linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Mack <zonque@gmail.com>
To: linux-usb@vger.kernel.org
Cc: linux-omap@vger.kernel.org, neumann@teufel.de,
	bigeasy@linutronix.de, vinod.koul@intel.com,
	dan.j.williams@intel.com, balbi@ti.com,
	Daniel Mack <zonque@gmail.com>
Subject: [PATCH v2 5/5] usb: musb: dsps: add support for suspend and resume
Date: Tue,  1 Oct 2013 15:39:57 +0200	[thread overview]
Message-ID: <1380634797-29541-6-git-send-email-zonque@gmail.com> (raw)
In-Reply-To: <1380634797-29541-1-git-send-email-zonque@gmail.com>

The dsps platform needs to save save some registers at suspend time and
restore them after resume. This patch adds a struct for these registers,
and also lets the musb core know that the core registers need to be
saved as well.

Signed-off-by: Daniel Mack <zonque@gmail.com>
---
 drivers/usb/musb/musb_dsps.c | 60 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index f3085bc..ac68e29 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -112,6 +112,19 @@ struct dsps_musb_wrapper {
 	u8		poll_seconds;
 };
 
+/*
+ * register shadow for suspend
+ */
+struct dsps_context {
+	u32 control;
+	u32 epintr;
+	u32 coreintr;
+	u32 phy_utmi;
+	u32 mode;
+	u32 tx_mode;
+	u32 rx_mode;
+};
+
 /**
  * DSPS glue structure.
  */
@@ -121,6 +134,8 @@ struct dsps_glue {
 	const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */
 	struct timer_list timer;	/* otg_workaround timer */
 	unsigned long last_timer;    /* last timer data for each instance */
+
+	struct dsps_context context;
 };
 
 /**
@@ -504,6 +519,7 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue,
 	}
 	pdata.config = config;
 	pdata.platform_ops = &dsps_ops;
+	pdata.restore_after_suspend = 1;
 
 	config->num_eps = get_int_prop(dn, "mentor,num-eps");
 	config->ram_bits = get_int_prop(dn, "mentor,ram-bits");
@@ -627,11 +643,55 @@ static const struct of_device_id musb_dsps_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, musb_dsps_of_match);
 
+#ifdef CONFIG_PM
+static int dsps_suspend(struct device *dev)
+{
+	struct dsps_glue *glue = dev_get_drvdata(dev);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	struct musb *musb = platform_get_drvdata(glue->musb);
+	void __iomem *mbase = musb->ctrl_base;
+
+	glue->context.control = dsps_readl(mbase, wrp->control);
+	glue->context.epintr = dsps_readl(mbase, wrp->epintr_set);
+	glue->context.coreintr = dsps_readl(mbase, wrp->coreintr_set);
+	glue->context.phy_utmi = dsps_readl(mbase, wrp->phy_utmi);
+	glue->context.mode = dsps_readl(mbase, wrp->mode);
+	glue->context.tx_mode = dsps_readl(mbase, wrp->tx_mode);
+	glue->context.rx_mode = dsps_readl(mbase, wrp->rx_mode);
+
+	return 0;
+}
+
+static int dsps_resume(struct device *dev)
+{
+	struct dsps_glue *glue = dev_get_drvdata(dev);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	struct musb *musb = platform_get_drvdata(glue->musb);
+	void __iomem *mbase = musb->ctrl_base;
+
+	dsps_writel(mbase, wrp->control, glue->context.control);
+	dsps_writel(mbase, wrp->epintr_set, glue->context.epintr);
+	dsps_writel(mbase, wrp->coreintr_set, glue->context.coreintr);
+	dsps_writel(mbase, wrp->phy_utmi, glue->context.phy_utmi);
+	dsps_writel(mbase, wrp->mode, glue->context.mode);
+	dsps_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
+	dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
+
+	musb->port_reset_state = false;
+	schedule_work(&musb->port_reset_work);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(dsps_pm_ops, dsps_suspend, dsps_resume);
+
 static struct platform_driver dsps_usbss_driver = {
 	.probe		= dsps_probe,
 	.remove         = dsps_remove,
 	.driver         = {
 		.name   = "musb-dsps",
+		.pm	= &dsps_pm_ops,
 		.of_match_table	= of_match_ptr(musb_dsps_of_match),
 	},
 };
-- 
1.8.3.1


  parent reply	other threads:[~2013-10-01 13:40 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-01 13:39 [PATCH v2 0/5] usb: musb_dsps: support for suspend and resume Daniel Mack
2013-10-01 13:39 ` [PATCH v2 1/5] usb: musb: move port reset to worker Daniel Mack
2013-10-02 10:46   ` Sebastian Andrzej Siewior
2013-10-02 11:19     ` Daniel Mack
     [not found] ` <1380634797-29541-1-git-send-email-zonque-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-10-01 13:39   ` [PATCH v2 2/5] usb: musb: call musb_port_suspend from musb_bus_suspend Daniel Mack
2013-10-02 10:49     ` Sebastian Andrzej Siewior
2013-10-02 11:14       ` Daniel Mack
     [not found]         ` <524C001B.8040901-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-10-02 12:01           ` Sebastian Andrzej Siewior
2013-10-02 12:12             ` Daniel Mack
     [not found]               ` <524C0D94.8050100-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-10-02 14:52                 ` Alan Stern
2013-10-01 13:39 ` [PATCH v2 3/5] usb: musb: conditionally save and restore the context on suspend Daniel Mack
2013-10-01 13:39 ` [PATCH v2 4/5] usb: musb: dsps: add {tx,rx}_mode to wrapper Daniel Mack
2013-10-01 13:39 ` Daniel Mack [this message]
2013-10-01 14:59   ` [PATCH v2 5/5] usb: musb: dsps: add support for suspend and resume Felipe Balbi
2013-10-01 15:04     ` Daniel Mack
     [not found]       ` <524AE464.3020201-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-10-01 16:03         ` Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1380634797-29541-6-git-send-email-zonque@gmail.com \
    --to=zonque@gmail.com \
    --cc=balbi@ti.com \
    --cc=bigeasy@linutronix.de \
    --cc=dan.j.williams@intel.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=neumann@teufel.de \
    --cc=vinod.koul@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).