From: Florian Vaussard <florian.vaussard@epfl.ch>
To: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>,
Stephen Warren <swarren@wwwdotorg.org>,
Javier Martinez Canillas <javier.martinez@collabora.co.uk>,
Anil Kumar <anilk4.v@gmail.com>,
linux-omap@vger.kernel.org, devicetree-discuss@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org,
Florian Vaussard <florian.vaussard@epfl.ch>
Subject: [PATCH 3/3] ARM: dts: OMAP3: Use MTD constants for OMAP3 boards
Date: Tue, 11 Jun 2013 16:48:58 +0200 [thread overview]
Message-ID: <1370962138-9631-4-git-send-email-florian.vaussard@epfl.ch> (raw)
In-Reply-To: <1370962138-9631-1-git-send-email-florian.vaussard@epfl.ch>
Use the MTD constants for NAND and OneNAND nodes used in OMAP3
DTS.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
---
arch/arm/boot/dts/omap3-devkit8000.dts | 10 +++++-----
arch/arm/boot/dts/omap3-igep0020.dts | 10 +++++-----
arch/arm/boot/dts/omap3-igep0030.dts | 10 +++++-----
arch/arm/boot/dts/omap3430-sdp.dts | 28 ++++++++++++++--------------
4 files changed, 29 insertions(+), 29 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index 5be71b1..08699cb 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -143,27 +143,27 @@
x-loader@0 {
label = "X-Loader";
- reg = <0 0x80000>;
+ reg = <(0 * SZ_128K) (4 * SZ_128K)>;
};
bootloaders@80000 {
label = "U-Boot";
- reg = <0x80000 0x1e0000>;
+ reg = <(4 * SZ_128K) (15 * SZ_128K)>;
};
bootloaders_env@260000 {
label = "U-Boot Env";
- reg = <0x260000 0x20000>;
+ reg = <(19 * SZ_128K) (1 * SZ_128K)>;
};
kernel@280000 {
label = "Kernel";
- reg = <0x280000 0x400000>;
+ reg = <(20 * SZ_128K) (32 * SZ_128K)>;
};
filesystem@680000 {
label = "File System";
- reg = <0x680000 0xf980000>;
+ reg = <(52 * SZ_128K) MTDPART_SIZ_FULL>;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index e8c4828..3476b3c 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -97,23 +97,23 @@
partition@0 {
label = "SPL";
- reg = <0 0x100000>;
+ reg = <(0 * SZ_256K) (4 * SZ_256K)>;
};
partition@0x80000 {
label = "U-Boot";
- reg = <0x100000 0x180000>;
+ reg = <(4 * SZ_256K) (6 * SZ_256K)>;
};
partition@0x1c0000 {
label = "Environment";
- reg = <0x280000 0x100000>;
+ reg = <(10 * SZ_256K) (4 * SZ_256K)>;
};
partition@0x280000 {
label = "Kernel";
- reg = <0x380000 0x300000>;
+ reg = <(14 * SZ_256K) (12 * SZ_256K)>;
};
partition@0x780000 {
label = "Filesystem";
- reg = <0x680000 0x1f980000>;
+ reg = <(26 * SZ_256K) MTDPART_SIZ_FULL>;
};
};
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 644d053..e4f078c 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -72,23 +72,23 @@
partition@0 {
label = "SPL";
- reg = <0 0x100000>;
+ reg = <(0 * SZ_256K) (4 * SZ_256K)>;
};
partition@0x80000 {
label = "U-Boot";
- reg = <0x100000 0x180000>;
+ reg = <(4 * SZ_256K) (6 * SZ_256K)>;
};
partition@0x1c0000 {
label = "Environment";
- reg = <0x280000 0x100000>;
+ reg = <(10 * SZ_256K) (4 * SZ_256K)>;
};
partition@0x280000 {
label = "Kernel";
- reg = <0x380000 0x300000>;
+ reg = <(14 * SZ_256K) (12 * SZ_256K)>;
};
partition@0x780000 {
label = "Filesystem";
- reg = <0x680000 0x1f980000>;
+ reg = <(26 * SZ_256K) MTDPART_SIZ_FULL>;
};
};
};
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index 2a725a0..dd69ee0 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -81,19 +81,19 @@
partition@0 {
label = "bootloader-nor";
- reg = <0 0x40000>;
+ reg = <(0 * SZ_128K) (2 * SZ_128K)>;
};
partition@0x40000 {
label = "params-nor";
- reg = <0x40000 0x40000>;
+ reg = <(2 * SZ_128K) (2 * SZ_128K)>;
};
partition@0x80000 {
label = "kernel-nor";
- reg = <0x80000 0x200000>;
+ reg = <(4 * SZ_128K) (16 * SZ_128K)>;
};
partition@0x280000 {
label = "filesystem-nor";
- reg = <0x240000 0x7d80000>;
+ reg = <(18 * SZ_128K) (1004 * SZ_128K)>;
};
};
@@ -123,23 +123,23 @@
partition@0 {
label = "xloader-nand";
- reg = <0 0x80000>;
+ reg = <(0 * SZ_128K) (4 * SZ_128K)>;
};
partition@0x80000 {
label = "bootloader-nand";
- reg = <0x80000 0x140000>;
+ reg = <(4 * SZ_128K) (10 * SZ_128K)>;
};
partition@0x1c0000 {
label = "params-nand";
- reg = <0x1c0000 0xc0000>;
+ reg = <(14 * SZ_128K) (6 * SZ_128K)>;
};
partition@0x280000 {
label = "kernel-nand";
- reg = <0x280000 0x500000>;
+ reg = <(20 * SZ_128K) (40 * SZ_128K)>;
};
partition@0x780000 {
label = "filesystem-nand";
- reg = <0x780000 0x7880000>;
+ reg = <(60 * SZ_128K) (964 * SZ_128K)>;
};
};
@@ -168,23 +168,23 @@
partition@0 {
label = "xloader-onenand";
- reg = <0 0x80000>;
+ reg = <(0 * SZ_128K) (4 * SZ_128K)>;
};
partition@0x80000 {
label = "bootloader-onenand";
- reg = <0x80000 0x40000>;
+ reg = <(4 * SZ_128K) (2 * SZ_128K)>;
};
partition@0xc0000 {
label = "params-onenand";
- reg = <0xc0000 0x20000>;
+ reg = <(6 * SZ_128K) (1 * SZ_128K)>;
};
partition@0xe0000 {
label = "kernel-onenand";
- reg = <0xe0000 0x200000>;
+ reg = <(7 * SZ_128K) (16 * SZ_128K)>;
};
partition@0x2e0000 {
label = "filesystem-onenand";
- reg = <0x2e0000 0xfd20000>;
+ reg = <(23 * SZ_128K) (2025 * SZ_128K)>;
};
};
};
--
1.7.5.4
next prev parent reply other threads:[~2013-06-11 14:49 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-11 14:48 [PATCH 0/3] ARM: dts: OMAP3: Use constants with MTD devices Florian Vaussard
2013-06-11 14:48 ` [PATCH 1/3] ARM: dts: Add headers with constants for MTD partitions Florian Vaussard
2013-06-11 16:24 ` Stephen Warren
2013-06-11 17:28 ` Florian Vaussard
2013-06-12 13:05 ` Grant Likely
2013-06-19 9:19 ` Florian Vaussard
2013-06-11 14:48 ` [PATCH 2/3] ARM: dts: Add omap3-overo NAND flash memory binding Florian Vaussard
2013-06-11 14:48 ` Florian Vaussard [this message]
2013-06-11 15:29 ` [PATCH 3/3] ARM: dts: OMAP3: Use MTD constants for OMAP3 boards Javier Martinez Canillas
2013-06-11 17:30 ` Florian Vaussard
2013-06-12 13:11 ` Grant Likely
2013-06-11 16:27 ` Stephen Warren
2013-06-11 17:31 ` Florian Vaussard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370962138-9631-4-git-send-email-florian.vaussard@epfl.ch \
--to=florian.vaussard@epfl.ch \
--cc=anilk4.v@gmail.com \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=javier.martinez@collabora.co.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=swarren@wwwdotorg.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).