From: Pekon Gupta <pekon@ti.com>
To: Tony Lindgren <tony@atomide.com>
Cc: linux-omap <linux-omap@vger.kernel.org>,
Javier Martinez Canillas <javier@dowhile0.org>,
Roger Quadros <rogerq@ti.com>,
Ezequiel Garcia <ezequiel.garcia@free-electrons.com>,
Pekon Gupta <pekon@ti.com>
Subject: [PATCH v6 0/4] add parallel NAND support for TI's new OMAPx and AMxx platforms (Part-2)
Date: Fri, 16 May 2014 16:33:46 +0530 [thread overview]
Message-ID: <1400238230-26357-1-git-send-email-pekon@ti.com> (raw)
*changes v5 -> v6*
- removed explicit disabling of GPMC and ELM in am335x-bone-memorycape.dts
as both modules are already disabled by default in am33xx.dtsi
- fixed comments for <range> and <reg> properties. keeping it consistent
across platforms.
- fixed <reg size> property. Using 'exact' register space as in hardware.
- fixed DT properties for wait-pin monitoring. Added gpmc,wait-pin = <>
- using lower-case letter for hex digits
Rebased on git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap :omap-for-v3.16/dt
*changes v4 -> v5*
use lower-case hexadecimal numbers
add comments for using different memory sizes in <range> and <reg> properties
fix 'reg size' property for GPMC and ELM nodes in dra7.dtsi
*changes v3 -> v4*
fixed <reg> and <range> property for all GPMC DT nodes
added fix for am335x-evm and am437x-epos-evm
rebased on git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap +omap-for-v3.16/dt
*changes v2 -> v3*
rebased on git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap :master
merged leftover patches (dra7-evm and am43x-epos-evm fix) from Part-1 series
*changes v1 -> v2*
[PATCH v2 1/2] created new DTS for memory-capes based on following feedbacks
http://www.spinics.net/lists/linux-omap/msg104348.html from 'Nishanth Menon <nm@ti.com>'
http://www.spinics.net/lists/linux-omap/msg104447.html from 'Tony Lindgren <tony@atomide.com>'
[PATCH v2 2/2] <same as [PATCH v1 1/3]>
*original v1*
This patch-set adds parallel NAND support on following TI platforms
- AM335x (am335x-bone LT, am335x-boneblack): <disabled by default>
- AM43xx (am437x-gp-evm)
Minal Shah (1):
ARM: dts: dra7: add support for parallel NAND flash
Pekon Gupta (3):
ARM: dts: am335x-bone: add support for beaglebone NAND cape
ARM: dts: am437x-gp-evm: add support for parallel NAND flash
ARM: dts: am43xx: fix starting offset of NAND.filesystem MTD partition
arch/arm/boot/dts/am335x-bone-memory-cape.dts | 123 ++++++++++++++++++++++++++
arch/arm/boot/dts/am335x-bone.dts | 1 +
arch/arm/boot/dts/am335x-boneblack.dts | 1 +
arch/arm/boot/dts/am437x-gp-evm.dts | 108 ++++++++++++++++++++++
arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
arch/arm/boot/dts/dra7-evm.dts | 118 ++++++++++++++++++++++++
arch/arm/boot/dts/dra7.dtsi | 20 +++++
7 files changed, 372 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/am335x-bone-memory-cape.dts
--
1.8.5.1.163.gd7aced9
next reply other threads:[~2014-05-16 11:04 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-16 11:03 Pekon Gupta [this message]
2014-05-16 11:03 ` [PATCH v6 1/4] ARM: dts: am335x-bone: add support for beaglebone NAND cape Pekon Gupta
2014-05-16 11:57 ` Ezequiel Garcia
2014-05-16 14:06 ` Gupta, Pekon
2014-05-16 17:34 ` Javier Martinez Canillas
2014-05-16 11:03 ` [PATCH v6 2/4] ARM: dts: am437x-gp-evm: add support for parallel NAND flash Pekon Gupta
2014-05-16 12:22 ` Roger Quadros
2014-05-16 13:58 ` Gupta, Pekon
2014-05-16 14:26 ` Roger Quadros
2014-05-16 16:20 ` Tony Lindgren
2014-05-16 18:52 ` Gupta, Pekon
2014-05-16 20:29 ` Roger Quadros
2014-05-16 21:01 ` Tony Lindgren
2014-05-16 11:03 ` [PATCH v6 3/4] ARM: dts: dra7: " Pekon Gupta
2014-05-16 11:03 ` [PATCH v6 4/4] ARM: dts: am43xx: fix starting offset of NAND.filesystem MTD partition Pekon Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400238230-26357-1-git-send-email-pekon@ti.com \
--to=pekon@ti.com \
--cc=ezequiel.garcia@free-electrons.com \
--cc=javier@dowhile0.org \
--cc=linux-omap@vger.kernel.org \
--cc=rogerq@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox