From: Tomi Valkeinen <tomi.valkeinen@ti.com>
To: Archit Taneja <archit@ti.com>,
linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Subject: [PATCH 04/20] OMAPDSS: DSI: remove omap_dss_device uses
Date: Fri, 8 Mar 2013 13:51:39 +0200 [thread overview]
Message-ID: <1362743515-10152-5-git-send-email-tomi.valkeinen@ti.com> (raw)
In-Reply-To: <1362743515-10152-1-git-send-email-tomi.valkeinen@ti.com>
The role of struct omap_dss_device will change in the future. The exact
details of that are still a bit unclear. However, the less uses of
omap_dss_device we have, the easier the change is in the future.
This patch removes uses of omap_dss_device from dsi.c, where it can be
done easily. Mostly this means passing dsi platform device to functions,
instead of the omap_dss_device.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dsi.c | 68 ++++++++++++++++++-----------------------
1 file changed, 29 insertions(+), 39 deletions(-)
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 9eb7845..815c930 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -1199,9 +1199,8 @@ static unsigned long dsi_fclk_rate(struct platform_device *dsidev)
return r;
}
-static int dsi_set_lp_clk_divisor(struct omap_dss_device *dssdev)
+static int dsi_set_lp_clk_divisor(struct platform_device *dsidev)
{
- struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
unsigned long dsi_fclk;
unsigned lp_clk_div;
@@ -3904,9 +3903,8 @@ static int dsi_compute_interleave_lp(int blank, int enter_hs, int exit_hs,
return max(lp_inter, 0);
}
-static void dsi_config_cmd_mode_interleaving(struct omap_dss_device *dssdev)
+static void dsi_config_cmd_mode_interleaving(struct platform_device *dsidev)
{
- struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
int blanking_mode;
int hfp_blanking_mode, hbp_blanking_mode, hsa_blanking_mode;
@@ -4022,9 +4020,8 @@ static void dsi_config_cmd_mode_interleaving(struct omap_dss_device *dssdev)
dsi_write_reg(dsidev, DSI_VM_TIMING6, r);
}
-static int dsi_proto_config(struct omap_dss_device *dssdev)
+static int dsi_proto_config(struct platform_device *dsidev)
{
- struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
u32 r;
int buswidth = 0;
@@ -4082,7 +4079,7 @@ static int dsi_proto_config(struct omap_dss_device *dssdev)
if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
dsi_config_vp_sync_events(dsidev);
dsi_config_blanking_modes(dsidev);
- dsi_config_cmd_mode_interleaving(dssdev);
+ dsi_config_cmd_mode_interleaving(dsidev);
}
dsi_vc_initial_config(dsidev, 0);
@@ -4343,7 +4340,7 @@ int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
- struct omap_overlay_manager *mgr = dssdev->output->manager;
+ struct omap_overlay_manager *mgr = dsi->output.manager;
int bpp = dsi_get_pixel_size(dsi->pix_fmt);
u8 data_type;
u16 word_count;
@@ -4401,7 +4398,7 @@ void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
- struct omap_overlay_manager *mgr = dssdev->output->manager;
+ struct omap_overlay_manager *mgr = dsi->output.manager;
if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
dsi_if_enable(dsidev, false);
@@ -4418,11 +4415,10 @@ void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel)
}
EXPORT_SYMBOL(dsi_disable_video_output);
-static void dsi_update_screen_dispc(struct omap_dss_device *dssdev)
+static void dsi_update_screen_dispc(struct platform_device *dsidev)
{
- struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
- struct omap_overlay_manager *mgr = dssdev->output->manager;
+ struct omap_overlay_manager *mgr = dsi->output.manager;
unsigned bytespp;
unsigned bytespl;
unsigned bytespf;
@@ -4578,7 +4574,7 @@ int omap_dsi_update(struct omap_dss_device *dssdev, int channel,
dsi->update_bytes = dw * dh *
dsi_get_pixel_size(dsi->pix_fmt) / 8;
#endif
- dsi_update_screen_dispc(dssdev);
+ dsi_update_screen_dispc(dsidev);
return 0;
}
@@ -4586,9 +4582,8 @@ EXPORT_SYMBOL(omap_dsi_update);
/* Display funcs */
-static int dsi_configure_dispc_clocks(struct omap_dss_device *dssdev)
+static int dsi_configure_dispc_clocks(struct platform_device *dsidev)
{
- struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
struct dispc_clock_info dispc_cinfo;
int r;
@@ -4610,11 +4605,10 @@ static int dsi_configure_dispc_clocks(struct omap_dss_device *dssdev)
return 0;
}
-static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
+static int dsi_display_init_dispc(struct platform_device *dsidev)
{
- struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
- struct omap_overlay_manager *mgr = dssdev->output->manager;
+ struct omap_overlay_manager *mgr = dsi->output.manager;
int r;
if (dsi->mode == OMAP_DSS_DSI_CMD_MODE) {
@@ -4652,7 +4646,7 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
dss_mgr_set_timings(mgr, &dsi->timings);
- r = dsi_configure_dispc_clocks(dssdev);
+ r = dsi_configure_dispc_clocks(dsidev);
if (r)
goto err1;
@@ -4672,20 +4666,18 @@ err:
return r;
}
-static void dsi_display_uninit_dispc(struct omap_dss_device *dssdev)
+static void dsi_display_uninit_dispc(struct platform_device *dsidev)
{
- struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
- struct omap_overlay_manager *mgr = dssdev->output->manager;
+ struct omap_overlay_manager *mgr = dsi->output.manager;
if (dsi->mode == OMAP_DSS_DSI_CMD_MODE)
dss_mgr_unregister_framedone_handler(mgr,
dsi_framedone_irq_callback, dsidev);
}
-static int dsi_configure_dsi_clocks(struct omap_dss_device *dssdev)
+static int dsi_configure_dsi_clocks(struct platform_device *dsidev)
{
- struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
struct dsi_clock_info cinfo;
int r;
@@ -4707,18 +4699,17 @@ static int dsi_configure_dsi_clocks(struct omap_dss_device *dssdev)
return 0;
}
-static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
+static int dsi_display_init_dsi(struct platform_device *dsidev)
{
- struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
- struct omap_overlay_manager *mgr = dssdev->output->manager;
+ struct omap_overlay_manager *mgr = dsi->output.manager;
int r;
r = dsi_pll_init(dsidev, true, true);
if (r)
goto err0;
- r = dsi_configure_dsi_clocks(dssdev);
+ r = dsi_configure_dsi_clocks(dsidev);
if (r)
goto err1;
@@ -4734,12 +4725,12 @@ static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
_dsi_print_reset_status(dsidev);
dsi_proto_timings(dsidev);
- dsi_set_lp_clk_divisor(dssdev);
+ dsi_set_lp_clk_divisor(dsidev);
if (1)
_dsi_print_reset_status(dsidev);
- r = dsi_proto_config(dssdev);
+ r = dsi_proto_config(dsidev);
if (r)
goto err3;
@@ -4764,12 +4755,11 @@ err0:
return r;
}
-static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev,
+static void dsi_display_uninit_dsi(struct platform_device *dsidev,
bool disconnect_lanes, bool enter_ulps)
{
- struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
- struct omap_overlay_manager *mgr = dssdev->output->manager;
+ struct omap_overlay_manager *mgr = dsi->output.manager;
if (enter_ulps && !dsi->ulps_enabled)
dsi_enter_ulps(dsidev);
@@ -4791,7 +4781,7 @@ int omapdss_dsi_display_enable(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
- struct omap_dss_output *out = dssdev->output;
+ struct omap_dss_output *out = &dsi->output;
int r = 0;
DSSDBG("dsi_display_enable\n");
@@ -4820,11 +4810,11 @@ int omapdss_dsi_display_enable(struct omap_dss_device *dssdev)
_dsi_initialize_irq(dsidev);
- r = dsi_display_init_dispc(dssdev);
+ r = dsi_display_init_dispc(dsidev);
if (r)
goto err_init_dispc;
- r = dsi_display_init_dsi(dssdev);
+ r = dsi_display_init_dsi(dsidev);
if (r)
goto err_init_dsi;
@@ -4833,7 +4823,7 @@ int omapdss_dsi_display_enable(struct omap_dss_device *dssdev)
return 0;
err_init_dsi:
- dsi_display_uninit_dispc(dssdev);
+ dsi_display_uninit_dispc(dsidev);
err_init_dispc:
dsi_enable_pll_clock(dsidev, 0);
dsi_runtime_put(dsidev);
@@ -4863,9 +4853,9 @@ void omapdss_dsi_display_disable(struct omap_dss_device *dssdev,
dsi_sync_vc(dsidev, 2);
dsi_sync_vc(dsidev, 3);
- dsi_display_uninit_dispc(dssdev);
+ dsi_display_uninit_dispc(dsidev);
- dsi_display_uninit_dsi(dssdev, disconnect_lanes, enter_ulps);
+ dsi_display_uninit_dsi(dsidev, disconnect_lanes, enter_ulps);
dsi_runtime_put(dsidev);
dsi_enable_pll_clock(dsidev, 0);
--
1.7.10.4
next prev parent reply other threads:[~2013-03-08 11:52 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-08 11:51 [PATCH 00/20] OMAPDSS: misc improvements Tomi Valkeinen
2013-03-08 11:51 ` [PATCH 01/20] OMAPDSS: DSI: remove DSI & DISPC clk divisors from dssdev Tomi Valkeinen
2013-03-08 11:51 ` [PATCH 02/20] OMAPDSS: HDMI: remove HDMI " Tomi Valkeinen
2013-03-08 11:51 ` [PATCH 03/20] OMAPDSS: DPI: remove omap_dss_device uses Tomi Valkeinen
2013-03-08 11:51 ` Tomi Valkeinen [this message]
2013-03-08 11:51 ` [PATCH 05/20] OMAPDSS: Taal: remove multi-panel support Tomi Valkeinen
2013-03-08 11:51 ` [PATCH 06/20] OMAPDSS: APPLY: remove dssdev from dss_mgr_wait_for_vsync Tomi Valkeinen
2013-03-08 11:51 ` [PATCH 07/20] OMAPDSS: add missing export for omap_dss_get_output() Tomi Valkeinen
2013-03-08 11:51 ` [PATCH 08/20] OMAPDSS: HDMI: init output earlier Tomi Valkeinen
2013-03-08 11:51 ` [PATCH 09/20] OMAPDSS: add output->name Tomi Valkeinen
2013-03-08 11:51 ` [PATCH 10/20] OMAPDSS: Resolve channels for outputs Tomi Valkeinen
2013-03-11 5:35 ` Archit Taneja
2013-03-11 11:02 ` Tomi Valkeinen
2013-03-11 12:05 ` Tomi Valkeinen
2013-03-11 12:19 ` Archit Taneja
2013-03-11 5:53 ` Archit Taneja
2013-03-11 11:54 ` Tomi Valkeinen
2013-03-11 12:01 ` Tomi Valkeinen
2013-03-08 11:51 ` [PATCH 11/20] OMAPDSS: add output->recommended_channel Tomi Valkeinen
2013-03-08 11:51 ` [PATCH 12/20] OMAPDSS: DPI: use output->recommended_channel Tomi Valkeinen
2013-03-08 11:51 ` [PATCH 13/20] OMAPFB: " Tomi Valkeinen
2013-03-08 11:51 ` [PATCH 14/20] OMAPDSS: remove dssdev->channel assignments Tomi Valkeinen
2013-03-11 6:24 ` Archit Taneja
2013-03-08 11:51 ` [PATCH 15/20] OMAP: dss-common.c: remove uses of dss channel (LATER) Tomi Valkeinen
2013-03-08 11:51 ` [PATCH 16/20] OMAPDSS: omapdss.h: remove channel field from omap_dss_device (LATER) Tomi Valkeinen
2013-03-08 11:51 ` [PATCH 17/20] OMAPDSS: add pdata->default_display_name Tomi Valkeinen
2013-03-08 11:51 ` [PATCH 18/20] OMAPDSS: DSI: delay dispc initialization Tomi Valkeinen
2013-03-11 6:05 ` Archit Taneja
2013-03-08 11:51 ` [PATCH 19/20] OMAPDSS: DSI: fix DSI channel source initialization Tomi Valkeinen
2013-03-11 6:10 ` Archit Taneja
2013-03-11 7:02 ` Tomi Valkeinen
2013-03-11 8:15 ` Archit Taneja
2013-03-11 8:25 ` Tomi Valkeinen
2013-03-08 11:51 ` [PATCH 20/20] OMAPDSS: Taal: remove rotate & mirror support Tomi Valkeinen
2013-03-11 6:21 ` Archit Taneja
2013-03-11 6:51 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362743515-10152-5-git-send-email-tomi.valkeinen@ti.com \
--to=tomi.valkeinen@ti.com \
--cc=archit@ti.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox