linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: George Cherian <george.cherian@ti.com>
To: linux-usb@vger.kernel.org
Cc: balbi@ti.com, linux-kernel@vger.kernel.org,
	gregkh@linuxfoundation.org, linux-omap@vger.kernel.org,
	kishon@ti.com, bigeasy@linutronix.de,
	George Cherian <george.cherian@ti.com>
Subject: [PATCH 5/5] usb: musb: dsps: Remove the phy control from glue and add phy driver APIs
Date: Mon, 8 Jul 2013 16:13:21 +0530	[thread overview]
Message-ID: <1373280201-31785-6-git-send-email-george.cherian@ti.com> (raw)
In-Reply-To: <1373280201-31785-1-git-send-email-george.cherian@ti.com>

Remove usb phy control module access from platform glue.
The same is now done using amxxxx phy driver and phy-omap-control.

Signed-off-by: George Cherian <george.cherian@ti.com>
---
 drivers/usb/musb/musb_dsps.c | 105 +++++++++++++++----------------------------
 1 file changed, 36 insertions(+), 69 deletions(-)

diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 41f135a..8f4e04a 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -123,49 +123,11 @@ struct dsps_glue {
 	const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */
 	struct timer_list timer[2];	/* otg_workaround timer */
 	unsigned long last_timer[2];    /* last timer data for each instance */
-	u32 __iomem *usb_ctrl[2];
 };
 
-#define	DSPS_AM33XX_CONTROL_MODULE_PHYS_0	0x44e10620
-#define	DSPS_AM33XX_CONTROL_MODULE_PHYS_1	0x44e10628
+#define glue_to_musb(g, i)		platform_get_drvdata(g->musb[i])
 
-static const resource_size_t dsps_control_module_phys[] = {
-	DSPS_AM33XX_CONTROL_MODULE_PHYS_0,
-	DSPS_AM33XX_CONTROL_MODULE_PHYS_1,
-};
-
-#define USBPHY_CM_PWRDN		(1 << 0)
-#define USBPHY_OTG_PWRDN	(1 << 1)
-#define USBPHY_OTGVDET_EN	(1 << 19)
-#define USBPHY_OTGSESSEND_EN	(1 << 20)
-
-/**
- * musb_dsps_phy_control - phy on/off
- * @glue: struct dsps_glue *
- * @id: musb instance
- * @on: flag for phy to be switched on or off
- *
- * This is to enable the PHY using usb_ctrl register in system control
- * module space.
- *
- * XXX: This function will be removed once we have a seperate driver for
- * control module
- */
-static void musb_dsps_phy_control(struct dsps_glue *glue, u8 id, u8 on)
-{
-	u32 usbphycfg;
 
-	usbphycfg = readl(glue->usb_ctrl[id]);
-
-	if (on) {
-		usbphycfg &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN);
-		usbphycfg |= USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN;
-	} else {
-		usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN;
-	}
-
-	writel(usbphycfg, glue->usb_ctrl[id]);
-}
 /**
  * dsps_musb_enable - enable interrupts
  */
@@ -411,16 +373,31 @@ static int dsps_musb_init(struct musb *musb)
 	void __iomem *reg_base = musb->ctrl_base;
 	u32 rev, val;
 	int status;
+	char phyname[12];
 
 	/* mentor core register starts at offset of 0x400 from musb base */
 	musb->mregs += wrp->musb_core_offset;
 
-	/* NOP driver needs change if supporting dual instance */
-	usb_nop_xceiv_register();
-	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (dev->parent->of_node) {
+		snprintf(phyname , 12, "am335x-usb%d", pdev->id);
+		musb->phy = devm_phy_get(dev->parent, phyname);
+		musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent,
+							"phys", pdev->id);
+	} else {
+		snprintf(phyname , 12, "am335x-usb%d", pdev->id);
+		musb->phy = devm_phy_get(dev, musb->phy_label);
+		musb->xceiv = devm_usb_get_phy_dev(dev, pdev->id);
+	}
+
 	if (IS_ERR_OR_NULL(musb->xceiv))
 		return -EPROBE_DEFER;
 
+	if (IS_ERR_OR_NULL(musb->phy)) {
+		pr_err("no PHY configured\n");
+		return -EPROBE_DEFER;
+	}
+
+
 	/* Returns zero if e.g. not clocked */
 	rev = dsps_readl(reg_base, wrp->revision);
 	if (!rev) {
@@ -434,7 +411,8 @@ static int dsps_musb_init(struct musb *musb)
 	dsps_writel(reg_base, wrp->control, (1 << wrp->reset));
 
 	/* Start the on-chip PHY and its PLL. */
-	musb_dsps_phy_control(glue, pdev->id, 1);
+	phy_init(musb->phy);
+	phy_power_on(musb->phy);
 
 	musb->isr = dsps_interrupt;
 
@@ -448,8 +426,7 @@ static int dsps_musb_init(struct musb *musb)
 
 	return 0;
 err0:
-	usb_put_phy(musb->xceiv);
-	usb_nop_xceiv_unregister();
+	devm_phy_put(dev->parent, musb->phy);
 	return status;
 }
 
@@ -462,11 +439,8 @@ static int dsps_musb_exit(struct musb *musb)
 	del_timer_sync(&glue->timer[pdev->id]);
 
 	/* Shutdown the on-chip PHY and its PLL. */
-	musb_dsps_phy_control(glue, pdev->id, 0);
-
-	/* NOP driver needs change if supporting dual instance */
-	usb_put_phy(musb->xceiv);
-	usb_nop_xceiv_unregister();
+	phy_power_off(musb->phy);
+	phy_exit(musb->phy);
 
 	return 0;
 }
@@ -496,16 +470,6 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
 	char res_name[11];
 	int ret;
 
-	resources[0].start = dsps_control_module_phys[id];
-	resources[0].end = resources[0].start + SZ_4 - 1;
-	resources[0].flags = IORESOURCE_MEM;
-
-	glue->usb_ctrl[id] = devm_ioremap_resource(&pdev->dev, resources);
-	if (IS_ERR(glue->usb_ctrl[id])) {
-		ret = PTR_ERR(glue->usb_ctrl[id]);
-		goto err0;
-	}
-
 	/* first resource is for usbss, so start index from 1 */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, id + 1);
 	if (!res) {
@@ -692,26 +656,29 @@ static int dsps_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM_SLEEP
 static int dsps_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev->parent);
-	struct dsps_glue *glue = platform_get_drvdata(pdev);
+	struct dsps_glue *glue = dev_get_drvdata(dev);
 	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	struct musb			*musb;
 	int i;
 
-	for (i = 0; i < wrp->instances; i++)
-		musb_dsps_phy_control(glue, i, 0);
-
+	for (i = 0; i < wrp->instances; i++) {
+		musb = glue_to_musb(glue, i);
+		phy_power_off(musb->phy);
+	}
 	return 0;
 }
 
 static int dsps_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev->parent);
-	struct dsps_glue *glue = platform_get_drvdata(pdev);
+	struct dsps_glue *glue = dev_get_drvdata(dev);
 	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	struct musb			*musb;
 	int i;
 
-	for (i = 0; i < wrp->instances; i++)
-		musb_dsps_phy_control(glue, i, 1);
+	for (i = 0; i < wrp->instances; i++) {
+		musb = glue_to_musb(glue, i);
+		phy_power_on(musb->phy);
+	}
 
 	return 0;
 }
-- 
1.8.1.4

  parent reply	other threads:[~2013-07-08 10:43 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-08 10:43 [PATCH 0/5] Add phy support for AM335X platform using Generic PHy framework George Cherian
2013-07-08 10:43 ` [PATCH 1/5] usb: musb: dsps: enable dual instance support for am33xx platform George Cherian
2013-07-08 10:43 ` [PATCH 2/5] usb: phy: phy-omap-control: Add API to power on/off USB PHY for AM335X George Cherian
2013-07-08 11:37   ` Kishon Vijay Abraham I
2013-07-08 10:43 ` [PATCH 3/5] phy: phy-amxxxx-usb: Add PHY driver for amxxxx platform George Cherian
2013-07-08 11:52   ` Kishon Vijay Abraham I
2013-07-08 10:43 ` [PATCH 4/5] arm: dts: Add USB phy nodes for AM33XX George Cherian
2013-07-08 11:54   ` Kishon Vijay Abraham I
2013-07-08 10:43 ` George Cherian [this message]
2013-07-08 12:08   ` [PATCH 5/5] usb: musb: dsps: Remove the phy control from glue and add phy driver APIs Kishon Vijay Abraham I
2013-07-08 19:44 ` [PATCH 0/5] Add phy support for AM335X platform using Generic PHy framework Sebastian Andrzej Siewior
     [not found]   ` <51DB16A1.6010006-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
2013-07-08 20:34     ` Ezequiel Garcia
2013-07-09  7:13       ` Sebastian Andrzej Siewior
2013-07-09  5:40   ` George Cherian
2013-07-09 11:35     ` Kishon Vijay Abraham I
     [not found]       ` <51DBF59F.1030109-l0cyMroinI0@public.gmane.org>
2013-07-10  4:56         ` George Cherian
2013-07-10  5:23           ` Felipe Balbi
2013-07-10  5:43             ` George Cherian

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1373280201-31785-6-git-send-email-george.cherian@ti.com \
    --to=george.cherian@ti.com \
    --cc=balbi@ti.com \
    --cc=bigeasy@linutronix.de \
    --cc=gregkh@linuxfoundation.org \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).