From mboxrd@z Thu Jan 1 00:00:00 1970 From: Subject: [PATCH] mmc: omap_hsmmc: use for OMAP5 as well Date: Fri, 28 Jun 2013 18:04:54 +0530 Message-ID: <1372422894-23729-1-git-send-email-a-bindra@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: linux-mmc-owner@vger.kernel.org To: linux-mmc@vger.kernel.org, cjb@laptop.org Cc: linux-omap@vger.kernel.org, Balaji T K , balbi@ti.com, nm@ti.com, Amarinder Bindra List-Id: linux-omap@vger.kernel.org From: Amarinder Bindra OMAP's hs_mmc driver is also used for OMAP5 MMC controller operation. Considering that the device tree entries are already there for this, allow the driver to be built when only OMAP5 is enabled. This allows MMC root filesystems to be available in "OMAP5 only" configurations. Signed-off-by: Amarinder Bindra Acked-by: Felipe Balbi Acked-by: Nishanth Menon --- drivers/mmc/host/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 009dabd..6722e21 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -254,11 +254,11 @@ config MMC_OMAP config MMC_OMAP_HS tristate "TI OMAP High Speed Multimedia Card Interface support" - depends on SOC_OMAP2430 || ARCH_OMAP3 || ARCH_OMAP4 + depends on SOC_OMAP2430 || ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 help This selects the TI OMAP High Speed Multimedia card Interface. - If you have an OMAP2430 or OMAP3 board or OMAP4 board with a - Multimedia Card slot, say Y or M here. + If you have an OMAP2430 or OMAP3 board or OMAP4 board or OMAP5 + board with a Multimedia Card slot, say Y or M here. If unsure, say N. -- 1.7.9.5