From: George Cherian <george.cherian@ti.com>
To: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
linux-omap@vger.kernel.org
Cc: gregkh@linuxfoundation.org, balbi@ti.com, zonque@gmail.com,
b-liu@ti.com, George Cherian <george.cherian@ti.com>
Subject: [PATCH v6 4/5] usb: musb: core: Convert the musb_platform_reset to have a return value.
Date: Mon, 26 May 2014 14:50:11 +0530 [thread overview]
Message-ID: <1401096012-6895-5-git-send-email-george.cherian@ti.com> (raw)
In-Reply-To: <1401096012-6895-1-git-send-email-george.cherian@ti.com>
Currently musb_platform_reset() is only used by dsps.
In case of BABBLE interrupt for other platforms the musb_platform_reset()
is a NOP. In such situations no need to re-initialize the endpoints.
Also in the latest silicon revision of AM335x, we do have a babble recovery
mechanism without resetting the IP block. In preperation to add that support
its better to have a rest_done return for musb_platform_reset().
Signed-off-by: George Cherian <george.cherian@ti.com>
---
drivers/usb/musb/musb_core.c | 10 ++++++----
drivers/usb/musb/musb_core.h | 10 ++++++----
drivers/usb/musb/musb_dsps.c | 3 ++-
3 files changed, 14 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index c0ce09f..b841ee0 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1753,9 +1753,11 @@ static void musb_irq_work(struct work_struct *data)
static void musb_recover_work(struct work_struct *data)
{
struct musb *musb = container_of(data, struct musb, recover_work.work);
- int status;
+ int status, ret;
- musb_platform_reset(musb);
+ ret = musb_platform_reset(musb);
+ if (ret)
+ return;
usb_phy_vbus_off(musb->xceiv);
usleep_range(100, 200);
@@ -1764,8 +1766,8 @@ static void musb_recover_work(struct work_struct *data)
usleep_range(100, 200);
/*
- * When a babble condition occurs, the musb controller removes the
- * session bit and the endpoint config is lost.
+ * When a babble condition occurs, the musb controller
+ * removes the session bit and the endpoint config is lost.
*/
if (musb->dyn_fifo)
status = ep_config_from_table(musb);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 9241025..414e57a 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -192,7 +192,7 @@ struct musb_platform_ops {
int (*set_mode)(struct musb *musb, u8 mode);
void (*try_idle)(struct musb *musb, unsigned long timeout);
- void (*reset)(struct musb *musb);
+ int (*reset)(struct musb *musb);
int (*vbus_status)(struct musb *musb);
void (*set_vbus)(struct musb *musb, int on);
@@ -555,10 +555,12 @@ static inline void musb_platform_try_idle(struct musb *musb,
musb->ops->try_idle(musb, timeout);
}
-static inline void musb_platform_reset(struct musb *musb)
+static inline int musb_platform_reset(struct musb *musb)
{
- if (musb->ops->reset)
- musb->ops->reset(musb);
+ if (!musb->ops->reset)
+ return -EINVAL;
+
+ return musb->ops->reset(musb);
}
static inline int musb_platform_get_vbus_status(struct musb *musb)
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 74c4193..f6f3087 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -536,7 +536,7 @@ static int dsps_musb_set_mode(struct musb *musb, u8 mode)
return 0;
}
-static void dsps_musb_reset(struct musb *musb)
+static int dsps_musb_reset(struct musb *musb)
{
struct device *dev = musb->controller;
struct dsps_glue *glue = dev_get_drvdata(dev->parent);
@@ -548,6 +548,7 @@ static void dsps_musb_reset(struct musb *musb)
usleep_range(100, 200);
usb_phy_init(musb->xceiv);
+ return 0;
}
static struct musb_platform_ops dsps_ops = {
--
1.8.3.1
next prev parent reply other threads:[~2014-05-26 9:20 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-26 9:20 [PATCH v6 0/5] Add support for SW babble Control George Cherian
2014-05-26 9:20 ` [PATCH v6 1/5] usb: musb: core: Handle Babble condition only in HOST mode George Cherian
2014-06-19 10:44 ` Tony Lindgren
2014-06-19 16:01 ` Felipe Balbi
2014-05-26 9:20 ` [PATCH v6 2/5] usb: musb: core: Convert babble recover work to delayed work George Cherian
2014-05-26 9:20 ` [PATCH v6 3/5] usb: musb: dsps: Call usb_phy(_shutdown/_init) during musb_platform_reset() George Cherian
2014-05-26 9:20 ` George Cherian [this message]
2014-05-26 9:20 ` [PATCH v6 5/5] usb: musb: dsps: Add the sw_babble_control() and Enable for newer silicon George Cherian
2014-06-03 19:00 ` [PATCH v6 0/5] Add support for SW babble Control Bin Liu
2014-06-30 17:30 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401096012-6895-5-git-send-email-george.cherian@ti.com \
--to=george.cherian@ti.com \
--cc=b-liu@ti.com \
--cc=balbi@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=zonque@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).