From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tero Kristo Subject: [PATCH 4/5] ARM: OMAP3: clock: add support for dpll4_set_rate_and_parent Date: Fri, 3 Oct 2014 16:57:13 +0300 Message-ID: <1412344634-2798-5-git-send-email-t-kristo@ti.com> References: <1412344634-2798-1-git-send-email-t-kristo@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Received: from devils.ext.ti.com ([198.47.26.153]:52952 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752469AbaJCN55 (ORCPT ); Fri, 3 Oct 2014 09:57:57 -0400 In-Reply-To: <1412344634-2798-1-git-send-email-t-kristo@ti.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-omap@vger.kernel.org, tony@atomide.com, mturquette@linaro.org, paul@pwsan.com Cc: linux-arm-kernel@lists.infradead.org Expand the support of omap4 per-dpll to provide set_rate_and_parent. This is required for proper behavior of clk_change_rate with determine_rate support. Signed-off-by: Tero Kristo --- arch/arm/mach-omap2/clock3xxx.c | 36 ++++++++++++++++++++++++++++++++++++ include/linux/clk/ti.h | 2 ++ 2 files changed, 38 insertions(+) diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c index 9a25601..a9e86db 100644 --- a/arch/arm/mach-omap2/clock3xxx.c +++ b/arch/arm/mach-omap2/clock3xxx.c @@ -38,6 +38,18 @@ /* needed by omap3_core_dpll_m2_set_rate() */ struct clk *sdrc_ick_p, *arm_fck_p; + +/** + * omap3_dpll4_set_rate - set rate for omap3 per-dpll + * @hw: clock to change + * @rate: target rate for clock + * @parent_rate: rate of the parent clock + * + * Check if the current SoC supports the per-dpll reprogram operation + * or not, and then do the rate change if supported. Returns -EINVAL + * if not supported, 0 for success, and potential error codes from the + * clock rate change. + */ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { @@ -54,6 +66,30 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate, return omap3_noncore_dpll_set_rate(hw, rate, parent_rate); } +/** + * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll + * @hw: clock to change + * @rate: target rate for clock + * @parent_rate: rate of the parent clock + * @index: parent index, 0 - reference clock, 1 - bypass clock + * + * Check if the current SoC support the per-dpll reprogram operation + * or not, and then do the rate + parent change if supported. Returns + * -EINVAL if not supported, 0 for success, and potential error codes + * from the clock rate change. + */ +int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate, u8 index) +{ + if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) { + pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n"); + return -EINVAL; + } + + return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate, + index); +} + void __init omap3_clk_lock_dpll5(void) { struct clk *dpll5_clk; diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 541dc33..57242ba 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -291,6 +291,8 @@ int omap2_clk_disable_autoidle_all(void); void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks); int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate, unsigned long parent_rate); +int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate, u8 index); int omap2_dflt_clk_enable(struct clk_hw *hw); void omap2_dflt_clk_disable(struct clk_hw *hw); int omap2_dflt_clk_is_enabled(struct clk_hw *hw); -- 1.7.9.5