resume\n");
 
@@ -289,13 +287,18 @@ static int usbhs_runtime_resume(struct device *dev)
 	if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck))
 		clk_enable(omap->ehci_logic_fck);
 
-	if (is_ehci_tll_mode(pdata->port_mode[0]))
-		clk_enable(omap->usbhost_p1_fck);
-	if (is_ehci_tll_mode(pdata->port_mode[1]))
-		clk_enable(omap->usbhost_p2_fck);
-
-	clk_enable(omap->utmi_p1_fck);
-	clk_enable(omap->utmi_p2_fck);
+	for (i = 0; i < omap->nports; i++) {
+		if (is_ehci_tll_mode(pdata->port_mode[i])) {
+			if (omap->utmi_clk[i]) {
+				r = clk_enable(omap->utmi_clk[i]);
+				if (r) {
+					dev_err(dev,
+					 "Can't enable port %d clk : %d\n",
+					 i, r);
+				}
+			}
+		}
+	}
 
 	spin_unlock_irqrestore(&omap->lock, flags);
 
@@ -307,18 +310,18 @@ static int usbhs_runtime_suspend(struct device *dev)
 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
 	unsigned long			flags;
 	struct usbhs_omap_platform_data *pdata = omap->pdata;
+	int i;
 
 	dev_dbg(dev, "usbhs_runtime_suspend\n");
 
 	spin_lock_irqsave(&omap->lock, flags);
 
-	if (is_ehci_tll_mode(pdata->port_mode[0]))
-		clk_disable(omap->usbhost_p1_fck);
-	if (is_ehci_tll_mode(pdata->port_mode[1]))
-		clk_disable(omap->usbhost_p2_fck);
-
-	clk_disable(omap->utmi_p2_fck);
-	clk_disable(omap->utmi_p1_fck);
+	for (i = 0; i < omap->nports; i++) {
+		if (is_ehci_tll_mode(pdata->port_mode[i])) {
+			if (omap->utmi_clk[i])
+				clk_disable(omap->utmi_clk[i]);
+		}
+	}
 
 	if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck))
 		clk_disable(omap->ehci_logic_fck);
@@ -462,6 +465,7 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 	struct resource			*res;
 	int				ret = 0;
 	int				i;
+	bool				need_logic_fck;
 
 	if (!pdata) {
 		dev_err(dev, "Missing platform data\n");
@@ -518,76 +522,79 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 		}
 	}
 
-	for (i = 0; i < omap->nports; i++)
+	i = sizeof(struct clk *) * omap->nports;
+	omap->utmi_clk = devm_kzalloc(dev, i, GFP_KERNEL);
+	if (!omap->utmi_clk) {
+		dev_err(dev, "Memory allocation failed\n");
+		ret = -ENOMEM;
+		goto err_mem;
+	}
+
+	need_logic_fck = false;
+	for (i = 0; i < omap->nports; i++) {
 		if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) ||
-			is_ehci_hsic_mode(i)) {
-			omap->ehci_logic_fck = clk_get(dev, "ehci_logic_fck");
-			if (IS_ERR(omap->ehci_logic_fck)) {
-				ret = PTR_ERR(omap->ehci_logic_fck);
-				dev_warn(dev, "ehci_logic_fck failed:%d\n",
-					 ret);
-			}
-			break;
-		}
+			is_ehci_hsic_mode(i))
+				need_logic_fck |= true;
+	}
 
-	omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
-	if (IS_ERR(omap->utmi_p1_fck)) {
-		ret = PTR_ERR(omap->utmi_p1_fck);
-		dev_err(dev, "utmi_p1_gfclk failed error:%d\n",	ret);
-		goto err_end;
+	if (need_logic_fck) {
+		omap->ehci_logic_fck = clk_get(dev, "ehci_logic_fck");
+		if (IS_ERR(omap->ehci_logic_fck)) {
+			ret = PTR_ERR(omap->ehci_logic_fck);
+			dev_dbg(dev, "ehci_logic_fck failed:%d\n", ret);
+		}
 	}
 
 	omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
 	if (IS_ERR(omap->xclk60mhsp1_ck)) {
 		ret = PTR_ERR(omap->xclk60mhsp1_ck);
 		dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
-		goto err_utmi_p1_fck;
-	}
-
-	omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
-	if (IS_ERR(omap->utmi_p2_fck)) {
-		ret = PTR_ERR(omap->utmi_p2_fck);
-		dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
-		goto err_xclk60mhsp1_ck;
+		goto err_xclk60mhsp1;
 	}
 
 	omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
 	if (IS_ERR(omap->xclk60mhsp2_ck)) {
 		ret = PTR_ERR(omap->xclk60mhsp2_ck);
 		dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
-		goto err_utmi_p2_fck;
-	}
-
-	omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
-	if (IS_ERR(omap->usbhost_p1_fck)) {
-		ret = PTR_ERR(omap->usbhost_p1_fck);
-		dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
-		goto err_xclk60mhsp2_ck;
-	}
-
-	omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
-	if (IS_ERR(omap->usbhost_p2_fck)) {
-		ret = PTR_ERR(omap->usbhost_p2_fck);
-		dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
-		goto err_usbhost_p1_fck;
+		goto err_xclk60mhsp2;
 	}
 
 	omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
 	if (IS_ERR(omap->init_60m_fclk)) {
 		ret = PTR_ERR(omap->init_60m_fclk);
 		dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
-		goto err_usbhost_p2_fck;
+		goto err_init60m;
+	}
+
+	for (i = 0; i < omap->nports; i++) {
+		struct clk *pclk;
+		char clkname[] = "usb_host_hs_utmi_px_clk";
+
+		/* clock names are indexed from 1*/
+		snprintf(clkname, sizeof(clkname),
+				"usb_host_hs_utmi_p%d_clk", i + 1);
+
+		/* If a clock is not found we won't bail out as not all
+		 * platforms have all clocks and we can function without
+		 * them
+		 */
+		pclk = clk_get(dev, clkname);
+		if (IS_ERR(pclk))
+			dev_dbg(dev, "Failed to get clock : %s : %ld\n",
+				clkname, PTR_ERR(pclk));
+		else
+			omap->utmi_clk[i] = pclk;
 	}
 
 	if (is_ehci_phy_mode(pdata->port_mode[0])) {
 		/* for OMAP3 , the clk set paretn fails */
-		ret = clk_set_parent(omap->utmi_p1_fck,
+		ret = clk_set_parent(omap->utmi_clk[0],
 					omap->xclk60mhsp1_ck);
 		if (ret != 0)
 			dev_err(dev, "xclk60mhsp1_ck set parent"
 				"failed error:%d\n", ret);
 	} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
-		ret = clk_set_parent(omap->utmi_p1_fck,
+		ret = clk_set_parent(omap->utmi_clk[0],
 					omap->init_60m_fclk);
 		if (ret != 0)
 			dev_err(dev, "init_60m_fclk set parent"
@@ -595,13 +602,13 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 	}
 
 	if (is_ehci_phy_mode(pdata->port_mode[1])) {
-		ret = clk_set_parent(omap->utmi_p2_fck,
+		ret = clk_set_parent(omap->utmi_clk[1],
 					omap->xclk60mhsp2_ck);
 		if (ret != 0)
 			dev_err(dev, "xclk60mhsp2_ck set parent"
 					"failed error:%d\n", ret);
 	} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
-		ret = clk_set_parent(omap->utmi_p2_fck,
+		ret = clk_set_parent(omap->utmi_clk[1],
 						omap->init_60m_fclk);
 		if (ret != 0)
 			dev_err(dev, "init_60m_fclk set parent"
@@ -619,28 +626,21 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 
 err_alloc:
 	omap_usbhs_deinit(&pdev->dev);
-	clk_put(omap->init_60m_fclk);
 
-err_usbhost_p2_fck:
-	clk_put(omap->usbhost_p2_fck);
+	for (i = 0; i < omap->nports; i++)
+		clk_put(omap->utmi_clk[i]);
 
-err_usbhost_p1_fck:
-	clk_put(omap->usbhost_p1_fck);
+	clk_put(omap->init_60m_fclk);
 
-err_xclk60mhsp2_ck:
+err_init60m:
 	clk_put(omap->xclk60mhsp2_ck);
 
-err_utmi_p2_fck:
-	clk_put(omap->utmi_p2_fck);
-
-err_xclk60mhsp1_ck:
+err_xclk60mhsp2:
 	clk_put(omap->xclk60mhsp1_ck);
 
-err_utmi_p1_fck:
-	clk_put(omap->utmi_p1_fck);
-
-err_end:
+err_xclk60mhsp1:
 	clk_put(omap->ehci_logic_fck);
+err_mem:
 	pm_runtime_disable(dev);
 
 	return ret;
@@ -655,15 +655,16 @@ err_end:
 static int __devexit usbhs_omap_remove(struct platform_device *pdev)
 {
 	struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
+	int i;
 
 	omap_usbhs_deinit(&pdev->dev);
+
+	for (i = 0; i < omap->nports; i++)
+		clk_put(omap->utmi_clk[i]);
+
 	clk_put(omap->init_60m_fclk);
-	clk_put(omap->usbhost_p2_fck);
-	clk_put(omap->usbhost_p1_fck);
 	clk_put(omap->xclk60mhsp2_ck);
-	clk_put(omap->utmi_p2_fck);
 	clk_put(omap->xclk60mhsp1_ck);
-	clk_put(omap->utmi_p1_fck);
 	clk_put(omap->ehci_logic_fck);
 	pm_runtime_disable(&pdev->dev);
 
-- 
1.7.4.1

[PATCH v2 16/22] mfd: omap-usb-host: Manage HSIC clocks for HSIC mode

[Roger Quadros]

Enable the optional HSIC clocks (60MHz and 480MHz) for the ports
that are configured in HSIC mode.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 drivers/mfd/omap-usb-host.c |   77 +++++++++++++++++++++++++++++++++++++++---
 1 files changed, 71 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index b596e10..3b402b7 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -91,6 +91,8 @@
 struct usbhs_hcd_omap {
 	int				nports;
 	struct clk			**utmi_clk;
+	struct clk			**hsic60m_clk;
+	struct clk			**hsic480m_clk;
 
 	struct clk			*xclk60mhsp1_ck;
 	struct clk			*xclk60mhsp2_ck;
@@ -288,7 +290,28 @@ static int usbhs_runtime_resume(struct device *dev)
 		clk_enable(omap->ehci_logic_fck);
 
 	for (i = 0; i < omap->nports; i++) {
-		if (is_ehci_tll_mode(pdata->port_mode[i])) {
+		switch (pdata->port_mode[i]) {
+		case OMAP_EHCI_PORT_MODE_HSIC:
+			if (omap->hsic60m_clk[i]) {
+				r = clk_enable(omap->hsic60m_clk[i]);
+				if (r) {
+					dev_err(dev,
+					 "Can't enable port %d hsic60m clk:%d\n",
+					 i, r);
+				}
+			}
+
+			if (omap->hsic480m_clk[i]) {
+				r = clk_enable(omap->hsic480m_clk[i]);
+				if (r) {
+					dev_err(dev,
+					 "Can't enable port %d hsic480m clk:%d\n",
+					 i, r);
+				}
+			}
+		/* Fall through as HSIC mode needs utmi_clk */
+
+		case OMAP_EHCI_PORT_MODE_TLL:
 			if (omap->utmi_clk[i]) {
 				r = clk_enable(omap->utmi_clk[i]);
 				if (r) {
@@ -297,6 +320,9 @@ static int usbhs_runtime_resume(struct device *dev)
 					 i, r);
 				}
 			}
+			break;
+		default:
+			break;
 		}
 	}
 
@@ -317,9 +343,21 @@ static int usbhs_runtime_suspend(struct device *dev)
 	spin_lock_irqsave(&omap->lock, flags);
 
 	for (i = 0; i < omap->nports; i++) {
-		if (is_ehci_tll_mode(pdata->port_mode[i])) {
+		switch (pdata->port_mode[i]) {
+		case OMAP_EHCI_PORT_MODE_HSIC:
+			if (omap->hsic60m_clk[i])
+				clk_disable(omap->hsic60m_clk[i]);
+
+			if (omap->hsic480m_clk[i])
+				clk_disable(omap->hsic480m_clk[i]);
+		/* Fall through as utmi_clks were used in HSIC mode */
+
+		case OMAP_EHCI_PORT_MODE_TLL:
 			if (omap->utmi_clk[i])
 				clk_disable(omap->utmi_clk[i]);
+			break;
+		default:
+			break;
 		}
 	}
 
@@ -524,7 +562,10 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 
 	i = sizeof(struct clk *) * omap->nports;
 	omap->utmi_clk = devm_kzalloc(dev, i, GFP_KERNEL);
-	if (!omap->utmi_clk) {
+	omap->hsic480m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
+	omap->hsic60m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
+
+	if (!omap->utmi_clk || !omap->hsic480m_clk || !omap->hsic60m_clk) {
 		dev_err(dev, "Memory allocation failed\n");
 		ret = -ENOMEM;
 		goto err_mem;
@@ -568,7 +609,7 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 
 	for (i = 0; i < omap->nports; i++) {
 		struct clk *pclk;
-		char clkname[] = "usb_host_hs_utmi_px_clk";
+		char clkname[] = "usb_host_hs_hsic480m_px_clk";
 
 		/* clock names are indexed from 1*/
 		snprintf(clkname, sizeof(clkname),
@@ -584,6 +625,24 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 				clkname, PTR_ERR(pclk));
 		else
 			omap->utmi_clk[i] = pclk;
+
+		snprintf(clkname, sizeof(clkname),
+				"usb_host_hs_hsic480m_p%d_clk", i + 1);
+		pclk = clk_get(dev, clkname);
+		if (IS_ERR(pclk))
+			dev_dbg(dev, "Failed to get clock : %s : %ld\n",
+				clkname, PTR_ERR(pclk));
+		else
+			omap->hsic480m_clk[i] = pclk;
+
+		snprintf(clkname, sizeof(clkname),
+				"usb_host_hs_hsic60m_p%d_clk", i + 1);
+		pclk = clk_get(dev, clkname);
+		if (IS_ERR(pclk))
+			dev_dbg(dev, "Failed to get clock : %s : %ld\n",
+				clkname, PTR_ERR(pclk));
+		else
+			omap->hsic60m_clk[i] = pclk;
 	}
 
 	if (is_ehci_phy_mode(pdata->port_mode[0])) {
@@ -627,8 +686,11 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 err_alloc:
 	omap_usbhs_deinit(&pdev->dev);
 
-	for (i = 0; i < omap->nports; i++)
+	for (i = 0; i < omap->nports; i++) {
 		clk_put(omap->utmi_clk[i]);
+		clk_put(omap->hsic60m_clk[i]);
+		clk_put(omap->hsic480m_clk[i]);
+	}
 
 	clk_put(omap->init_60m_fclk);
 
@@ -659,8 +721,11 @@ static int __devexit usbhs_omap_remove(struct platform_device *pdev)
 
 	omap_usbhs_deinit(&pdev->dev);
 
-	for (i = 0; i < omap->nports; i++)
+	for (i = 0; i < omap->nports; i++) {
 		clk_put(omap->utmi_clk[i]);
+		clk_put(omap->hsic60m_clk[i]);
+		clk_put(omap->hsic480m_clk[i]);
+	}
 
 	clk_put(omap->init_60m_fclk);
 	clk_put(omap->xclk60mhsp2_ck);
-- 
1.7.4.1

[PATCH v2 17/22] mfd: omap-usb-host: Get rid of unnecessary spinlock

[Roger Quadros]

The driver does not have an interrupt handler and
we don't really need a spinlock, so get rid of it.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 drivers/mfd/omap-usb-host.c |   16 ----------------
 1 files changed, 0 insertions(+), 16 deletions(-)

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 3b402b7..62e1f21 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -23,7 +23,6 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
-#include <linux/spinlock.h>
 #include <linux/gpio.h>
 #include <plat/cpu.h>
 #include <plat/usb.h>
@@ -104,7 +103,6 @@ struct usbhs_hcd_omap {
 	struct usbhs_omap_platform_data	*pdata;
 
 	u32				usbhs_rev;
-	spinlock_t			lock;
 };
 /*-------------------------------------------------------------------------*/
 
@@ -277,14 +275,12 @@ static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
 static int usbhs_runtime_resume(struct device *dev)
 {
 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
-	unsigned long			flags;
 	struct usbhs_omap_platform_data *pdata = omap->pdata;
 	int i, r;
 
 	dev_dbg(dev, "usbhs_runtime_resume\n");
 
 	omap_tll_enable();
-	spin_lock_irqsave(&omap->lock, flags);
 
 	if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck))
 		clk_enable(omap->ehci_logic_fck);
@@ -326,22 +322,17 @@ static int usbhs_runtime_resume(struct device *dev)
 		}
 	}
 
-	spin_unlock_irqrestore(&omap->lock, flags);
-
 	return 0;
 }
 
 static int usbhs_runtime_suspend(struct device *dev)
 {
 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
-	unsigned long			flags;
 	struct usbhs_omap_platform_data *pdata = omap->pdata;
 	int i;
 
 	dev_dbg(dev, "usbhs_runtime_suspend\n");
 
-	spin_lock_irqsave(&omap->lock, flags);
-
 	for (i = 0; i < omap->nports; i++) {
 		switch (pdata->port_mode[i]) {
 		case OMAP_EHCI_PORT_MODE_HSIC:
@@ -364,7 +355,6 @@ static int usbhs_runtime_suspend(struct device *dev)
 	if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck))
 		clk_disable(omap->ehci_logic_fck);
 
-	spin_unlock_irqrestore(&omap->lock, flags);
 	omap_tll_disable();
 
 	return 0;
@@ -374,7 +364,6 @@ static void omap_usbhs_init(struct device *dev)
 {
 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
 	struct usbhs_omap_platform_data	*pdata = omap->pdata;
-	unsigned long			flags;
 	unsigned			reg;
 
 	dev_dbg(dev, "starting TI HSUSB Controller\n");
@@ -393,7 +382,6 @@ static void omap_usbhs_init(struct device *dev)
 	}
 
 	pm_runtime_get_sync(dev);
-	spin_lock_irqsave(&omap->lock, flags);
 
 	reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
 	/* setup ULPI bypass and burst configurations */
@@ -456,8 +444,6 @@ static void omap_usbhs_init(struct device *dev)
 	usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
 	dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
 
-	spin_unlock_irqrestore(&omap->lock, flags);
-
 	pm_runtime_put_sync(dev);
 	if (pdata->ehci_data->phy_reset) {
 		/* Hold the PHY in RESET for enough time till
@@ -521,8 +507,6 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 	if (!omap->uhh_base)
 		return -EADDRNOTAVAIL;
 
-	spin_lock_init(&omap->lock);
-
 	omap->pdata = pdata;
 
 	pm_runtime_enable(dev);
-- 
1.7.4.1

[PATCH v2 19/22] mfd: omap-usb-host: clean up omap_usbhs_init()

[Roger Quadros]

We split initializing revision 1 and revision 2 into different
functions. Initialization is now done dynamically so that only
the number of ports available on the system are initialized.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 drivers/mfd/omap-usb-host.c |  122 +++++++++++++++++++++++++-----------------
 1 files changed, 73 insertions(+), 49 deletions(-)

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index aaf272d..6ede319 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -359,6 +359,75 @@ static int usbhs_runtime_suspend(struct device *dev)
 	return 0;
 }
 
+static unsigned omap_usbhs_rev1_hostconfig(struct usbhs_hcd_omap *omap,
+						unsigned reg)
+{
+	struct usbhs_omap_platform_data	*pdata = omap->pdata;
+	int i;
+
+	for (i = 0; i < omap->nports; i++) {
+		switch (pdata->port_mode[i]) {
+		case OMAP_USBHS_PORT_MODE_UNUSED:
+			reg &= ~(OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS << i);
+			break;
+		case OMAP_EHCI_PORT_MODE_PHY:
+			if (pdata->single_ulpi_bypass)
+				break;
+
+			if (i == 0)
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+			else
+				reg &= ~(OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS
+								<< (i-1));
+			break;
+		default:
+			if (pdata->single_ulpi_bypass)
+				break;
+
+			if (i == 0)
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+			else
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS
+								<< (i-1);
+			break;
+		}
+	}
+
+	if (pdata->single_ulpi_bypass) {
+		/* bypass ULPI only if none of the ports use PHY mode */
+		reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+
+		for (i = 0; i < omap->nports; i++) {
+			if (is_ehci_phy_mode(pdata->port_mode[i])) {
+				reg &= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+				break;
+			}
+		}
+	}
+
+	return reg;
+}
+
+static unsigned omap_usbhs_rev2_hostconfig(struct usbhs_hcd_omap *omap,
+						unsigned reg)
+{
+	struct usbhs_omap_platform_data	*pdata = omap->pdata;
+	int i;
+
+	for (i = 0; i < omap->nports; i++) {
+		/* Clear port mode fields for PHY mode */
+		reg &= ~(OMAP4_P1_MODE_CLEAR << 2 * i);
+
+		if (is_ehci_tll_mode(pdata->port_mode[i]) ||
+				(is_ohci_port(pdata->port_mode[i])))
+			reg |= OMAP4_P1_MODE_TLL << 2 * i;
+		else if (is_ehci_hsic_mode(pdata->port_mode[i]))
+			reg |= OMAP4_P1_MODE_HSIC << 2 * i;
+	}
+
+	return reg;
+}
+
 static void omap_usbhs_init(struct device *dev)
 {
 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
@@ -390,55 +459,10 @@ static void omap_usbhs_init(struct device *dev)
 	reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK;
 	reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
 
-	if (is_omap_usbhs_rev1(omap)) {
-		if (pdata->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED)
-			reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
-		if (pdata->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED)
-			reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
-		if (pdata->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED)
-			reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
-
-		/* Bypass the TLL module for PHY mode operation */
-		if (pdata->single_ulpi_bypass) {
-			dev_dbg(dev, "OMAP3 ES version <= ES2.1\n");
-			if (is_ehci_phy_mode(pdata->port_mode[0]) ||
-				is_ehci_phy_mode(pdata->port_mode[1]) ||
-					is_ehci_phy_mode(pdata->port_mode[2]))
-				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
-			else
-				reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
-		} else {
-			dev_dbg(dev, "OMAP3 ES version > ES2.1\n");
-			if (is_ehci_phy_mode(pdata->port_mode[0]))
-				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
-			else
-				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
-			if (is_ehci_phy_mode(pdata->port_mode[1]))
-				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
-			else
-				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
-			if (is_ehci_phy_mode(pdata->port_mode[2]))
-				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
-			else
-				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
-		}
-	} else if (is_omap_usbhs_rev2(omap)) {
-		/* Clear port mode fields for PHY mode*/
-		reg &= ~OMAP4_P1_MODE_CLEAR;
-		reg &= ~OMAP4_P2_MODE_CLEAR;
-
-		if (is_ehci_tll_mode(pdata->port_mode[0]) ||
-			(is_ohci_port(pdata->port_mode[0])))
-			reg |= OMAP4_P1_MODE_TLL;
-		else if (is_ehci_hsic_mode(pdata->port_mode[0]))
-			reg |= OMAP4_P1_MODE_HSIC;
-
-		if (is_ehci_tll_mode(pdata->port_mode[1]) ||
-			(is_ohci_port(pdata->port_mode[1])))
-			reg |= OMAP4_P2_MODE_TLL;
-		else if (is_ehci_hsic_mode(pdata->port_mode[1]))
-			reg |= OMAP4_P2_MODE_HSIC;
-	}
+	if (is_omap_usbhs_rev1(omap))
+		reg = omap_usbhs_rev1_hostconfig(omap, reg);
+	else if (is_omap_usbhs_rev2(omap))
+		reg = omap_usbhs_rev2_hostconfig(omap, reg);
 
 	usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
 	dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
-- 
1.7.4.1

[PATCH v2 20/22] USB: ehci-omap: Don't free gpios that we didn't request

[Roger Quadros]

This driver does not request any gpios so don't free them.
Fixes L3 bus error on multiple modprobe/rmmod of ehci_hcd
with ehci-omap in use.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 drivers/usb/host/ehci-omap.c |    8 --------
 1 files changed, 0 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index d7fe287..7ab0002 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -290,7 +290,6 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
 {
 	struct device *dev				= &pdev->dev;
 	struct usb_hcd *hcd				= dev_get_drvdata(dev);
-	struct ehci_hcd_omap_platform_data *pdata	= dev->platform_data;
 
 	usb_remove_hcd(hcd);
 	disable_put_regulator(dev->platform_data);
@@ -300,13 +299,6 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
 	pm_runtime_put_sync(dev);
 	pm_runtime_disable(dev);
 
-	if (pdata->phy_reset) {
-		if (gpio_is_valid(pdata->reset_gpio_port[0]))
-			gpio_free(pdata->reset_gpio_port[0]);
-
-		if (gpio_is_valid(pdata->reset_gpio_port[1]))
-			gpio_free(pdata->reset_gpio_port[1]);
-	}
 	return 0;
 }
 
-- 
1.7.4.1

[PATCH v2 21/22] ARM: OMAP2+: clock data: get rid of unused USB host clock aliases

[Roger Quadros]

We don't need multiple aliases for the OMAP USB host clocks so remove them.
Also use NULL dev_id for 'usb_tll_hs_usb_ch0_clk' and 'usb_tll_hs_usb_ch1_clk'

Signed-off-by: Roger Quadros <rogerq@ti.com>
CC: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/clock3xxx_data.c |   11 -----------
 1 files changed, 0 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 0d2ee04..fc8afc8 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3297,8 +3297,6 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("usbhs_omap",	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("usbhs_tll",	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_3XXX),
 	CLK(NULL,	"mmchs3_fck",	&mmchs3_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"mmchs2_fck",	&mmchs2_fck,	CK_3XXX),
@@ -3335,8 +3333,6 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"core_l4_ick",	&core_l4_ick,	CK_3XXX),
 	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("usbhs_omap",	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("usbhs_tll",	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK("omap_hsmmc.2",	"ick",	&mmchs3_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"mmchs3_ick",	&mmchs3_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"icr_ick",	&icr_ick,	CK_34XX | CK_36XX),
@@ -3399,15 +3395,8 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"usbhost_ick",	&usbhost_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("usbhs_omap",	"usbhost_ick",	&usbhost_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"xclk60mhsp1_ck",	&dummy_ck,	CK_3XXX),
 	CLK(NULL,	"xclk60mhsp2_ck",	&dummy_ck,	CK_3XXX),
-	CLK(NULL,	"usb_host_hs_utmi_p1_clk",	&dummy_ck,	CK_3XXX),
-	CLK(NULL,	"usb_host_hs_utmi_p2_clk",	&dummy_ck,	CK_3XXX),
-	CLK("usbhs_omap",	"usb_tll_hs_usb_ch0_clk",	&dummy_ck,	CK_3XXX),
-	CLK("usbhs_omap",	"usb_tll_hs_usb_ch1_clk",	&dummy_ck,	CK_3XXX),
-	CLK("usbhs_tll",	"usb_tll_hs_usb_ch0_clk",	&dummy_ck,	CK_3XXX),
-	CLK("usbhs_tll",	"usb_tll_hs_usb_ch1_clk",	&dummy_ck,	CK_3XXX),
 	CLK(NULL,	"init_60m_fclk",	&dummy_ck,	CK_3XXX),
 	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2PLUS | CK_36XX),
 	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_3XXX),
-- 
1.7.4.1

Re: [PATCH v2 21/22] ARM: OMAP2+: clock data: get rid of unused USB host clock aliases

[Paul Walmsley]

On Wed, 28 Nov 2012, Roger Quadros wrote:

> We don't need multiple aliases for the OMAP USB host clocks so remove them.
> Also use NULL dev_id for 'usb_tll_hs_usb_ch0_clk' and 'usb_tll_hs_usb_ch1_clk'
> 
> Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> CC: Paul Walmsley <paul-DWxLp4Yu+b8AvxtiuMwx3w@public.gmane.org>
> ---
>  arch/arm/mach-omap2/clock3xxx_data.c |   11 -----------
>  1 files changed, 0 insertions(+), 11 deletions(-)

Looks okay to me, but this will need to be updated to apply after the 
common clock framework conversion patches are merged.  Maybe respin this 
against what's in arm-soc/for-next ?


- Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 22/22] mfd: omap-usb-host: Don't spam console on clk_set_parent failure

[Roger Quadros]

clk_set_parent is expected to fail on OMAP3 platforms. We don't
consider that as fatal so don't spam console.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 drivers/mfd/omap-usb-host.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 6ede319..493e010 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -653,17 +653,17 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 	}
 
 	if (is_ehci_phy_mode(pdata->port_mode[0])) {
-		/* for OMAP3 , the clk set paretn fails */
+		/* for OMAP3 , the clk set parent fails */
 		ret = clk_set_parent(omap->utmi_clk[0],
 					omap->xclk60mhsp1_ck);
 		if (ret != 0)
-			dev_err(dev, "xclk60mhsp1_ck set parent"
+			dev_dbg(dev, "xclk60mhsp1_ck set parent"
 				"failed error:%d\n", ret);
 	} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
 		ret = clk_set_parent(omap->utmi_clk[0],
 					omap->init_60m_fclk);
 		if (ret != 0)
-			dev_err(dev, "init_60m_fclk set parent"
+			dev_dbg(dev, "init_60m_fclk set parent"
 				"failed error:%d\n", ret);
 	}
 
@@ -671,13 +671,13 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 		ret = clk_set_parent(omap->utmi_clk[1],
 					omap->xclk60mhsp2_ck);
 		if (ret != 0)
-			dev_err(dev, "xclk60mhsp2_ck set parent"
+			dev_dbg(dev, "xclk60mhsp2_ck set parent"
 					"failed error:%d\n", ret);
 	} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
 		ret = clk_set_parent(omap->utmi_clk[1],
 						omap->init_60m_fclk);
 		if (ret != 0)
-			dev_err(dev, "init_60m_fclk set parent"
+			dev_dbg(dev, "init_60m_fclk set parent"
 				"failed error:%d\n", ret);
 	}
 
-- 
1.7.4.1

Re: [PATCH v2 22/22] mfd: omap-usb-host: Don't spam console on clk_set_parent failure

[Sergei Shtylyov]

Hello.

On 28-11-2012 18:49, Roger Quadros wrote:

> clk_set_parent is expected to fail on OMAP3 platforms. We don't
> consider that as fatal so don't spam console.

> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
>   drivers/mfd/omap-usb-host.c |   10 +++++-----
>   1 files changed, 5 insertions(+), 5 deletions(-)

> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
> index 6ede319..493e010 100644
> --- a/drivers/mfd/omap-usb-host.c
> +++ b/drivers/mfd/omap-usb-host.c
> @@ -653,17 +653,17 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
>   	}
>
>   	if (is_ehci_phy_mode(pdata->port_mode[0])) {
> -		/* for OMAP3 , the clk set paretn fails */
> +		/* for OMAP3 , the clk set parent fails */

    Worth removing spave before comma too.

>   		ret = clk_set_parent(omap->utmi_clk[0],
>   					omap->xclk60mhsp1_ck);
>   		if (ret != 0)
> -			dev_err(dev, "xclk60mhsp1_ck set parent"
> +			dev_dbg(dev, "xclk60mhsp1_ck set parent"

    Need space at the end of this substring, else you get "parentfailed"

>   				"failed error:%d\n", ret);
>   	} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
>   		ret = clk_set_parent(omap->utmi_clk[0],
>   					omap->init_60m_fclk);
>   		if (ret != 0)
> -			dev_err(dev, "init_60m_fclk set parent"
> +			dev_dbg(dev, "init_60m_fclk set parent"

    Same here.

>   				"failed error:%d\n", ret);
>   	}
>
> @@ -671,13 +671,13 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
>   		ret = clk_set_parent(omap->utmi_clk[1],
>   					omap->xclk60mhsp2_ck);
>   		if (ret != 0)
> -			dev_err(dev, "xclk60mhsp2_ck set parent"
> +			dev_dbg(dev, "xclk60mhsp2_ck set parent"

    Same here.

>   					"failed error:%d\n", ret);
>   	} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
>   		ret = clk_set_parent(omap->utmi_clk[1],
>   						omap->init_60m_fclk);
>   		if (ret != 0)
> -			dev_err(dev, "init_60m_fclk set parent"
> +			dev_dbg(dev, "init_60m_fclk set parent"

    And here.

>   				"failed error:%d\n", ret);

WBR, Sergei

Re: [PATCH v2 22/22] mfd: omap-usb-host: Don't spam console on clk_set_parent failure

[Bjørn Mork]

Sergei Shtylyov <sshtylyov@mvista.com> writes:
> On 28-11-2012 18:49, Roger Quadros wrote:
>>   		ret = clk_set_parent(omap->utmi_clk[0],
>>   					omap->xclk60mhsp1_ck);
>>   		if (ret != 0)
>> -			dev_err(dev, "xclk60mhsp1_ck set parent"
>> +			dev_dbg(dev, "xclk60mhsp1_ck set parent"
>
>    Need space at the end of this substring, else you get "parentfailed"
>
>>   				"failed error:%d\n", ret);


Wouldn't it be better to change all these to conform with
Documentation/CodingStyle when touching them anyway?  That would make
the missing space problem obvious as well as making the messages
greppable.

From Chapter 2: Breaking long lines and strings:

"However, never break user-visible strings such as printk messages,
because that breaks the ability to grep for them."



Bjørn
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 22/22] mfd: omap-usb-host: Don't spam console on clk_set_parent failure

[Roger Quadros]

On 12/03/2012 09:48 AM, Bjørn Mork wrote:
> Sergei Shtylyov <sshtylyov-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org> writes:
>> On 28-11-2012 18:49, Roger Quadros wrote:
>>>   		ret = clk_set_parent(omap->utmi_clk[0],
>>>   					omap->xclk60mhsp1_ck);
>>>   		if (ret != 0)
>>> -			dev_err(dev, "xclk60mhsp1_ck set parent"
>>> +			dev_dbg(dev, "xclk60mhsp1_ck set parent"
>>
>>    Need space at the end of this substring, else you get "parentfailed"
>>
>>>   				"failed error:%d\n", ret);
> 
> 
> Wouldn't it be better to change all these to conform with
> Documentation/CodingStyle when touching them anyway?  That would make
> the missing space problem obvious as well as making the messages
> greppable.
> 
> From Chapter 2: Breaking long lines and strings:
> 
> "However, never break user-visible strings such as printk messages,
> because that breaks the ability to grep for them."
> 

Agreed. I'll fix it in next spin. Thanks.

cheers,
-roger

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 22/22] mfd: omap-usb-host: Don't spam console on clk_set_parent failure

[Roger Quadros]

On 12/02/2012 07:10 PM, Sergei Shtylyov wrote:
> Hello.
> 
> On 28-11-2012 18:49, Roger Quadros wrote:
> 
>> clk_set_parent is expected to fail on OMAP3 platforms. We don't
>> consider that as fatal so don't spam console.
> 
>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>> ---
>>   drivers/mfd/omap-usb-host.c |   10 +++++-----
>>   1 files changed, 5 insertions(+), 5 deletions(-)
> 
>> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
>> index 6ede319..493e010 100644
>> --- a/drivers/mfd/omap-usb-host.c
>> +++ b/drivers/mfd/omap-usb-host.c
>> @@ -653,17 +653,17 @@ static int __devinit usbhs_omap_probe(struct
>> platform_device *pdev)
>>       }
>>
>>       if (is_ehci_phy_mode(pdata->port_mode[0])) {
>> -        /* for OMAP3 , the clk set paretn fails */
>> +        /* for OMAP3 , the clk set parent fails */
> 
>    Worth removing spave before comma too.
>
All valid points. Thanks for review.

cheers,
-roger