From: Sricharan R <r.sricharan@ti.com>
To: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: nm@ti.com, rnayak@ti.com, santosh.shilimkar@ti.com, tony@atomide.com
Subject: [PATCH 3/5] irqchip: crossbar: Skip some irqs from getting mapped to crossbar
Date: Mon, 5 May 2014 19:48:45 +0530 [thread overview]
Message-ID: <1399299527-10955-4-git-send-email-r.sricharan@ti.com> (raw)
In-Reply-To: <1399299527-10955-1-git-send-email-r.sricharan@ti.com>
From: Nishanth Menon <nm@ti.com>
When, in the system due to varied reasons, interrupts might be unusable
due to hardware behavior, but register maps do exist, then those interrupts
should be skipped while mapping irq to crossbars.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sricharan R <r.sricharan@ti.com>
---
drivers/irqchip/irq-crossbar.c | 47 ++++++++++++++++++++++++++++++++++++----
1 file changed, 43 insertions(+), 4 deletions(-)
diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c
index 51d4b87..847f6e3 100644
--- a/drivers/irqchip/irq-crossbar.c
+++ b/drivers/irqchip/irq-crossbar.c
@@ -13,11 +13,13 @@
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
+#include <linux/of_device.h>
#include <linux/slab.h>
#include <linux/irqchip/arm-gic.h>
#define IRQ_FREE -1
#define IRQ_RESERVED -2
+#define IRQ_SKIP -3
#define GIC_IRQ_START 32
/*
@@ -34,6 +36,16 @@ struct crossbar_device {
void (*write) (int, int);
};
+/**
+ * struct crossbar_data: Platform specific data
+ * @irqs_unused: array of irqs that cannot be used because of hw erratas
+ * @size: size of the irqs_unused array
+ */
+struct crossbar_data {
+ const uint *irqs_unused;
+ const uint size;
+};
+
static struct crossbar_device *cb;
static inline void crossbar_writel(int irq_no, int cb_no)
@@ -119,10 +131,12 @@ const struct irq_domain_ops routable_irq_domain_ops = {
.xlate = crossbar_domain_xlate
};
-static int __init crossbar_of_init(struct device_node *node)
+static int __init crossbar_of_init(struct device_node *node,
+ const struct crossbar_data *data)
{
int i, size, max, reserved = 0, entry;
const __be32 *irqsr;
+ const int *irqsk = NULL;
cb = kzalloc(sizeof(*cb), GFP_KERNEL);
@@ -194,6 +208,22 @@ static int __init crossbar_of_init(struct device_node *node)
reserved += size;
}
+ /* Skip the ones marked as unused */
+ if (data) {
+ irqsk = data->irqs_unused;
+ size = data->size;
+
+ for (i = 0; i < size; i++) {
+ entry = irqsk[i];
+
+ if (entry > max) {
+ pr_err("Invalid skip entry\n");
+ goto err3;
+ }
+ cb->irq_map[entry] = IRQ_SKIP;
+ }
+ }
+
register_routable_domain_ops(&routable_irq_domain_ops);
return 0;
@@ -208,18 +238,27 @@ err1:
return -ENOMEM;
}
+/* irq number 10 cannot be used because of hw bug */
+int dra_irqs_unused[] = { 10 };
+struct crossbar_data cb_dra_data = { dra_irqs_unused,
+ ARRAY_SIZE(dra_irqs_unused) };
+
static const struct of_device_id crossbar_match[] __initconst = {
- { .compatible = "ti,irq-crossbar" },
+ { .compatible = "ti,irq-crossbar", .data = &cb_dra_data },
{}
};
int __init irqcrossbar_init(void)
{
struct device_node *np;
- np = of_find_matching_node(NULL, crossbar_match);
+ const struct of_device_id *of_id;
+ const struct crossbar_data *cdata;
+
+ np = of_find_matching_node_and_match(NULL, crossbar_match, &of_id);
if (!np)
return -ENODEV;
- crossbar_of_init(np);
+ cdata = of_id->data;
+ crossbar_of_init(np, cdata);
return 0;
}
--
1.7.9.5
next prev parent reply other threads:[~2014-05-05 14:20 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-05 14:18 [PATCH 0/5] irqchip/dra7: crossbar bug fixes Sricharan R
2014-05-05 14:18 ` [PATCH 1/5] irqchip: crossbar: dont use '0' to mark reserved interrupts Sricharan R
2014-05-05 14:18 ` [PATCH 2/5] irqchip: crossbar: check for premapped crossbar before allocating Sricharan R
2014-05-05 14:18 ` Sricharan R [this message]
2014-05-08 19:24 ` [PATCH 3/5] irqchip: crossbar: Skip some irqs from getting mapped to crossbar Joel Fernandes
2014-05-08 20:37 ` Nishanth Menon
2014-05-08 22:43 ` Joel Fernandes
2014-05-08 23:05 ` Santosh Shilimkar
2014-05-09 0:13 ` Joel Fernandes
2014-05-09 0:25 ` Santosh Shilimkar
2014-05-09 4:22 ` Joel Fernandes
2014-05-09 12:54 ` Nishanth Menon
2014-05-09 13:27 ` Santosh Shilimkar
2014-05-09 13:36 ` Nishanth Menon
2014-05-09 13:45 ` Santosh Shilimkar
2014-05-09 14:00 ` Nishanth Menon
2014-05-09 14:13 ` Joel Fernandes
2014-05-09 20:41 ` Santosh Shilimkar
2014-05-09 13:43 ` Joel Fernandes
2014-05-09 13:36 ` Joel Fernandes
2014-05-09 13:37 ` Joel Fernandes
2014-05-09 13:38 ` Nishanth Menon
2014-05-05 14:18 ` [PATCH 4/5] irqchip: crossbar: Initialise the crossbar with a safe value Sricharan R
2014-05-05 14:18 ` [PATCH 5/5] irqchip: crossbar: Change allocation logic by reversing search for free irqs Sricharan R
2014-05-05 18:10 ` [PATCH 0/5] irqchip/dra7: crossbar bug fixes Darren Etheridge
2014-05-06 0:48 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1399299527-10955-4-git-send-email-r.sricharan@ti.com \
--to=r.sricharan@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=rnayak@ti.com \
--cc=santosh.shilimkar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).