From mboxrd@z Thu Jan 1 00:00:00 1970 From: Felipe Balbi Subject: [PATCH 3/3] arm: boot: dts: am437x-sk: fix lcd enable pin mux data Date: Tue, 14 Oct 2014 13:28:55 -0500 Message-ID: <1413311335-25083-3-git-send-email-balbi@ti.com> References: <1413311335-25083-1-git-send-email-balbi@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Received: from arroyo.ext.ti.com ([192.94.94.40]:46846 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753601AbaJNS33 (ORCPT ); Tue, 14 Oct 2014 14:29:29 -0400 In-Reply-To: <1413311335-25083-1-git-send-email-balbi@ti.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Tomi Valkeinen Cc: Linux OMAP Mailing List , Tony Lindgren , Benoit Cousson , Linux ARM Kernel Mailing List , linux-fbdev@vger.kernel.org, Darren Etheridge , Felipe Balbi Caused by a copy & paste error. Note that even with this bug AM437x SK display still works because GPIO mux mode is always enabled. It's still wrong to mux somebody else's pin. Luckily ball D25 (offset 0x238 - gpio5_8) on AM437x isn't used for anything. Signed-off-by: Felipe Balbi --- arch/arm/boot/dts/am437x-sk-evm.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 859ff3d..681be00 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -320,8 +320,7 @@ lcd_pins: lcd_pins { pinctrl-single,pins = < - /* GPIO 5_8 to select LCD / HDMI */ - 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) + 0x1c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpcm_ad7.gpio1_7 */ >; }; }; -- 2.1.0.GIT