[PATCH] ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume

[Nishanth Menon <nm@ti.com>]

OMAP device hooks around suspend|resume_noirq ensures that hwmod
devices are forced to idle using omap_device_idle/enable as part of
the last stage of suspend activity.

For a device such as i2c who uses autosuspend, it is possible to enter
the suspend path with dev->power.runtime_status = RPM_ACTIVE.

As part of the suspend flow, the generic runtime logic would increment
it's dev->power.disable_depth to 1. This should prevent further
pm_runtime_get_sync from succeeding once the runtime_status has been
set to RPM_SUSPENDED.

Now, as part of the suspend_noirq handler in omap_device, we force the
following: if the device status is !suspended, we force the device
to idle using omap_device_idle (clocks are cut etc..). This ensures
that from a hardware perspective, the device is "suspended". However,
runtime_status is left to be active.

*if* an operation is attempted after this point to
pm_runtime_get_sync, runtime framework depends on runtime_status to
indicate accurately the device status, and since it sees it to be
ACTIVE, it assumes the module is functional and returns a non-error
value. As a result the user will see pm_runtime_get succeed, however a
register access will crash due to the lack of clocks.

To prevent this from happening, we should ensure that runtime_status
exactly indicates the device status. As a result of this change
any further calls to pm_runtime_get* would return -EACCES (since
disable_depth is 1). On resume, we restore the clocks and runtime
status exactly as we suspended with.

Reported-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
---
patch baseline: V3.12 tag (also applies on linux-next next-20131107 tag)

Logs from 3.12 based vendor kernel:
Before: http://pastebin.com/m5KxnB7a
After: http://pastebin.com/8AfX4e7r

The discussion on cpufreq side of the story which triggered this scenario:
	http://marc.info/?l=linux-pm&m=138263811321921&w=2

Tested on TI vendor kernel (with dt boot):
	AM335x: evm, BBB, sk, BBW
	OMAP5uEVM, DRA7-evm

 arch/arm/mach-omap2/omap_device.c |   16 ++++++++++++++--
 arch/arm/mach-omap2/omap_device.h |    1 +
 2 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index b69dd9a..87ecbb0 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -621,6 +621,13 @@ static int _od_suspend_noirq(struct device *dev)
 
 	if (!ret && !pm_runtime_status_suspended(dev)) {
 		if (pm_generic_runtime_suspend(dev) == 0) {
+			if (!pm_runtime_suspended(dev)) {
+				/* NOTE: *might* indicate driver race */
+				dev_dbg(dev, "%s: Force suspending\n",
+					__func__);
+				pm_runtime_set_suspended(dev);
+				od->flags |= OMAP_DEVICE_SUSPEND_FORCED;
+			}
 			omap_device_idle(pdev);
 			od->flags |= OMAP_DEVICE_SUSPENDED;
 		}
@@ -634,10 +641,15 @@ static int _od_resume_noirq(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_device *od = to_omap_device(pdev);
 
-	if ((od->flags & OMAP_DEVICE_SUSPENDED) &&
-	    !pm_runtime_status_suspended(dev)) {
+	if (od->flags & OMAP_DEVICE_SUSPENDED) {
 		od->flags &= ~OMAP_DEVICE_SUSPENDED;
 		omap_device_enable(pdev);
+
+		if (od->flags & OMAP_DEVICE_SUSPEND_FORCED) {
+			pm_runtime_set_active(dev);
+			od->flags &= ~OMAP_DEVICE_SUSPEND_FORCED;
+		}
+
 		pm_generic_runtime_resume(dev);
 	}
 
diff --git a/arch/arm/mach-omap2/omap_device.h b/arch/arm/mach-omap2/omap_device.h
index 17ca1ae..45885b0 100644
--- a/arch/arm/mach-omap2/omap_device.h
+++ b/arch/arm/mach-omap2/omap_device.h
@@ -38,6 +38,7 @@ extern struct dev_pm_domain omap_device_pm_domain;
 
 /* omap_device.flags values */
 #define OMAP_DEVICE_SUSPENDED		BIT(0)
+#define OMAP_DEVICE_SUSPEND_FORCED	BIT(1)
 
 /**
  * struct omap_device - omap_device wrapper for platform_devices
-- 
1.7.9.5