From: Sebastian Reichel <sre@debian.org>
To: "Sebastian Reichel" <sre@ring0.de>,
"Tony Lindgren" <tony@atomide.com>,
"Benoît Cousson" <bcousson@baylibre.com>,
"John W. Linville" <linville@tuxdriver.com>
Cc: devicetree@vger.kernel.org, linux-omap@vger.kernel.org,
Sebastian Reichel <sre@debian.org>
Subject: [PATCH] DTS: ARM: OMAP3-N900: Add WL1251 support
Date: Thu, 13 Mar 2014 22:59:55 +0100 [thread overview]
Message-ID: <1394747995-25090-2-git-send-email-sre@debian.org> (raw)
In-Reply-To: <1394747995-25090-1-git-send-email-sre@debian.org>
Add device tree support for the wireless chip
built into the Nokia N900.
Signed-off-by: Sebastian Reichel <sre@debian.org>
---
arch/arm/boot/dts/omap3-n900.dts | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index e91dae7..0f48b9b 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -148,6 +148,15 @@
>;
};
+ mcspi4_pins: pinmux_mcspi4_pins {
+ pinctrl-single,pins = <
+ 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
+ 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
+ 0x160 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
+ 0x166 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
+ >;
+ };
+
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
@@ -203,6 +212,13 @@
0x15e (PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */
>;
};
+
+ wl1251_pins: pinmux_wl1251 {
+ pinctrl-single,pins = <
+ 0x0ce (PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */
+ 0x05a (PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */
+ >;
+ };
};
&i2c1 {
@@ -603,6 +619,30 @@
};
};
+&mcspi4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi4_pins>;
+
+ wl1251@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl1251_pins>;
+
+ vio-supply = <&vio>;
+
+ compatible = "ti,wl1251";
+ reg = <0>;
+ spi-max-frequency = <48000000>;
+
+ spi-cpol;
+ spi-cpha;
+
+ ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
+ };
+};
+
&usb_otg_hs {
interface-type = <0>;
usb-phy = <&usb2_phy>;
--
1.9.0
next prev parent reply other threads:[~2014-03-13 22:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-13 21:59 [PATCH] wl1251 device tree support Sebastian Reichel
2014-03-13 21:59 ` Sebastian Reichel [this message]
2014-05-05 19:25 ` [PATCH] DTS: ARM: OMAP3-N900: Add WL1251 support Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1394747995-25090-2-git-send-email-sre@debian.org \
--to=sre@debian.org \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=sre@ring0.de \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).