From mboxrd@z Thu Jan 1 00:00:00 1970 From: Roger Quadros Subject: [PATCH v2 6/9] ARM: dts: omap4-panda: Use reset-gpios for hsusb1_reset Date: Thu, 15 Aug 2013 13:18:26 +0300 Message-ID: <1376561909-4406-7-git-send-email-rogerq@ti.com> References: <1376561909-4406-1-git-send-email-rogerq@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1376561909-4406-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org> Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: balbi-l0cyMroinI0@public.gmane.org, tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org, bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org Cc: p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Roger Quadros List-Id: linux-omap@vger.kernel.org We no longer need to model the RESET line as a regulator since the USB phy-nop driver accepts "reset-gpios" property. Signed-off-by: Roger Quadros --- arch/arm/boot/dts/omap4-panda-common.dtsi | 18 +----------------- 1 files changed, 1 insertions(+), 17 deletions(-) diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index faa95b5..c60ebd0 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -60,22 +60,6 @@ "AFMR", "Line In"; }; - /* - * Temp hack: Need to be replaced with the proper gpio-controlled - * reset driver as soon it will be merged. - * http://thread.gmane.org/gmane.linux.drivers.devicetree/36830 - */ - /* HS USB Port 1 RESET */ - hsusb1_reset: hsusb1_reset_reg { - compatible = "regulator-fixed"; - regulator-name = "hsusb1_reset"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 30 0>; /* gpio_62 */ - startup-delay-us = <70000>; - enable-active-high; - };