From: Jarkko Nikula <jarkko.nikula@bitmer.com>
To: linux-mmc@vger.kernel.org
Cc: Chris Ball <chris@printf.net>,
linux-omap@vger.kernel.org, Tony Lindgren <tony@atomide.com>,
Aaro Koskinen <aaro.koskinen@iki.fi>,
Jarkko Nikula <jarkko.nikula@bitmer.com>
Subject: [RESEND 1/7] mmc: omap: Fix NULL pointer dereference due uninitialized cover_tasklet
Date: Sat, 22 Feb 2014 18:01:37 +0200 [thread overview]
Message-ID: <1393084903-7194-2-git-send-email-jarkko.nikula@bitmer.com> (raw)
In-Reply-To: <1393084903-7194-1-git-send-email-jarkko.nikula@bitmer.com>
Omap MMC driver initialization can cause a NULL pointer dereference in
tasklet_hi_action on Nokia N810 if its miniSD cover is open during driver
initialization.
[ 1.070000] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 1.080000] pgd = c0004000
[ 1.080000] [00000000] *pgd=00000000
[ 1.080000] Internal error: Oops: 80000005 [#1] PREEMPT ARM
[ 1.080000] Modules linked in:
[ 1.080000] CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 3.13.0-rc2+ #95
[ 1.080000] Workqueue: events menelaus_work
[ 1.080000] task: c7863340 ti: c7878000 task.ti: c7878000
[ 1.080000] PC is at 0x0
[ 1.080000] LR is at tasklet_hi_action+0x68/0xa4
...
[ 1.080000] [<c003543c>] (tasklet_hi_action+0x68/0xa4) from [<c0034dd0>] (__do_softirq+0xbc/0x208)
[ 1.080000] [<c0034dd0>] (__do_softirq+0xbc/0x208) from [<c003521c>] (irq_exit+0x84/0xac)
[ 1.080000] [<c003521c>] (irq_exit+0x84/0xac) from [<c00135cc>] (handle_IRQ+0x64/0x84)
[ 1.080000] [<c00135cc>] (handle_IRQ+0x64/0x84) from [<c000859c>] (omap2_intc_handle_irq+0x54/0x68)
[ 1.080000] [<c000859c>] (omap2_intc_handle_irq+0x54/0x68) from [<c0015be0>] (__irq_svc+0x40/0x74)
[ 1.080000] Exception stack(0xc7879d70 to 0xc7879db8)
[ 1.080000] 9d60: 000003f1 0000000a 00000009 0000001c
[ 1.080000] 9d80: c7879e70 c780bc10 c780bc10 00000000 00000001 00008603 c780bc78 c7879e4e
[ 1.080000] 9da0: 00000002 c7879db8 c00343b0 c0160c9c 20000113 ffffffff
[ 1.080000] [<c0015be0>] (__irq_svc+0x40/0x74) from [<c0160c9c>] (__aeabi_uidiv+0x20/0x9c)
[ 1.080000] [<c0160c9c>] (__aeabi_uidiv+0x20/0x9c) from [<c00343b0>] (msecs_to_jiffies+0x18/0x24)
[ 1.080000] [<c00343b0>] (msecs_to_jiffies+0x18/0x24) from [<c01ec3ec>] (omap_i2c_xfer+0x30c/0x458)
[ 1.080000] [<c01ec3ec>] (omap_i2c_xfer+0x30c/0x458) from [<c01e9724>] (__i2c_transfer+0x3c/0x74)
[ 1.080000] [<c01e9724>] (__i2c_transfer+0x3c/0x74) from [<c01eac4c>] (i2c_transfer+0x78/0x94)
[ 1.080000] [<c01eac4c>] (i2c_transfer+0x78/0x94) from [<c01eb0bc>] (i2c_smbus_xfer+0x3c0/0x4f8)
[ 1.080000] [<c01eb0bc>] (i2c_smbus_xfer+0x3c0/0x4f8) from [<c01eb414>] (i2c_smbus_write_byte_data+0x34/0x3c)
[ 1.080000] [<c01eb414>] (i2c_smbus_write_byte_data+0x34/0x3c) from [<c01bb308>] (menelaus_write_reg+0x1c/0x40)
[ 1.080000] [<c01bb308>] (menelaus_write_reg+0x1c/0x40) from [<c01bb904>] (menelaus_work+0xa0/0xc4)
[ 1.080000] [<c01bb904>] (menelaus_work+0xa0/0xc4) from [<c00439c4>] (process_one_work+0x1fc/0x334)
[ 1.080000] [<c00439c4>] (process_one_work+0x1fc/0x334) from [<c0043d6c>] (worker_thread+0x244/0x380)
[ 1.080000] [<c0043d6c>] (worker_thread+0x244/0x380) from [<c0049d04>] (kthread+0xc0/0xd4)
[ 1.080000] [<c0049d04>] (kthread+0xc0/0xd4) from [<c0012758>] (ret_from_fork+0x14/0x3c)
[ 1.080000] Code: bad PC value
[ 1.090000] ---[ end trace 7bc2fc7cd14f1d95 ]---
[ 1.100000] Kernel panic - not syncing: Fatal exception in interrupt
Reason for this is that omap_notify_cover_event which calls
tasklet_hi_schedule gets called before struct cover_tasklet is initialized.
Call to omap_notify_cover_event on Nokia N810 happens from menelaus.c PMIC
driver via board-n8x0.c during execution of mmc_add_host in case of open
miniSD cover.
Fix this by moving cover_timer and cover_tasklet initialization before
mmc_add_host call in mmc_omap_new_slot.
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
---
v2: a snip of stack dump added to commit log
---
drivers/mmc/host/omap.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 98b6b6ef7e5c..42b665dfaa73 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1262,6 +1262,13 @@ static int mmc_omap_new_slot(struct mmc_omap_host *host, int id)
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
mmc->max_seg_size = mmc->max_req_size;
+ if (slot->pdata->get_cover_state != NULL) {
+ setup_timer(&slot->cover_timer, mmc_omap_cover_timer,
+ (unsigned long)slot);
+ tasklet_init(&slot->cover_tasklet, mmc_omap_cover_handler,
+ (unsigned long)slot);
+ }
+
r = mmc_add_host(mmc);
if (r < 0)
goto err_remove_host;
@@ -1278,11 +1285,6 @@ static int mmc_omap_new_slot(struct mmc_omap_host *host, int id)
&dev_attr_cover_switch);
if (r < 0)
goto err_remove_slot_name;
-
- setup_timer(&slot->cover_timer, mmc_omap_cover_timer,
- (unsigned long)slot);
- tasklet_init(&slot->cover_tasklet, mmc_omap_cover_handler,
- (unsigned long)slot);
tasklet_schedule(&slot->cover_tasklet);
}
--
1.8.5.3
next prev parent reply other threads:[~2014-02-22 16:17 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-22 16:01 [RESEND 0/7] mmc: omap: Fixes, cleanup and add ERASE capability Jarkko Nikula
2014-02-22 16:01 ` Jarkko Nikula [this message]
2014-02-22 16:01 ` [RESEND 2/7] mmc: omap: Convert to devm_kzalloc Jarkko Nikula
2014-02-22 16:01 ` [RESEND 3/7] mmc: omap: Remove duplicate host->irq assignment Jarkko Nikula
2014-02-22 16:01 ` [RESEND 4/7] mmc: omap: Remove mem_res field from struct mmc_omap_host Jarkko Nikula
2014-02-22 16:01 ` [RESEND 5/7] mmc: omap: Convert to devm_ioremap_resource Jarkko Nikula
2014-02-22 16:01 ` [RESEND 6/7] mmc: omap: Remove always set use_dma flag from struct mmc_omap_host Jarkko Nikula
2014-02-22 16:01 ` [RESEND 7/7] mmc: omap: Add erase capability Jarkko Nikula
2014-02-22 18:18 ` [RESEND 0/7] mmc: omap: Fixes, cleanup and add ERASE capability Chris Ball
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393084903-7194-2-git-send-email-jarkko.nikula@bitmer.com \
--to=jarkko.nikula@bitmer.com \
--cc=aaro.koskinen@iki.fi \
--cc=chris@printf.net \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).