linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Mack <zonque@gmail.com>
To: linux-omap@vger.kernel.org, joelf@ti.com, gururaja.hebbar@ti.com,
	balajitk@ti.com
Cc: s.neumann@raumfeld.com, mporter@ti.com, nsekhar@ti.com,
	Russ.Dill@ti.com, linux-arm-kernel@lists.infradead.org,
	Daniel Mack <zonque@gmail.com>
Subject: [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks
Date: Wed, 30 Oct 2013 21:21:08 +0100	[thread overview]
Message-ID: <1383164468-4610-1-git-send-email-zonque@gmail.com> (raw)

This patch makes the edma driver resume correctly after suspend. Tested
on an AM33xx platform with cyclic audio streams and omap_hsmmc.

All information can be reconstructed by already known runtime
information.

As we now use some functions that were previously only used from __init
context, annotations had to be dropped.

Signed-off-by: Daniel Mack <zonque@gmail.com>
---
There was actually only a v3 ever, I made a mistake when formating the
first version of this patch. To prevent confusion though, I named this
one v4.

v3 -> v4:
	* dropped extra allocations, and reconstruct register values
	  from already known driver states.



Hi Joel, Gururaja, Balaji,

thanks a lot for your feedback. I successfully tested this version with
davinci mcasp as well as omap_hsmmc. I'd appreciate another round of
reviews :)


Thanks,
Daniel

 arch/arm/common/edma.c | 82 ++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 79 insertions(+), 3 deletions(-)

diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index 8e1a024..f15cdb9 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -239,6 +239,8 @@ struct edma {
 	/* list of channels with no even trigger; terminated by "-1" */
 	const s8	*noevent;
 
+	struct edma_soc_info *info;
+
 	/* The edma_inuse bit for each PaRAM slot is clear unless the
 	 * channel is in use ... by ARM or DSP, for QDMA, or whatever.
 	 */
@@ -290,13 +292,13 @@ static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
 			~(0x7 << bit), queue_no << bit);
 }
 
-static void __init map_queue_tc(unsigned ctlr, int queue_no, int tc_no)
+static void map_queue_tc(unsigned ctlr, int queue_no, int tc_no)
 {
 	int bit = queue_no * 4;
 	edma_modify(ctlr, EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
 }
 
-static void __init assign_priority_to_queue(unsigned ctlr, int queue_no,
+static void assign_priority_to_queue(unsigned ctlr, int queue_no,
 		int priority)
 {
 	int bit = queue_no * 4;
@@ -315,7 +317,7 @@ static void __init assign_priority_to_queue(unsigned ctlr, int queue_no,
  * included in that particular EDMA variant (Eg : dm646x)
  *
  */
-static void __init map_dmach_param(unsigned ctlr)
+static void map_dmach_param(unsigned ctlr)
 {
 	int i;
 	for (i = 0; i < EDMA_MAX_DMACH; i++)
@@ -1785,15 +1787,89 @@ static int edma_probe(struct platform_device *pdev)
 			edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
 			edma_write_array(j, EDMA_QRAE, i, 0x0);
 		}
+		edma_cc[j]->info = info[j];
 		arch_num_cc++;
 	}
 
 	return 0;
 }
 
+static int edma_pm_suspend(struct device *dev)
+{
+	int j;
+
+	pm_runtime_get_sync(dev);
+
+	for (j = 0; j < arch_num_cc; j++) {
+		struct edma *ecc = edma_cc[j];
+
+		disable_irq(ecc->irq_res_start);
+		disable_irq(ecc->irq_res_end);
+	}
+
+	pm_runtime_put_sync(dev);
+
+	return 0;
+}
+
+static int edma_pm_resume(struct device *dev)
+{
+	int i, j;
+
+	pm_runtime_get_sync(dev);
+
+	for (j = 0; j < arch_num_cc; j++) {
+		struct edma *cc = edma_cc[j];
+
+		s8 (*queue_priority_mapping)[2];
+		s8 (*queue_tc_mapping)[2];
+
+		queue_tc_mapping = cc->info->queue_tc_mapping;
+		queue_priority_mapping = cc->info->queue_priority_mapping;
+
+		/* Event queue to TC mapping */
+		for (i = 0; queue_tc_mapping[i][0] != -1; i++)
+			map_queue_tc(j, queue_tc_mapping[i][0],
+					queue_tc_mapping[i][1]);
+
+		/* Event queue priority mapping */
+		for (i = 0; queue_priority_mapping[i][0] != -1; i++)
+			assign_priority_to_queue(j,
+						queue_priority_mapping[i][0],
+						queue_priority_mapping[i][1]);
+
+		/* Map the channel to param entry if channel mapping logic
+		 * exist
+		 */
+		if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
+			map_dmach_param(j);
+
+		for (i = 0; i < cc->num_channels; i++)
+			if (test_bit(i, cc->edma_inuse)) {
+				/* ensure access through shadow region 0 */
+				edma_or_array2(j, EDMA_DRAE, 0, i >> 5,
+						BIT(i & 0x1f));
+
+				setup_dma_interrupt(i,
+						    cc->intr_data[i].callback,
+						    cc->intr_data[i].data);
+			}
+
+		enable_irq(cc->irq_res_start);
+		enable_irq(cc->irq_res_end);
+	}
+
+	pm_runtime_put_sync(dev);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(edma_pm_ops, edma_pm_suspend, edma_pm_resume);
+
 static struct platform_driver edma_driver = {
 	.driver = {
 		.name	= "edma",
+		.pm	= &edma_pm_ops,
 		.of_match_table = edma_of_ids,
 	},
 	.probe = edma_probe,
-- 
1.8.3.1


             reply	other threads:[~2013-10-30 20:21 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-30 20:21 Daniel Mack [this message]
2013-10-31 22:25 ` [PATCH v4] ARM: omap: edma: add suspend suspend/resume hooks Vaibhav Bedia
2013-11-06 17:36   ` Joel Fernandes
2013-11-07 13:30     ` Gururaja Hebbar
2013-11-07 13:32       ` Daniel Mack
2013-11-07 15:18         ` Nishanth Menon
2013-11-07 15:36           ` Daniel Mack
2013-11-07 15:48             ` Nishanth Menon
2013-11-07 20:42               ` Vaibhav Bedia
2013-11-15 14:39                 ` Nishanth Menon
2013-11-17 22:09                   ` Daniel Mack
2013-11-07 20:34     ` Vaibhav Bedia
2013-11-07 15:34 ` Nishanth Menon
2013-11-07 16:27   ` Grygorii Strashko
2013-11-07 20:46     ` Vaibhav Bedia
2013-11-07 16:34 ` Joel Fernandes
2013-11-07 16:49   ` Joel Fernandes
2013-11-07 17:37   ` Daniel Mack
2013-11-07 21:39     ` Joel Fernandes
2013-11-08  4:07     ` Gururaja Hebbar
2013-11-08  7:51       ` Daniel Mack

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1383164468-4610-1-git-send-email-zonque@gmail.com \
    --to=zonque@gmail.com \
    --cc=Russ.Dill@ti.com \
    --cc=balajitk@ti.com \
    --cc=gururaja.hebbar@ti.com \
    --cc=joelf@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mporter@ti.com \
    --cc=nsekhar@ti.com \
    --cc=s.neumann@raumfeld.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).