From mboxrd@z Thu Jan 1 00:00:00 1970 From: George Cherian Subject: [PATCH 4/5] arm: dts: Add USB phy nodes for AM33XX Date: Mon, 8 Jul 2013 16:13:20 +0530 Message-ID: <1373280201-31785-5-git-send-email-george.cherian@ti.com> References: <1373280201-31785-1-git-send-email-george.cherian@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1373280201-31785-1-git-send-email-george.cherian@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: linux-usb@vger.kernel.org Cc: balbi@ti.com, linux-kernel@vger.kernel.org, gregkh@linuxfoundation.org, linux-omap@vger.kernel.org, kishon@ti.com, bigeasy@linutronix.de, George Cherian List-Id: linux-omap@vger.kernel.org Add DT bindings of phy nodes for AM33XX platform. Signed-off-by: George Cherian --- arch/arm/boot/dts/am33xx.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 8e1248f..4f3cca0 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -326,6 +326,25 @@ status = "disabled"; }; + phy1: usbphy-gs70@44e10620 { + compatible = "ti,am335x-usb2"; + #phy-cells = <0>; + id = <0>; + }; + + phy2: usbphy-gs71@44e10628 { + compatible = "ti,am335x-usb2"; + #phy-cells = <0>; + id = <1>; + }; + + omap_control_usb: omap-control-usb@44e10620 { + compatible = "ti,omap-control-usb"; + reg = <0x44e10620 0x10>; + reg-names = "control_dev_conf"; + ti,type = <3>; + }; + usb@47400000 { compatible = "ti,musb-am33xx"; reg = <0x47400000 0x1000 /* usbss */ @@ -341,6 +360,9 @@ port1-mode = <3>; power = <250>; ti,hwmods = "usb_otg_hs"; + phy-names = "am335x-usb0", "am335x-usb1"; + phys = <&phy1>, <&phy2>; + }; mac: ethernet@4a100000 { -- 1.8.1.4