[PATCH 4/4] ARM: OMAP2+: dts: HACK: Provide alias to USB PHY clock

[Roger Quadros <rogerq@ti.com>]

Till the OMAP clocks are correctly defined in device tree, use
this temporary hack to provide clock alias to the USB PHY clocks.

Without this, USB Host & Ethernet will not be functional with
device tree boots on Panda and uEVM.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 arch/arm/mach-omap2/board-generic.c |   23 ++++++++++++++++++++++-
 1 files changed, 22 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 88aa6b1..2b2d0de 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -15,6 +15,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
+#include <linux/clk.h>
 
 #include <asm/mach/arch.h>
 
@@ -35,6 +36,21 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
 	{ }
 };
 
+/*
+ * HACK: create alias for USB host PHY clock.
+ * Remove this when clock phandle can be provided via DT
+ */
+static void __init legacy_init_ehci_clk(char *clkname)
+{
+	int ret;
+
+	ret = clk_add_alias("main_clk", NULL, clkname, NULL);
+	if (ret) {
+		pr_err("%s:Failed to add main_clk alias to %s :%d\n",
+						__func__, clkname, ret);
+	}
+}
+
 static void __init omap_generic_init(void)
 {
 	omap_sdrc_init(NULL, NULL);
@@ -45,10 +61,15 @@ static void __init omap_generic_init(void)
 	 * HACK: call display setup code for selected boards to enable omapdss.
 	 * This will be removed when omapdss supports DT.
 	 */
-	if (of_machine_is_compatible("ti,omap4-panda"))
+	if (of_machine_is_compatible("ti,omap4-panda")) {
 		omap4_panda_display_init_of();
+		legacy_init_ehci_clk("auxclk3_ck");
+
+	}
 	else if (of_machine_is_compatible("ti,omap4-sdp"))
 		omap_4430sdp_display_init_of();
+	else if (of_machine_is_compatible("ti,omap5-uevm"))
+		legacy_init_ehci_clk("auxclk1_ck");
 }
 
 #ifdef CONFIG_SOC_OMAP2420
-- 
1.7.4.1