From: Taras Kondratiuk <taras.kondratiuk@linaro.org>
To: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Victor Kamensky <victor.kamensky@linaro.org>,
Taras Kondratiuk <taras.kondratiuk@linaro.org>
Subject: [RESEND PATCH 2/4] ARM: OMAP: dmtimer: raw read and write endian fix
Date: Tue, 15 Apr 2014 20:37:47 +0300 [thread overview]
Message-ID: <1397583469-14457-3-git-send-email-taras.kondratiuk@linaro.org> (raw)
In-Reply-To: <1397583469-14457-1-git-send-email-taras.kondratiuk@linaro.org>
From: Victor Kamensky <victor.kamensky@linaro.org>
All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.
Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.
Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
arch/arm/plat-omap/dmtimer.c | 8 ++++----
arch/arm/plat-omap/include/plat/dmtimer.h | 16 ++++++++--------
2 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 869254c..db10169 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -103,7 +103,7 @@ static void omap_timer_restore_context(struct omap_dm_timer *timer)
timer->context.tmar);
omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG,
timer->context.tsicr);
- __raw_writel(timer->context.tier, timer->irq_ena);
+ writel_relaxed(timer->context.tier, timer->irq_ena);
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG,
timer->context.tclr);
}
@@ -699,9 +699,9 @@ int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask)
omap_dm_timer_enable(timer);
if (timer->revision == 1)
- l = __raw_readl(timer->irq_ena) & ~mask;
+ l = readl_relaxed(timer->irq_ena) & ~mask;
- __raw_writel(l, timer->irq_dis);
+ writel_relaxed(l, timer->irq_dis);
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_WAKEUP_EN_REG) & ~mask;
omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, l);
@@ -722,7 +722,7 @@ unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
return 0;
}
- l = __raw_readl(timer->irq_stat);
+ l = readl_relaxed(timer->irq_stat);
return l;
}
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 2861b15..dd79f30 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -280,20 +280,20 @@ static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
int posted)
{
if (posted)
- while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
+ while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
cpu_relax();
- return __raw_readl(timer->func_base + (reg & 0xff));
+ return readl_relaxed(timer->func_base + (reg & 0xff));
}
static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
u32 reg, u32 val, int posted)
{
if (posted)
- while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
+ while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
cpu_relax();
- __raw_writel(val, timer->func_base + (reg & 0xff));
+ writel_relaxed(val, timer->func_base + (reg & 0xff));
}
static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
@@ -301,7 +301,7 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
u32 tidr;
/* Assume v1 ip if bits [31:16] are zero */
- tidr = __raw_readl(timer->io_base);
+ tidr = readl_relaxed(timer->io_base);
if (!(tidr >> 16)) {
timer->revision = 1;
timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
@@ -385,7 +385,7 @@ static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
}
/* Ack possibly pending interrupt */
- __raw_writel(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
+ writel_relaxed(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
}
static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
@@ -399,7 +399,7 @@ static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
unsigned int value)
{
- __raw_writel(value, timer->irq_ena);
+ writel_relaxed(value, timer->irq_ena);
__omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
}
@@ -412,7 +412,7 @@ __omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
unsigned int value)
{
- __raw_writel(value, timer->irq_stat);
+ writel_relaxed(value, timer->irq_stat);
}
#endif /* __ASM_ARCH_DMTIMER_H */
--
1.7.9.5
next prev parent reply other threads:[~2014-04-15 17:38 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-15 17:37 [RESEND PATCH 0/4] ARM: OMAP: raw read and write endian fix Taras Kondratiuk
2014-04-15 17:37 ` [RESEND PATCH 1/4] ARM: OMAP2+: " Taras Kondratiuk
2014-04-15 17:37 ` Taras Kondratiuk [this message]
2014-04-15 17:37 ` [RESEND PATCH 3/4] ARM: OMAP: counter-32k: " Taras Kondratiuk
2014-04-15 17:37 ` [RESEND PATCH 4/4] ARM: OMAP: debug-leds: " Taras Kondratiuk
2014-05-08 14:23 ` [RESEND PATCH 0/4] ARM: OMAP: " Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397583469-14457-3-git-send-email-taras.kondratiuk@linaro.org \
--to=taras.kondratiuk@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
--cc=victor.kamensky@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).