From: Rajendra Nayak <rnayak@ti.com>
To: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: tony@atomide.com, paul@pwsan.com, khilman@linaro.org,
benoit.cousson@gmail.com, r.sricharan@ti.com, ambresh@ti.com,
sourav.poddar@ti.com, santosh.shilimkar@ti.com, nm@ti.com,
balbi@ti.com, Rajendra Nayak <rnayak@ti.com>
Subject: [PATCH v3 9/9] ARM: DRA7: Add the build support in omap2plus
Date: Sun, 4 Aug 2013 21:57:37 +0530 [thread overview]
Message-ID: <1375633657-6835-10-git-send-email-rnayak@ti.com> (raw)
In-Reply-To: <1375633657-6835-1-git-send-email-rnayak@ti.com>
From: R Sricharan <r.sricharan@ti.com>
Now that the needed pieces for DRA7 based SoCs' is present, enable
the build support in omap2plus_defconfig
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
---
arch/arm/configs/omap2plus_defconfig | 1 +
arch/arm/mach-omap2/Kconfig | 10 +++++++++-
arch/arm/plat-omap/Kconfig | 2 +-
3 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 5339e6a..1da7cf9 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -306,3 +306,4 @@ CONFIG_TI_DAVINCI_MDIO=y
CONFIG_TI_DAVINCI_CPDMA=y
CONFIG_TI_CPSW=y
CONFIG_AT803X_PHY=y
+CONFIG_SOC_DRA7XX=y
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index fc6ec23..740f41b 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -118,7 +118,7 @@ config ARCH_OMAP2PLUS_TYPICAL
select I2C
select I2C_OMAP
select MENELAUS if ARCH_OMAP2
- select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
+ select NEON if CPU_V7
select PM_RUNTIME
select REGULATOR
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
@@ -135,6 +135,14 @@ config SOC_HAS_REALTIME_COUNTER
depends on SOC_OMAP5 || SOC_DRA7XX
default y
+config SOC_DRA7XX
+ bool "TI DRA7XX"
+ select ARM_ARCH_TIMER
+ select CPU_V7
+ select ARM_GIC
+ select HAVE_SMP
+ select COMMON_CLK
+
comment "OMAP Core Type"
depends on ARCH_OMAP2
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index f82bae2..436ea97 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -106,7 +106,7 @@ config OMAP_32K_TIMER
This timer saves power compared to the OMAP_MPU_TIMER, and has
support for no tick during idle. The 32KHz timer provides less
intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
- currently only available for OMAP16XX, 24XX, 34XX and OMAP4/5.
+ currently only available for OMAP16XX, 24XX, 34XX, OMAP4/5 and DRA7XX.
On OMAP2PLUS this value is only used for CONFIG_HZ and
CLOCK_TICK_RATE compile time calculation.
--
1.7.9.5
next prev parent reply other threads:[~2013-08-04 16:29 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-04 16:27 [PATCH v3 0/9] DRA7xx core support Rajendra Nayak
2013-08-04 16:27 ` [PATCH v3 1/9] ARM: DRA7: Reuse all of PRCM and MPUSS SMP infra Rajendra Nayak
2013-08-04 16:27 ` [PATCH v3 2/9] ARM: DRA7: Reuse io tables and add a new .init_early Rajendra Nayak
2013-08-04 16:27 ` [PATCH v3 3/9] ARM: DRA7: Resue the clocksource, clockevent support Rajendra Nayak
2013-08-04 16:27 ` [PATCH v3 4/9] ARM: DRA7: board-generic: Add basic DT support Rajendra Nayak
2013-08-04 16:27 ` [PATCH v3 5/9] ARM: DRA7: Kconfig: Make ARCH_NR_GPIO default to 512 Rajendra Nayak
2013-08-04 16:27 ` [PATCH v3 6/9] ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board Rajendra Nayak
2013-08-04 16:27 ` [PATCH v3 7/9] ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs' Rajendra Nayak
2013-08-05 11:44 ` Grygorii Strashko
2013-08-06 8:11 ` Rajendra Nayak
2013-08-06 11:59 ` Grygorii Strashko
2013-08-04 16:27 ` [PATCH v3 8/9] ARM: DRA7: hwmod: Reuse the soc_ops used for OMAP4/5 Rajendra Nayak
2013-08-04 16:27 ` Rajendra Nayak [this message]
2013-08-12 6:40 ` [PATCH v3 0/9] DRA7xx core support Rajendra Nayak
2013-08-12 8:24 ` Tony Lindgren
2013-08-12 8:27 ` Rajendra Nayak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1375633657-6835-10-git-send-email-rnayak@ti.com \
--to=rnayak@ti.com \
--cc=ambresh@ti.com \
--cc=balbi@ti.com \
--cc=benoit.cousson@gmail.com \
--cc=khilman@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=paul@pwsan.com \
--cc=r.sricharan@ti.com \
--cc=santosh.shilimkar@ti.com \
--cc=sourav.poddar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).