* [PATCHv3 0/2] ARM: dts: Add initial support for IGEP AQUILA
@ 2013-09-10 14:55 Enric Balletbo i Serra
2013-09-10 14:55 ` [PATCH 1/2] ARM: dts: AM33XX: Add support for IGEP COM AQUILA Enric Balletbo i Serra
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Enric Balletbo i Serra @ 2013-09-10 14:55 UTC (permalink / raw)
To: linux-omap, Benoit Cousson, Tony Lindgren,
Javier Martinez Canillas
Cc: Enric Balletbo i Serra
From: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Hi all,
These two patches introduces initial support for the IGEP AM335x-based
platforms. The first patch add support for IGEP COM AQUILA products, and the
second patch add support for the development board.
These patches apply on top of bcousson/for_3.12/dts repository.
Changes since v2:
* Make it compatible with "isee,am335x-base0033", "isee,am335x-igep0033",
"ti,am33xx" since these boards are manufactured by ISEE not TI. (Javier)
Changes since v1:
* Use &node to reference the nodes already defined in dtsi files. (Javier)
Best regards,
Enric Balletbo i Serra (2):
ARM: dts: AM33XX: Add support for IGEP COM AQUILA
ARM: dts: AM33XX: Add support for IGEP AQUILA EXPANSION board.
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/am335x-base0033.dts | 16 ++
arch/arm/boot/dts/am335x-igep0033.dtsi | 265 +++++++++++++++++++++++++++++++++
3 files changed, 282 insertions(+)
create mode 100644 arch/arm/boot/dts/am335x-base0033.dts
create mode 100644 arch/arm/boot/dts/am335x-igep0033.dtsi
--
1.8.1.2
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH 1/2] ARM: dts: AM33XX: Add support for IGEP COM AQUILA 2013-09-10 14:55 [PATCHv3 0/2] ARM: dts: Add initial support for IGEP AQUILA Enric Balletbo i Serra @ 2013-09-10 14:55 ` Enric Balletbo i Serra 2013-09-10 14:55 ` [PATCH 2/2] ARM: dts: AM33XX: Add support for IGEP AQUILA EXPANSION board Enric Balletbo i Serra 2013-09-25 13:10 ` [PATCHv3 0/2] ARM: dts: Add initial support for IGEP AQUILA Javier Martinez Canillas 2 siblings, 0 replies; 8+ messages in thread From: Enric Balletbo i Serra @ 2013-09-10 14:55 UTC (permalink / raw) To: linux-omap, Benoit Cousson, Tony Lindgren, Javier Martinez Canillas Cc: Enric Balletbo i Serra, Enric Balletbo i Serra The IGEP COM AQUILA is industrial processors SODIMM module with following highlights: o AM3352/AM3354/AM3358/AM3359 Texas Instruments processor o Cortex-A8 ARM CPU o 3.3 volts Inputs / Outputs use industrial o 256 MB DDR3 SDRAM / 128 Megabytes FLASH o MicroSD card reader on-board o Ethernet controller on-board o JTAG debug connector available o Designed for industrial range purposes Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> --- arch/arm/boot/dts/am335x-igep0033.dtsi | 265 +++++++++++++++++++++++++++++++++ 1 file changed, 265 insertions(+) create mode 100644 arch/arm/boot/dts/am335x-igep0033.dtsi diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi new file mode 100644 index 0000000..06eba07 --- /dev/null +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -0,0 +1,265 @@ +/* + * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x + * + * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "am33xx.dtsi" + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; + + compatible = "gpio-leds"; + + led@0 { + label = "com:green:user"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; +}; + +&am33xx_pinmux { + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + nandflash_pins: pinmux_nandflash_pins { + pinctrl-single,pins = < + 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + leds_pins: pinmux_leds_pins { + pinctrl-single,pins = < + 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + >; + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins>; + + ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ + + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <8>; + ti,nand-ecc-opt = "bch8"; + gpmc,device-nand = "true"; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wait-on-read = "true"; + gpmc,wait-on-write = "true"; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + elm_id = <&elm>; + + /* MTD partition table */ + partition@0 { + label = "SPL"; + reg = <0x00000000 0x000080000>; + }; + + partition@1 { + label = "U-boot"; + reg = <0x00080000 0x001e0000>; + }; + + partition@2 { + label = "U-Boot Env"; + reg = <0x00260000 0x00020000>; + }; + + partition@3 { + label = "Kernel"; + reg = <0x00280000 0x00500000>; + }; + + partition@4 { + label = "File System"; + reg = <0x00780000 0x007880000>; + }; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; +}; + +&uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; +}; + +#include "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-always-on; + }; + }; +}; + -- 1.8.1.2 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/2] ARM: dts: AM33XX: Add support for IGEP AQUILA EXPANSION board. 2013-09-10 14:55 [PATCHv3 0/2] ARM: dts: Add initial support for IGEP AQUILA Enric Balletbo i Serra 2013-09-10 14:55 ` [PATCH 1/2] ARM: dts: AM33XX: Add support for IGEP COM AQUILA Enric Balletbo i Serra @ 2013-09-10 14:55 ` Enric Balletbo i Serra 2013-09-25 13:10 ` [PATCHv3 0/2] ARM: dts: Add initial support for IGEP AQUILA Javier Martinez Canillas 2 siblings, 0 replies; 8+ messages in thread From: Enric Balletbo i Serra @ 2013-09-10 14:55 UTC (permalink / raw) To: linux-omap, Benoit Cousson, Tony Lindgren, Javier Martinez Canillas Cc: Enric Balletbo i Serra, Enric Balletbo i Serra The IGEP AQUILA EXPANSION board is a development platform for the IGEP COM AQUILA AM335x boards. The board adds the following connectivity: o USB OTG o USB HOST o HDMI o Ethernet o Serial Debug (3.3V) o 2x46 pin headers o EEPROM Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/am335x-base0033.dts | 16 ++++++++++++++++ 2 files changed, 17 insertions(+) create mode 100644 arch/arm/boot/dts/am335x-base0033.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 641b3c9..12c2949 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -171,6 +171,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ am335x-bone.dtb \ + am335x-base0033.dtb \ am3517-evm.dtb \ am3517_mt_ventoux.dtb \ am43x-epos-evm.dtb diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts new file mode 100644 index 0000000..7a079db --- /dev/null +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -0,0 +1,16 @@ +/* + * am335x-base0033.dtsi - Device Tree file for IGEP AQUILA EXPANSION + * + * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "am335x-igep0033.dtsi" + +/ { + model = "IGEP COM AM335x on AQUILA Expansion"; + compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx"; +}; -- 1.8.1.2 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCHv3 0/2] ARM: dts: Add initial support for IGEP AQUILA 2013-09-10 14:55 [PATCHv3 0/2] ARM: dts: Add initial support for IGEP AQUILA Enric Balletbo i Serra 2013-09-10 14:55 ` [PATCH 1/2] ARM: dts: AM33XX: Add support for IGEP COM AQUILA Enric Balletbo i Serra 2013-09-10 14:55 ` [PATCH 2/2] ARM: dts: AM33XX: Add support for IGEP AQUILA EXPANSION board Enric Balletbo i Serra @ 2013-09-25 13:10 ` Javier Martinez Canillas 2013-10-03 18:17 ` Tony Lindgren 2 siblings, 1 reply; 8+ messages in thread From: Javier Martinez Canillas @ 2013-09-25 13:10 UTC (permalink / raw) To: Enric Balletbo i Serra Cc: linux-omap@vger.kernel.org, Benoit Cousson, Tony Lindgren, Enric Balletbo i Serra On Tue, Sep 10, 2013 at 4:55 PM, Enric Balletbo i Serra <eballetbo@gmail.com> wrote: > From: Enric Balletbo i Serra <eballetbo@iseebcn.com> > > Hi all, > > These two patches introduces initial support for the IGEP AM335x-based > platforms. The first patch add support for IGEP COM AQUILA products, and the > second patch add support for the development board. > > These patches apply on top of bcousson/for_3.12/dts repository. > > Changes since v2: > * Make it compatible with "isee,am335x-base0033", "isee,am335x-igep0033", > "ti,am33xx" since these boards are manufactured by ISEE not TI. (Javier) > Changes since v1: > * Use &node to reference the nodes already defined in dtsi files. (Javier) > > Best regards, > > Enric Balletbo i Serra (2): > ARM: dts: AM33XX: Add support for IGEP COM AQUILA > ARM: dts: AM33XX: Add support for IGEP AQUILA EXPANSION board. > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/am335x-base0033.dts | 16 ++ > arch/arm/boot/dts/am335x-igep0033.dtsi | 265 +++++++++++++++++++++++++++++++++ > 3 files changed, 282 insertions(+) > create mode 100644 arch/arm/boot/dts/am335x-base0033.dts > create mode 100644 arch/arm/boot/dts/am335x-igep0033.dtsi > > -- > 1.8.1.2 > Hi Benoit and Tony, Any comments on this series? I had already reviewed previous versions of the DT and it looks good to me now. It would be great if this can make it for 3.13. Thanks a lot and best regards, Javier ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCHv3 0/2] ARM: dts: Add initial support for IGEP AQUILA 2013-09-25 13:10 ` [PATCHv3 0/2] ARM: dts: Add initial support for IGEP AQUILA Javier Martinez Canillas @ 2013-10-03 18:17 ` Tony Lindgren 2013-10-04 12:41 ` Benoit Cousson 0 siblings, 1 reply; 8+ messages in thread From: Tony Lindgren @ 2013-10-03 18:17 UTC (permalink / raw) To: Javier Martinez Canillas Cc: Enric Balletbo i Serra, linux-omap@vger.kernel.org, Benoit Cousson, Enric Balletbo i Serra * Javier Martinez Canillas <martinez.javier@gmail.com> [130925 06:18]: > On Tue, Sep 10, 2013 at 4:55 PM, Enric Balletbo i Serra > <eballetbo@gmail.com> wrote: > > From: Enric Balletbo i Serra <eballetbo@iseebcn.com> > > > > Hi all, > > > > These two patches introduces initial support for the IGEP AM335x-based > > platforms. The first patch add support for IGEP COM AQUILA products, and the > > second patch add support for the development board. > > > > These patches apply on top of bcousson/for_3.12/dts repository. > > > > Changes since v2: > > * Make it compatible with "isee,am335x-base0033", "isee,am335x-igep0033", > > "ti,am33xx" since these boards are manufactured by ISEE not TI. (Javier) > > Changes since v1: > > * Use &node to reference the nodes already defined in dtsi files. (Javier) > > > > Best regards, > > > > Enric Balletbo i Serra (2): > > ARM: dts: AM33XX: Add support for IGEP COM AQUILA > > ARM: dts: AM33XX: Add support for IGEP AQUILA EXPANSION board. > > > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/am335x-base0033.dts | 16 ++ > > arch/arm/boot/dts/am335x-igep0033.dtsi | 265 +++++++++++++++++++++++++++++++++ > > 3 files changed, 282 insertions(+) > > create mode 100644 arch/arm/boot/dts/am335x-base0033.dts > > create mode 100644 arch/arm/boot/dts/am335x-igep0033.dtsi > > > > -- > > 1.8.1.2 > > > > Hi Benoit and Tony, > > Any comments on this series? I had already reviewed previous versions > of the DT and it looks good to me now. > > It would be great if this can make it for 3.13. Looks good to me, I would assume Benoit will be looking at this shortly. Tony ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCHv3 0/2] ARM: dts: Add initial support for IGEP AQUILA 2013-10-03 18:17 ` Tony Lindgren @ 2013-10-04 12:41 ` Benoit Cousson 2013-10-04 22:13 ` Enric Balletbo Serra 0 siblings, 1 reply; 8+ messages in thread From: Benoit Cousson @ 2013-10-04 12:41 UTC (permalink / raw) To: Tony Lindgren Cc: Javier Martinez Canillas, Enric Balletbo i Serra, linux-omap@vger.kernel.org, Enric Balletbo i Serra Hi Enric, On 03/10/2013 20:17, Tony Lindgren wrote: > * Javier Martinez Canillas <martinez.javier@gmail.com> [130925 06:18]: >> On Tue, Sep 10, 2013 at 4:55 PM, Enric Balletbo i Serra >> <eballetbo@gmail.com> wrote: >>> From: Enric Balletbo i Serra <eballetbo@iseebcn.com> >>> >>> Hi all, >>> >>> These two patches introduces initial support for the IGEP AM335x-based >>> platforms. The first patch add support for IGEP COM AQUILA products, and the >>> second patch add support for the development board. >>> >>> These patches apply on top of bcousson/for_3.12/dts repository. >>> >>> Changes since v2: >>> * Make it compatible with "isee,am335x-base0033", "isee,am335x-igep0033", >>> "ti,am33xx" since these boards are manufactured by ISEE not TI. (Javier) >>> Changes since v1: >>> * Use &node to reference the nodes already defined in dtsi files. (Javier) >>> >>> Best regards, >>> >>> Enric Balletbo i Serra (2): >>> ARM: dts: AM33XX: Add support for IGEP COM AQUILA >>> ARM: dts: AM33XX: Add support for IGEP AQUILA EXPANSION board. >>> >>> arch/arm/boot/dts/Makefile | 1 + >>> arch/arm/boot/dts/am335x-base0033.dts | 16 ++ >>> arch/arm/boot/dts/am335x-igep0033.dtsi | 265 +++++++++++++++++++++++++++++++++ >>> 3 files changed, 282 insertions(+) >>> create mode 100644 arch/arm/boot/dts/am335x-base0033.dts >>> create mode 100644 arch/arm/boot/dts/am335x-igep0033.dtsi >>> >>> -- >>> 1.8.1.2 >>> >> >> Hi Benoit and Tony, >> >> Any comments on this series? I had already reviewed previous versions >> of the DT and it looks good to me now. >> >> It would be great if this can make it for 3.13. > > Looks good to me, I would assume Benoit will be looking at this > shortly. I did :-) It looks good to me too, I've just fixed a conflict with my current branch in the Makefile and fix a typo in the header: +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -0,0 +1,16 @@ +/* + * am335x-base0033.dtsi - Device Tree file for IGEP AQUILA EXPANSION Should be am335x-base0033.dts. I fixed it for you. Please check if the fix is ok in the branch. Pushed on my for_3.13/dts branch. Thanks, Benoit ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCHv3 0/2] ARM: dts: Add initial support for IGEP AQUILA 2013-10-04 12:41 ` Benoit Cousson @ 2013-10-04 22:13 ` Enric Balletbo Serra 0 siblings, 0 replies; 8+ messages in thread From: Enric Balletbo Serra @ 2013-10-04 22:13 UTC (permalink / raw) To: Benoit Cousson Cc: Tony Lindgren, Javier Martinez Canillas, linux-omap@vger.kernel.org Hi Benoit, 2013/10/4 Benoit Cousson <bcousson@baylibre.com>: > Hi Enric, > > > On 03/10/2013 20:17, Tony Lindgren wrote: >> >> * Javier Martinez Canillas <martinez.javier@gmail.com> [130925 06:18]: >>> >>> On Tue, Sep 10, 2013 at 4:55 PM, Enric Balletbo i Serra >>> <eballetbo@gmail.com> wrote: >>>> >>>> From: Enric Balletbo i Serra <eballetbo@iseebcn.com> >>>> >>>> Hi all, >>>> >>>> These two patches introduces initial support for the IGEP AM335x-based >>>> platforms. The first patch add support for IGEP COM AQUILA products, and >>>> the >>>> second patch add support for the development board. >>>> >>>> These patches apply on top of bcousson/for_3.12/dts repository. >>>> >>>> Changes since v2: >>>> * Make it compatible with "isee,am335x-base0033", >>>> "isee,am335x-igep0033", >>>> "ti,am33xx" since these boards are manufactured by ISEE not TI. >>>> (Javier) >>>> Changes since v1: >>>> * Use &node to reference the nodes already defined in dtsi files. >>>> (Javier) >>>> >>>> Best regards, >>>> >>>> Enric Balletbo i Serra (2): >>>> ARM: dts: AM33XX: Add support for IGEP COM AQUILA >>>> ARM: dts: AM33XX: Add support for IGEP AQUILA EXPANSION board. >>>> >>>> arch/arm/boot/dts/Makefile | 1 + >>>> arch/arm/boot/dts/am335x-base0033.dts | 16 ++ >>>> arch/arm/boot/dts/am335x-igep0033.dtsi | 265 >>>> +++++++++++++++++++++++++++++++++ >>>> 3 files changed, 282 insertions(+) >>>> create mode 100644 arch/arm/boot/dts/am335x-base0033.dts >>>> create mode 100644 arch/arm/boot/dts/am335x-igep0033.dtsi >>>> >>>> -- >>>> 1.8.1.2 >>>> >>> >>> Hi Benoit and Tony, >>> >>> Any comments on this series? I had already reviewed previous versions >>> of the DT and it looks good to me now. >>> >>> It would be great if this can make it for 3.13. >> >> >> Looks good to me, I would assume Benoit will be looking at this >> shortly. > > > I did :-) > > It looks good to me too, I've just fixed a conflict with my current branch > in the Makefile and fix a typo in the header: > > +++ b/arch/arm/boot/dts/am335x-base0033.dts > @@ -0,0 +1,16 @@ > +/* > + * am335x-base0033.dtsi - Device Tree file for IGEP AQUILA EXPANSION > > Should be am335x-base0033.dts. I fixed it for you. Please check if the fix > is ok in the branch. > Checked. > Pushed on my for_3.13/dts branch. > > Thanks, > Benoit > Thanks, Enric ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 0/2] ARM: dts: Add initial support for IGEP AQUILA @ 2013-06-19 8:27 Enric Balletbo i Serra 2013-06-19 8:27 ` [PATCH 2/2] ARM: dts: AM33XX: Add support for IGEP AQUILA EXPANSION board Enric Balletbo i Serra 0 siblings, 1 reply; 8+ messages in thread From: Enric Balletbo i Serra @ 2013-06-19 8:27 UTC (permalink / raw) To: linux-omap, Benoit Cousson, Tony Lindgren, Javier Martinez Canillas Cc: Enric Balletbo i Serra Hi all, These two patches introduces initial support for the IGEP AM335x-based platforms. The first patch add support for IGEP COM AQUILA products, and the second patch add support for the development board. These patches apply on top of bcousson/for_3.11/dts repository. Best regards, Enric Balletbo i Serra (2): ARM: dts: AM33XX: Add support for IGEP COM AQUILA ARM: dts: AM33XX: Add support for IGEP AQUILA EXPANSION board. arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/am335x-base0033.dts | 17 +++ arch/arm/boot/dts/am335x-igep0033.dtsi | 269 +++++++++++++++++++++++++++++++++ 3 files changed, 288 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/am335x-base0033.dts create mode 100644 arch/arm/boot/dts/am335x-igep0033.dtsi -- 1.8.1.2 ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/2] ARM: dts: AM33XX: Add support for IGEP AQUILA EXPANSION board. 2013-06-19 8:27 [PATCH " Enric Balletbo i Serra @ 2013-06-19 8:27 ` Enric Balletbo i Serra 0 siblings, 0 replies; 8+ messages in thread From: Enric Balletbo i Serra @ 2013-06-19 8:27 UTC (permalink / raw) To: linux-omap, Benoit Cousson, Tony Lindgren, Javier Martinez Canillas Cc: Enric Balletbo i Serra The IGEP AQUILA EXPANSION board is a development platform for the IGEP COM AQUILA AM335x boards. The board adds the following connectivity: o USB OTG o USB HOST o HDMI o Ethernet o Serial Debug (3.3V) o 2x46 pin headers o EEPROM Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/am335x-base0033.dts | 17 +++++++++++++++++ 2 files changed, 18 insertions(+) create mode 100644 arch/arm/boot/dts/am335x-base0033.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8e50761..cb675d2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -154,6 +154,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ am335x-bone.dtb \ + am335x-base0033.dtb \ am3517-evm.dtb \ am3517_mt_ventoux.dtb dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts new file mode 100644 index 0000000..a365f11 --- /dev/null +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * IGEP AQUILA Expansion Board. + * + */ + +#include "am335x-igep0033.dtsi" + +/ { + model = "IGEP COM AM335x on AQUILA Expansion"; + compatible = "ti,am335x-base0033", "ti,am335x-igep0033", "ti,am33xx"; +}; -- 1.8.1.2 ^ permalink raw reply related [flat|nested] 8+ messages in thread
end of thread, other threads:[~2013-10-04 22:13 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-09-10 14:55 [PATCHv3 0/2] ARM: dts: Add initial support for IGEP AQUILA Enric Balletbo i Serra 2013-09-10 14:55 ` [PATCH 1/2] ARM: dts: AM33XX: Add support for IGEP COM AQUILA Enric Balletbo i Serra 2013-09-10 14:55 ` [PATCH 2/2] ARM: dts: AM33XX: Add support for IGEP AQUILA EXPANSION board Enric Balletbo i Serra 2013-09-25 13:10 ` [PATCHv3 0/2] ARM: dts: Add initial support for IGEP AQUILA Javier Martinez Canillas 2013-10-03 18:17 ` Tony Lindgren 2013-10-04 12:41 ` Benoit Cousson 2013-10-04 22:13 ` Enric Balletbo Serra -- strict thread matches above, loose matches on Subject: below -- 2013-06-19 8:27 [PATCH " Enric Balletbo i Serra 2013-06-19 8:27 ` [PATCH 2/2] ARM: dts: AM33XX: Add support for IGEP AQUILA EXPANSION board Enric Balletbo i Serra
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).