From: Andreas Fenkart <afenkart@gmail.com>
To: Tony Lindgren <tony@atomide.com>
Cc: "Chris Ball" <chris@printf.net>,
"Grant Likely" <grant.likely@secretlab.ca>,
"Felipe Balbi" <balbi@ti.com>, "Balaji T K" <balajitk@ti.com>,
"Andreas Müller" <schnitzeltony@googlemail.com>,
zonque@gmail.com, galak@codeaurora.org,
linux-doc@vger.kernel.org, linux-mmc@vger.kernel.org,
linux-omap@vger.kernel.org,
"Andreas Fenkart" <afenkart@gmail.com>
Subject: [PATCH v11 0/7] mmc: omap_hsmmc: Enable SDIO IRQ.
Date: Fri, 9 May 2014 01:16:51 +0200 [thread overview]
Message-ID: <1399591018-12930-1-git-send-email-afenkart@gmail.com> (raw)
Hi Balaji, Tony, all
v11
- split !CONFIG_OF compile break into separate patch
- enable IWE/CLKEXTFREE in CON/HCTL register needed for omap4
- '&' vs '&&' in omap_hsmmc_resume, 1/5 (Andreas Müller)
- #define DLEV_DAT instead of BIT(21) 2/5 (Balaji)
- pinctrl_pm_select_default_state() removed, 4/5 (Balaji)
- drop _irqsave/_irqrestore from omap_hsmmc_wake_irq handler since it
can't be preempted by same priority omap_hsmmc_irq handler 1/5(Joel Fernandes)
- replace devres_open_group by explicit devm_free calls 1/5 (Balaji)
- disable_irq_nosync wake_irq since we handle it thread safe 1/5 (Balaji)
- drop 'gpio_dat1' pinctrl states and rework documentation 5/5 (Balaji)
v10
- bug fix on multi-core, untested
- incorporated changes from Balaji
- use devres / RAII mechanism to configure wake_up /
sdio irq capabilities
- drop pinctrl state 'active'
rely on driver-model states 'default', 'idle'
- add specific 'gpio_dat1' state for am335x SWAKEUP hack
- reorganized patches; +1 patch multi-core bugfix / +1 for pinctrl
- rebased 455c6fdbd21916 / cherry-picks from mmc-next
v9
- extended comment about why wake-irq is needed
- drop double '(' ')' around card_detect_irq
- drop final '.' in in subject line of patch
v8
- rebased on top of Tony Lindgren<tony@atomide.com> changes
- improved changelog describing the earlier work
- improved wakeup irq setup
- works for am3730 es platform now
- my changes on top:
- compile tested with #undef CONFIG_OF
- disable wake_irq in handler to prevent infinite loop
- fixed typo and added comment about wake-irq
v7
- rebase on 3.14.0-rc3-49726-g77e15ec
- split omap_hsmmc_pin_init due to regression on omap-3730 platform
v6
- rebase on Linux 3.13-rc3
- reformatting debugfs
v5
- fix compile error introduced by last minute one line fix
v4:
- switch to interrupts-extended format
- drop ti,swakeup-missing flag convert to comaptible section
v3:
- removed gpio_irq from platform_data
v2:
- incorparated changes as suggested by reviewers
- simplified workaround for am335x, gpio will now only wake
the module from runtime suspend, not handle the sdio irq
itself
Andreas Fenkart (6):
mmc: omap_hsmmc: compile fix for !CONFIG_OF build
mmc: omap_hsmmc: Enable SDIO interrupt
mmc: omap_hsmmc: Extend debugfs by SDIO IRQ handling, runtime state
mmc: omap_hsmmc: abort runtime suspend if pending sdio irq detected
mmc: omap_hsmmc: switch default/idle pinctrl states in runtime hooks
mmc: omap_hsmmc: Pin remux workaround to support SDIO interrupt on
AM335x
Balaji T K (1):
mmc: omap_hsmmc: enable wakeup event for sdio OMAP4
.../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 53 ++++
drivers/mmc/host/omap_hsmmc.c | 283 ++++++++++++++++++--
include/linux/platform_data/mmc-omap.h | 1 +
3 files changed, 316 insertions(+), 21 deletions(-)
--
1.7.10.4
next reply other threads:[~2014-05-08 23:16 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-08 23:16 Andreas Fenkart [this message]
2014-05-08 23:20 ` [PATCH v11 1/7] mmc: omap_hsmmc: compile fix for !CONFIG_OF build Andreas Fenkart
2014-05-08 23:20 ` [PATCH v11 2/7] mmc: omap_hsmmc: Enable SDIO interrupt Andreas Fenkart
2014-05-09 17:09 ` Balaji T K
2014-05-08 23:20 ` [PATCH v11 3/7] mmc: omap_hsmmc: enable wakeup event for sdio OMAP4 Andreas Fenkart
2014-05-08 23:20 ` [PATCH v11 4/7] mmc: omap_hsmmc: Extend debugfs by SDIO IRQ handling, runtime state Andreas Fenkart
2014-05-09 17:10 ` Balaji T K
2014-05-08 23:20 ` [PATCH v11 5/7] mmc: omap_hsmmc: abort runtime suspend if pending sdio irq detected Andreas Fenkart
2014-05-09 17:10 ` Balaji T K
2014-05-08 23:20 ` [PATCH v11 6/7] mmc: omap_hsmmc: switch default/idle pinctrl states in runtime hooks Andreas Fenkart
2014-05-09 17:11 ` Balaji T K
2014-05-08 23:20 ` [PATCH v11 7/7] mmc: omap_hsmmc: Pin remux workaround to support SDIO interrupt on AM335x Andreas Fenkart
2014-05-09 17:11 ` Balaji T K
2014-05-08 23:48 ` [PATCH v11 1/7] mmc: omap_hsmmc: compile fix for !CONFIG_OF build Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1399591018-12930-1-git-send-email-afenkart@gmail.com \
--to=afenkart@gmail.com \
--cc=balajitk@ti.com \
--cc=balbi@ti.com \
--cc=chris@printf.net \
--cc=galak@codeaurora.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-doc@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=schnitzeltony@googlemail.com \
--cc=tony@atomide.com \
--cc=zonque@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).