[PATCH v3 00/11] usb: dwc3 core/dwc3-omap: add dt support

[PATCH v3 00/11] usb: dwc3 core/dwc3-omap: add dt support

[Kishon Vijay Abraham I]

Changed the subject from *usb: dwc3-omap: add dt support*

Apologies for the delay in sending this version.

This patch series adds dt support to dwc3 core and fixes few minor
stuff in dwc3-omap glue to get dwc3 working.

While at that it also uses *of_platform* to create the child device
(dwc3-core) and fixes to use runtime API's to enable clock and write
to SYSCONFIG register.

Changes from v2:
* Removed platform data usage from dwc3-omap since OMAP5 is not going
  to have non dt support
* Added a patch to stop using nop-usb-xceiv
* Added a patch enable the USB2 and USB3 phy in probe
* Misc cleanup

Changes from v1:
* made device_for_each_child() as a seperate patch
* made all other minor fixes wrt typos and function renames

This patch series is developed on
git://github.com/rrnayak/linux.git omap5-3.8-rc4-base-palmas

I've kept this patch series and all the patch series to follow in a single branch
git://gitorious.org/linux-usb/linux-usb.git omap5-with-palmas
(changes up to 23b4dfa2ab7052569cd88acc6383c4b1a8e8a482)

Did enumeration testing on omap5 evm.

Kishon Vijay Abraham I (11):
  usb: dwc3-omap: use device_for_each_child to handle child removal
  usb: dwc3-omap: use of_platform API to create dwc3 core pdev
  usb: dwc3-omap: use runtime API's to enable clocks
  usb: dwc3-omap: Remove explicit writes to SYSCONFIG register
  usb: dwc3-omap: Add an API to write to dwc mailbox
  usb: dwc3-omap: Minor fixes to get dt working
  usb: dwc3-omap: remove platform data associated with dwc3-omap
  usb: dwc3: dwc3-omap: stop using nop-usb-xceiv
  usb: dwc3: core: add dt support for dwc3 core
  usb: dwc3: core: enable the USB2 and USB3 phy in probe
  usb: dwc3: core: stray statements are removed

 Documentation/devicetree/bindings/usb/dwc3.txt     |   22 ++
 Documentation/devicetree/bindings/usb/omap-usb.txt |   28 +++
 drivers/usb/dwc3/core.c                            |   31 ++-
 drivers/usb/dwc3/dwc3-omap.c                       |  242 ++++++++------------
 include/linux/platform_data/dwc3-omap.h            |    4 -
 include/linux/usb/dwc3-omap.h                      |   30 +++
 6 files changed, 206 insertions(+), 151 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/dwc3.txt
 create mode 100644 include/linux/usb/dwc3-omap.h

-- 
1.7.9.5

[PATCH v3 01/11] usb: dwc3-omap: use device_for_each_child to handle child removal

[Kishon Vijay Abraham I]

Used device_for_each_child() to handle child device (dwc3 core) removal
during devexit of dwc3 omap. This is in preparation for creating the child
devices from subnode of dwc3 omap glue using of_platform_populate.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/usb/dwc3/dwc3-omap.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index f31867f..1d03a8a 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -262,6 +262,15 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
 	return IRQ_HANDLED;
 }
 
+static int dwc3_omap_remove_core(struct device *dev, void *c)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	platform_device_unregister(pdev);
+
+	return 0;
+}
+
 static int dwc3_omap_probe(struct platform_device *pdev)
 {
 	struct dwc3_omap_data	*pdata = pdev->dev.platform_data;
@@ -425,9 +434,10 @@ static int dwc3_omap_remove(struct platform_device *pdev)
 {
 	struct dwc3_omap	*omap = platform_get_drvdata(pdev);
 
-	platform_device_unregister(omap->dwc3);
 	platform_device_unregister(omap->usb2_phy);
 	platform_device_unregister(omap->usb3_phy);
+	device_for_each_child(&pdev->dev, NULL, dwc3_omap_remove_core);
+
 	return 0;
 }
 
-- 
1.7.9.5

[PATCH v3 03/11] usb: dwc3-omap: use runtime API's to enable clocks

[Kishon Vijay Abraham I]

Before accessing any register, runtime API's should be invoked to enable
the clocks. runtime API's are added here to prevent abort during register
access.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/usb/dwc3/dwc3-omap.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 78bb2f6..8094230 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -43,6 +43,7 @@
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/dwc3-omap.h>
+#include <linux/pm_runtime.h>
 #include <linux/dma-mapping.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
@@ -336,6 +337,13 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 	omap->irq	= irq;
 	omap->base	= base;
 
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		dev_err(dev, "get_sync failed with err %d\n", ret);
+		return ret;
+	}
+
 	reg = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
 
 	utmi_mode = of_get_property(node, "utmi-mode", &size);
@@ -416,6 +424,8 @@ static int dwc3_omap_remove(struct platform_device *pdev)
 
 	platform_device_unregister(omap->usb2_phy);
 	platform_device_unregister(omap->usb3_phy);
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
 	device_for_each_child(&pdev->dev, NULL, dwc3_omap_remove_core);
 
 	return 0;
-- 
1.7.9.5

[PATCH v3 05/11] usb: dwc3-omap: Add an API to write to dwc mailbox

[Kishon Vijay Abraham I]

Add an API in the omap glue layer to write to the mailbox register which
can be used by comparator driver(twl). To pass the detection of the attached
device (signified by VBUS, ID) to the dwc3 core, dwc3 core has to write
to the mailbox regiter.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/usb/dwc3/dwc3-omap.c  |   60 +++++++++++++++++++++++++++++++++++++++++
 include/linux/usb/dwc3-omap.h |   30 +++++++++++++++++++++
 2 files changed, 90 insertions(+)
 create mode 100644 include/linux/usb/dwc3-omap.h

diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index f85ae5e..831b75f 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -43,6 +43,7 @@
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/dwc3-omap.h>
+#include <linux/usb/dwc3-omap.h>
 #include <linux/pm_runtime.h>
 #include <linux/dma-mapping.h>
 #include <linux/ioport.h>
@@ -131,6 +132,8 @@ struct dwc3_omap {
 	u32			dma_status:1;
 };
 
+struct dwc3_omap		*_omap;
+
 static inline u32 dwc3_omap_readl(void __iomem *base, u32 offset)
 {
 	return readl(base + offset);
@@ -141,6 +144,57 @@ static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value)
 	writel(value, base + offset);
 }
 
+void dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status)
+{
+	u32			val;
+	struct dwc3_omap	*omap = _omap;
+
+	switch (status) {
+	case OMAP_DWC3_ID_GROUND:
+		dev_dbg(omap->dev, "ID GND\n");
+
+		val = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
+		val &= ~(USBOTGSS_UTMI_OTG_STATUS_IDDIG
+				| USBOTGSS_UTMI_OTG_STATUS_VBUSVALID
+				| USBOTGSS_UTMI_OTG_STATUS_SESSEND);
+		val |= USBOTGSS_UTMI_OTG_STATUS_SESSVALID
+				| USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT;
+		dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, val);
+		break;
+
+	case OMAP_DWC3_VBUS_VALID:
+		dev_dbg(omap->dev, "VBUS Connect\n");
+
+		val = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
+		val &= ~USBOTGSS_UTMI_OTG_STATUS_SESSEND;
+		val |= USBOTGSS_UTMI_OTG_STATUS_IDDIG
+				| USBOTGSS_UTMI_OTG_STATUS_VBUSVALID
+				| USBOTGSS_UTMI_OTG_STATUS_SESSVALID
+				| USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT;
+		dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, val);
+		break;
+
+	case OMAP_DWC3_ID_FLOAT:
+	case OMAP_DWC3_VBUS_OFF:
+		dev_dbg(omap->dev, "VBUS Disconnect\n");
+
+		val = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
+		val &= ~(USBOTGSS_UTMI_OTG_STATUS_SESSVALID
+				| USBOTGSS_UTMI_OTG_STATUS_VBUSVALID
+				| USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT);
+		val |= USBOTGSS_UTMI_OTG_STATUS_SESSEND
+				| USBOTGSS_UTMI_OTG_STATUS_IDDIG;
+		dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, val);
+		break;
+
+	default:
+		dev_dbg(omap->dev, "ID float\n");
+	}
+
+	return;
+}
+EXPORT_SYMBOL_GPL(dwc3_omap_mailbox);
+
 static int dwc3_omap_register_phys(struct dwc3_omap *omap)
 {
 	struct nop_usb_xceiv_platform_data pdata;
@@ -320,6 +374,12 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 	omap->irq	= irq;
 	omap->base	= base;
 
+	/*
+	 * REVISIT if we ever have two instances of the wrapper, we will be
+	 * in big trouble
+	 */
+	_omap	= omap;
+
 	pm_runtime_enable(dev);
 	ret = pm_runtime_get_sync(dev);
 	if (ret < 0) {
diff --git a/include/linux/usb/dwc3-omap.h b/include/linux/usb/dwc3-omap.h
new file mode 100644
index 0000000..51eae14
--- /dev/null
+++ b/include/linux/usb/dwc3-omap.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2013 by Texas Instruments
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ */
+
+#ifndef __DWC3_OMAP_H__
+#define __DWC3_OMAP_H__
+
+enum omap_dwc3_vbus_id_status {
+	OMAP_DWC3_UNKNOWN = 0,
+	OMAP_DWC3_ID_GROUND,
+	OMAP_DWC3_ID_FLOAT,
+	OMAP_DWC3_VBUS_VALID,
+	OMAP_DWC3_VBUS_OFF,
+};
+
+#if (defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_DWC3_MODULE))
+extern void dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status);
+#else
+static inline void dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status)
+{
+	return;
+}
+#endif
+
+#endif	/* __DWC3_OMAP_H__ */
-- 
1.7.9.5

[PATCH v3 02/11] usb: dwc3-omap: use of_platform API to create dwc3 core pdev

[Kishon Vijay Abraham I]

Used of_platform_populate() to create dwc3 core platform_device
from device tree data.

Signed-off-by: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
---
 drivers/usb/dwc3/dwc3-omap.c |   40 ++++++++++------------------------------
 1 file changed, 10 insertions(+), 30 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 1d03a8a..78bb2f6 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -47,6 +47,7 @@
 #include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_platform.h>
 
 #include <linux/usb/otg.h>
 #include <linux/usb/nop-usb-xceiv.h>
@@ -133,7 +134,6 @@ struct dwc3_omap {
 	/* device lock */
 	spinlock_t		lock;
 
-	struct platform_device	*dwc3;
 	struct platform_device	*usb2_phy;
 	struct platform_device	*usb3_phy;
 	struct device		*dev;
@@ -276,7 +276,6 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 	struct dwc3_omap_data	*pdata = pdev->dev.platform_data;
 	struct device_node	*node = pdev->dev.of_node;
 
-	struct platform_device	*dwc3;
 	struct dwc3_omap	*omap;
 	struct resource		*res;
 	struct device		*dev = &pdev->dev;
@@ -323,30 +322,19 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
-	if (!dwc3) {
-		dev_err(dev, "couldn't allocate dwc3 device\n");
-		return -ENOMEM;
-	}
-
 	context = devm_kzalloc(dev, resource_size(res), GFP_KERNEL);
 	if (!context) {
 		dev_err(dev, "couldn't allocate dwc3 context memory\n");
-		goto err2;
+		return -ENOMEM;
 	}
 
 	spin_lock_init(&omap->lock);
-	dma_set_coherent_mask(&dwc3->dev, dev->coherent_dma_mask);
 
-	dwc3->dev.parent = dev;
-	dwc3->dev.dma_mask = dev->dma_mask;
-	dwc3->dev.dma_parms = dev->dma_parms;
 	omap->resource_size = resource_size(res);
 	omap->context	= context;
 	omap->dev	= dev;
 	omap->irq	= irq;
 	omap->base	= base;
-	omap->dwc3	= dwc3;
 
 	reg = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
 
@@ -391,7 +379,7 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(dev, "failed to request IRQ #%d --> %d\n",
 				omap->irq, ret);
-		goto err2;
+		return ret;
 	}
 
 	/* enable all IRQs */
@@ -410,24 +398,16 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 
 	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg);
 
-	ret = platform_device_add_resources(dwc3, pdev->resource,
-			pdev->num_resources);
-	if (ret) {
-		dev_err(dev, "couldn't add resources to dwc3 device\n");
-		goto err2;
-	}
-
-	ret = platform_device_add(dwc3);
-	if (ret) {
-		dev_err(dev, "failed to register dwc3 device\n");
-		goto err2;
+	if (node) {
+		ret = of_platform_populate(node, NULL, NULL, dev);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"failed to add create dwc3 core\n");
+			return ret;
+		}
 	}
 
 	return 0;
-
-err2:
-	platform_device_put(dwc3);
-	return ret;
 }
 
 static int dwc3_omap_remove(struct platform_device *pdev)
-- 
1.7.9.5

[PATCH v3 04/11] usb: dwc3-omap: Remove explicit writes to SYSCONFIG register

[Kishon Vijay Abraham I]

The runtime API's takes care of setting the SYSCONFIG register with
appropriate values. Hence explicit writes to SYSCONFIG register is
removed.

Signed-off-by: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
---
 drivers/usb/dwc3/dwc3-omap.c |   26 --------------------------
 1 file changed, 26 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 8094230..f85ae5e 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -80,23 +80,6 @@
 
 /* SYSCONFIG REGISTER */
 #define USBOTGSS_SYSCONFIG_DMADISABLE		(1 << 16)
-#define USBOTGSS_SYSCONFIG_STANDBYMODE(x)	((x) << 4)
-
-#define USBOTGSS_STANDBYMODE_FORCE_STANDBY	0
-#define USBOTGSS_STANDBYMODE_NO_STANDBY		1
-#define USBOTGSS_STANDBYMODE_SMART_STANDBY	2
-#define USBOTGSS_STANDBYMODE_SMART_WAKEUP	3
-
-#define USBOTGSS_STANDBYMODE_MASK		(0x03 << 4)
-
-#define USBOTGSS_SYSCONFIG_IDLEMODE(x)		((x) << 2)
-
-#define USBOTGSS_IDLEMODE_FORCE_IDLE		0
-#define USBOTGSS_IDLEMODE_NO_IDLE		1
-#define USBOTGSS_IDLEMODE_SMART_IDLE		2
-#define USBOTGSS_IDLEMODE_SMART_WAKEUP		3
-
-#define USBOTGSS_IDLEMODE_MASK			(0x03 << 2)
 
 /* IRQ_EOI REGISTER */
 #define USBOTGSS_IRQ_EOI_LINE_NUMBER		(1 << 0)
@@ -373,15 +356,6 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 	reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
 	omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE);
 
-	/* Set No-Idle and No-Standby */
-	reg &= ~(USBOTGSS_STANDBYMODE_MASK
-			| USBOTGSS_IDLEMODE_MASK);
-
-	reg |= (USBOTGSS_SYSCONFIG_STANDBYMODE(USBOTGSS_STANDBYMODE_NO_STANDBY)
-		| USBOTGSS_SYSCONFIG_IDLEMODE(USBOTGSS_IDLEMODE_NO_IDLE));
-
-	dwc3_omap_writel(omap->base, USBOTGSS_SYSCONFIG, reg);
-
 	ret = devm_request_irq(dev, omap->irq, dwc3_omap_interrupt, 0,
 			"dwc3-omap", omap);
 	if (ret) {
-- 
1.7.9.5

[PATCH v3 06/11] usb: dwc3-omap: Minor fixes to get dt working

[Kishon Vijay Abraham I]

Includes few minor fixes in dwc3-omap like populating the compatible
string in a correct way, extracting the utmi-mode property properly and
changing the index of get_irq since irq of core is removed from hwmod
entry.
Also updated the documentation with dwc3-omap device tree binding
information.

Signed-off-by: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
---
 Documentation/devicetree/bindings/usb/omap-usb.txt |   28 ++++++++++++
 drivers/usb/dwc3/dwc3-omap.c                       |   45 +++++++++-----------
 2 files changed, 49 insertions(+), 24 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index 90360e3..0177371 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -43,6 +43,34 @@ Board specific device node entry
 	power = <50>;
 };
 
+OMAP DWC3 GLUE
+ - compatible : Should be "ti,dwc3"
+ - ti,hwmods : Should be "usb_otg_ss"
+ - reg : Address and length of the register set for the device.
+ - interrupts : The irq number of this device that is used to interrupt the
+   MPU
+ - #address-cells, #size-cells : Must be present if the device has sub-nodes
+ - utmi-mode : controls the source of UTMI/PIPE status for VBUS and OTG ID.
+   It should be set to "1" for HW mode and "2" for SW mode.
+ - ranges: the child address space are mapped 1:1 onto the parent address space
+
+Sub-nodes:
+The dwc3 core should be added as subnode to omap dwc3 glue.
+- dwc3 :
+   The binding details of dwc3 can be found in:
+   Documentation/devicetree/bindings/usb/dwc3.txt
+
+omap_dwc3 {
+	compatible = "ti,dwc3";
+	ti,hwmods = "usb_otg_ss";
+	reg = <0x4a020000 0x1ff>;
+	interrupts = <0 93 4>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	utmi-mode = <2>;
+	ranges;
+};
+
 OMAP CONTROL USB
 
 Required properties:
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 831b75f..cc2ccba 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -318,11 +318,11 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 	struct resource		*res;
 	struct device		*dev = &pdev->dev;
 
-	int			size;
 	int			ret = -ENOMEM;
 	int			irq;
 
-	const u32		*utmi_mode;
+	int			utmi_mode;
+
 	u32			reg;
 
 	void __iomem		*base;
@@ -336,13 +336,13 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, omap);
 
-	irq = platform_get_irq(pdev, 1);
+	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(dev, "missing IRQ resource\n");
 		return -EINVAL;
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(dev, "missing memory base resource\n");
 		return -EINVAL;
@@ -389,25 +389,22 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 
 	reg = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
 
-	utmi_mode = of_get_property(node, "utmi-mode", &size);
-	if (utmi_mode && size == sizeof(*utmi_mode)) {
-		reg |= *utmi_mode;
-	} else {
-		if (!pdata) {
-			dev_dbg(dev, "missing platform data\n");
-		} else {
-			switch (pdata->utmi_mode) {
-			case DWC3_OMAP_UTMI_MODE_SW:
-				reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
-				break;
-			case DWC3_OMAP_UTMI_MODE_HW:
-				reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
-				break;
-			default:
-				dev_dbg(dev, "UNKNOWN utmi mode %d\n",
-						pdata->utmi_mode);
-			}
-		}
+	if (node)
+		of_property_read_u32(node, "utmi-mode", &utmi_mode);
+	else if (pdata)
+		utmi_mode = pdata->utmi_mode;
+	else
+		dev_dbg(dev, "missing platform data\n");
+
+	switch (utmi_mode) {
+	case DWC3_OMAP_UTMI_MODE_SW:
+		reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
+		break;
+	case DWC3_OMAP_UTMI_MODE_HW:
+		reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
+		break;
+	default:
+		dev_dbg(dev, "UNKNOWN utmi mode %d\n", utmi_mode);
 	}
 
 	dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg);
@@ -467,7 +464,7 @@ static int dwc3_omap_remove(struct platform_device *pdev)
 
 static const struct of_device_id of_dwc3_matach[] = {
 	{
-		"ti,dwc3",
+		.compatible =	"ti,dwc3"
 	},
 	{ },
 };
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 08/11] usb: dwc3-omap: stop using nop-usb-xceiv

[Kishon Vijay Abraham I]

Now that we have drivers for omap-usb2 phy and omap-usb3 phy, stop
using nop-usb-xceiv.

Signed-off-by: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
---
 drivers/usb/dwc3/dwc3-omap.c |   67 ------------------------------------------
 1 file changed, 67 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 4e96fbe..0c62e28 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -52,7 +52,6 @@
 #include <linux/of_platform.h>
 
 #include <linux/usb/otg.h>
-#include <linux/usb/nop-usb-xceiv.h>
 
 #include "core.h"
 
@@ -119,8 +118,6 @@ struct dwc3_omap {
 	/* device lock */
 	spinlock_t		lock;
 
-	struct platform_device	*usb2_phy;
-	struct platform_device	*usb3_phy;
 	struct device		*dev;
 
 	int			irq;
@@ -195,60 +192,6 @@ void dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status)
 }
 EXPORT_SYMBOL_GPL(dwc3_omap_mailbox);
 
-static int dwc3_omap_register_phys(struct dwc3_omap *omap)
-{
-	struct nop_usb_xceiv_platform_data pdata;
-	struct platform_device	*pdev;
-	int			ret;
-
-	memset(&pdata, 0x00, sizeof(pdata));
-
-	pdev = platform_device_alloc("nop_usb_xceiv", 0);
-	if (!pdev)
-		return -ENOMEM;
-
-	omap->usb2_phy = pdev;
-	pdata.type = USB_PHY_TYPE_USB2;
-
-	ret = platform_device_add_data(omap->usb2_phy, &pdata, sizeof(pdata));
-	if (ret)
-		goto err1;
-
-	pdev = platform_device_alloc("nop_usb_xceiv", 1);
-	if (!pdev) {
-		ret = -ENOMEM;
-		goto err1;
-	}
-
-	omap->usb3_phy = pdev;
-	pdata.type = USB_PHY_TYPE_USB3;
-
-	ret = platform_device_add_data(omap->usb3_phy, &pdata, sizeof(pdata));
-	if (ret)
-		goto err2;
-
-	ret = platform_device_add(omap->usb2_phy);
-	if (ret)
-		goto err2;
-
-	ret = platform_device_add(omap->usb3_phy);
-	if (ret)
-		goto err3;
-
-	return 0;
-
-err3:
-	platform_device_del(omap->usb2_phy);
-
-err2:
-	platform_device_put(omap->usb3_phy);
-
-err1:
-	platform_device_put(omap->usb2_phy);
-
-	return ret;
-}
-
 static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
 {
 	struct dwc3_omap	*omap = _omap;
@@ -358,12 +301,6 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	ret = dwc3_omap_register_phys(omap);
-	if (ret) {
-		dev_err(dev, "couldn't register PHYs\n");
-		return ret;
-	}
-
 	context = devm_kzalloc(dev, resource_size(res), GFP_KERNEL);
 	if (!context) {
 		dev_err(dev, "couldn't allocate dwc3 context memory\n");
@@ -447,10 +384,6 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 
 static int dwc3_omap_remove(struct platform_device *pdev)
 {
-	struct dwc3_omap	*omap = platform_get_drvdata(pdev);
-
-	platform_device_unregister(omap->usb2_phy);
-	platform_device_unregister(omap->usb3_phy);
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	device_for_each_child(&pdev->dev, NULL, dwc3_omap_remove_core);
-- 
1.7.9.5

[PATCH v3 09/11] usb: dwc3: core: add dt support for dwc3 core

[Kishon Vijay Abraham I]

Added dt support for dwc3 core and update the documentation with
device tree binding information. Getting a PHY is now done using
devm_usb_get_phy_by_phandle() for dt boot.

Signed-off-by: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
---
 Documentation/devicetree/bindings/usb/dwc3.txt |   22 ++++++++++++++++++++++
 drivers/usb/dwc3/core.c                        |   24 ++++++++++++++++++++----
 2 files changed, 42 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/dwc3.txt

diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
new file mode 100644
index 0000000..5e68eb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -0,0 +1,22 @@
+synopsys DWC3 CORE
+
+DWC3- USB3 CONTROLLER
+
+Required properties:
+ - compatible: must be "synopsys,dwc3"
+ - reg : Address and length of the register set for the device
+ - interrupts: Interrupts used by the dwc3 controller.
+ - usb_phy : array of phandle for the PHY device
+
+Optional properties:
+ - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
+
+This is usually a subnode to DWC3 glue to which it is connected.
+
+dwc3@4a030000 {
+	compatible = "synopsys,dwc3";
+	reg = <0x4a030000 0xcfff>;
+	interrupts = <0 92 4>
+	usb_phy = <&usb2_phy>, <&usb3,phy>;
+	tx-fifo-resize;
+};
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 3a4004a..c1fb6d2 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -420,13 +420,19 @@ static int dwc3_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+	if (node) {
+		dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb_phy", 0);
+		dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb_phy", 1);
+	} else {
+		dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+		dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
+	}
+
 	if (IS_ERR_OR_NULL(dwc->usb2_phy)) {
 		dev_err(dev, "no usb2 phy configured\n");
 		return -EPROBE_DEFER;
 	}
 
-	dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
 	if (IS_ERR_OR_NULL(dwc->usb3_phy)) {
 		dev_err(dev, "no usb3 phy configured\n");
 		return -EPROBE_DEFER;
@@ -450,8 +456,7 @@ static int dwc3_probe(struct platform_device *pdev)
 	else
 		dwc->maximum_speed = DWC3_DCFG_SUPERSPEED;
 
-	if (of_get_property(node, "tx-fifo-resize", NULL))
-		dwc->needs_fifo_resize = true;
+	dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize");
 
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
@@ -580,11 +585,22 @@ static int dwc3_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id of_dwc3_match[] = {
+	{
+		.compatible = "synopsys,dwc3"
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_dwc3_match);
+#endif
+
 static struct platform_driver dwc3_driver = {
 	.probe		= dwc3_probe,
 	.remove		= dwc3_remove,
 	.driver		= {
 		.name	= "dwc3",
+		.of_match_table	= of_match_ptr(of_dwc3_match),
 	},
 };
 
-- 
1.7.9.5

[PATCH v4 09/11] usb: dwc3: core: add dt support for dwc3 core

[Kishon Vijay Abraham I]

Added dt support for dwc3 core and update the documentation with
device tree binding information. Getting a PHY is now done using
devm_usb_get_phy_by_phandle() for dt boot.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 Documentation/devicetree/bindings/usb/dwc3.txt |   22 ++++++++++++++++++++++
 drivers/usb/dwc3/core.c                        |   24 ++++++++++++++++++++----
 2 files changed, 42 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/dwc3.txt

diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
new file mode 100644
index 0000000..5e68eb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -0,0 +1,22 @@
+synopsys DWC3 CORE
+
+DWC3- USB3 CONTROLLER
+
+Required properties:
+ - compatible: must be "synopsys,dwc3"
+ - reg : Address and length of the register set for the device
+ - interrupts: Interrupts used by the dwc3 controller.
+ - usb-phy : array of phandle for the PHY device
+
+Optional properties:
+ - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
+
+This is usually a subnode to DWC3 glue to which it is connected.
+
+dwc3@4a030000 {
+	compatible = "synopsys,dwc3";
+	reg = <0x4a030000 0xcfff>;
+	interrupts = <0 92 4>
+	usb-phy = <&usb2_phy>, <&usb3,phy>;
+	tx-fifo-resize;
+};
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 3a4004a..c1fb6d2 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -420,13 +420,19 @@ static int dwc3_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+	if (node) {
+		dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
+		dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1);
+	} else {
+		dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+		dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
+	}
+
 	if (IS_ERR_OR_NULL(dwc->usb2_phy)) {
 		dev_err(dev, "no usb2 phy configured\n");
 		return -EPROBE_DEFER;
 	}
 
-	dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
 	if (IS_ERR_OR_NULL(dwc->usb3_phy)) {
 		dev_err(dev, "no usb3 phy configured\n");
 		return -EPROBE_DEFER;
@@ -450,8 +456,7 @@ static int dwc3_probe(struct platform_device *pdev)
 	else
 		dwc->maximum_speed = DWC3_DCFG_SUPERSPEED;
 
-	if (of_get_property(node, "tx-fifo-resize", NULL))
-		dwc->needs_fifo_resize = true;
+	dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize");
 
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
@@ -580,11 +585,22 @@ static int dwc3_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id of_dwc3_match[] = {
+	{
+		.compatible = "synopsys,dwc3"
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_dwc3_match);
+#endif
+
 static struct platform_driver dwc3_driver = {
 	.probe		= dwc3_probe,
 	.remove		= dwc3_remove,
 	.driver		= {
 		.name	= "dwc3",
+		.of_match_table	= of_match_ptr(of_dwc3_match),
 	},
 };
 
-- 
1.7.9.5

[PATCH v3 07/11] usb: dwc3-omap: remove platform data associated with dwc3-omap

[Kishon Vijay Abraham I]

omap5 is not going to have support for non-dt boot making the platform
data associated with dwc3 useless. Removed it here.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/usb/dwc3/dwc3-omap.c            |   24 ++++++++++--------------
 include/linux/platform_data/dwc3-omap.h |    4 ----
 2 files changed, 10 insertions(+), 18 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index cc2ccba..4e96fbe 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -311,7 +311,6 @@ static int dwc3_omap_remove_core(struct device *dev, void *c)
 
 static int dwc3_omap_probe(struct platform_device *pdev)
 {
-	struct dwc3_omap_data	*pdata = pdev->dev.platform_data;
 	struct device_node	*node = pdev->dev.of_node;
 
 	struct dwc3_omap	*omap;
@@ -328,6 +327,11 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 	void __iomem		*base;
 	void			*context;
 
+	if (!node) {
+		dev_err(dev, "device node not found\n");
+		return -EINVAL;
+	}
+
 	omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
 	if (!omap) {
 		dev_err(dev, "not enough memory\n");
@@ -389,12 +393,7 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 
 	reg = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
 
-	if (node)
-		of_property_read_u32(node, "utmi-mode", &utmi_mode);
-	else if (pdata)
-		utmi_mode = pdata->utmi_mode;
-	else
-		dev_dbg(dev, "missing platform data\n");
+	of_property_read_u32(node, "utmi-mode", &utmi_mode);
 
 	switch (utmi_mode) {
 	case DWC3_OMAP_UTMI_MODE_SW:
@@ -437,13 +436,10 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 
 	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg);
 
-	if (node) {
-		ret = of_platform_populate(node, NULL, NULL, dev);
-		if (ret) {
-			dev_err(&pdev->dev,
-				"failed to add create dwc3 core\n");
-			return ret;
-		}
+	ret = of_platform_populate(node, NULL, NULL, dev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to create dwc3 core\n");
+		return ret;
 	}
 
 	return 0;
diff --git a/include/linux/platform_data/dwc3-omap.h b/include/linux/platform_data/dwc3-omap.h
index ada4012..1d36ca8 100644
--- a/include/linux/platform_data/dwc3-omap.h
+++ b/include/linux/platform_data/dwc3-omap.h
@@ -41,7 +41,3 @@ enum dwc3_omap_utmi_mode {
 	DWC3_OMAP_UTMI_MODE_HW,
 	DWC3_OMAP_UTMI_MODE_SW,
 };
-
-struct dwc3_omap_data {
-	enum dwc3_omap_utmi_mode	utmi_mode;
-};
-- 
1.7.9.5

[PATCH v3 10/11] usb: dwc3: core: enable the USB2 and USB3 phy in probe

[Kishon Vijay Abraham I]

Enabled the USB2 and USB3 PHY in probe by calling usb_phy_set_suspend
and disabled the PHYs on driver removal. When PM is implemented this
will be optimized to enable the PHYs only when needed.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/usb/dwc3/core.c |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index c1fb6d2..af189d5 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -438,6 +438,9 @@ static int dwc3_probe(struct platform_device *pdev)
 		return -EPROBE_DEFER;
 	}
 
+	usb_phy_set_suspend(dwc->usb2_phy, 0);
+	usb_phy_set_suspend(dwc->usb3_phy, 0);
+
 	spin_lock_init(&dwc->lock);
 	platform_set_drvdata(pdev, dwc);
 
@@ -559,6 +562,9 @@ static int dwc3_remove(struct platform_device *pdev)
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
+	usb_phy_set_suspend(dwc->usb2_phy, 1);
+	usb_phy_set_suspend(dwc->usb3_phy, 1);
+
 	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
-- 
1.7.9.5

[PATCH v3 11/11] usb: dwc3: core: stray statements are removed

[Kishon Vijay Abraham I]

No functional change. Stray statements where removed from dwc3 core.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/usb/dwc3/core.c |    3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index af189d5..ee1fa18 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -558,9 +558,6 @@ err0:
 static int dwc3_remove(struct platform_device *pdev)
 {
 	struct dwc3	*dwc = platform_get_drvdata(pdev);
-	struct resource	*res;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
 	usb_phy_set_suspend(dwc->usb2_phy, 1);
 	usb_phy_set_suspend(dwc->usb3_phy, 1);
-- 
1.7.9.5

Re: [PATCH v3 11/11] usb: dwc3: core: stray statements are removed

[Sergei Shtylyov]

Hello.

On 25-01-2013 7:00, Kishon Vijay Abraham I wrote:

> No functional change. Stray statements where removed from dwc3 core.

    s/where/are/

> Signed-off-by: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
> ---
>   drivers/usb/dwc3/core.c |    3 ---
>   1 file changed, 3 deletions(-)

WBR, Sergei