Re: [PATCH v5 1/3] usb: dwc3: msm: Add device tree binding information

["Ivan T. Ivanov" <iivanov@mm-sol.com>]

Hi, 

On Mon, 2013-09-23 at 16:03 -0600, Stephen Warren wrote: 
> On 09/23/2013 01:32 PM, Felipe Balbi wrote:
> > Hi,
> > 
> > On Wed, Aug 21, 2013 at 04:29:44PM +0300, Ivan T. Ivanov wrote:
> >> From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
> >> 
> >> MSM USB3.0 core wrapper consist of USB3.0 IP from Synopsys (SNPS)
> >> and HS, SS PHY's control and configuration registers.
> >> 
> >> It could operate in device mode (SS, HS, FS) and host mode (SS,
> >> HS, FS, LS).
> >> 
> >> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
> > 
> > and here's a new version from same patch
> 
> The binding looks pretty simple, so I don't think it's too contentious.
> 
> >> diff --git a/Documentation/devicetree/bindings/usb/msm-ssusb.txt
> >> b/Documentation/devicetree/bindings/usb/msm-ssusb.txt
> 
> >> +MSM DWC3 controller wrapper
> 
> >> +Optional properties : +- gdsc-supply : phandle to the globally
> >> distributed switch controller +  regulator node to the USB
> >> controller.
> 
> If that's a regulator node, why not use xxx-supply properties to
> interface with it?

That was the intention. What about:

Optional "supply-name" :
    "gdsc" - supply from globally distributed switch controller


> 
> Aside from that, the binding,
> Acked-by: Stephen Warren <swarren@nvidia.com>

Thank you.

Regards,
Ivan