From mboxrd@z Thu Jan 1 00:00:00 1970 From: Felipe Balbi Subject: [PATCH 0/4] extcon: gpio: add DT support Date: Mon, 3 Nov 2014 10:32:26 -0600 Message-ID: <1415032350-8459-1-git-send-email-balbi@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Received: from bear.ext.ti.com ([192.94.94.41]:43753 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751908AbaKCQdE (ORCPT ); Mon, 3 Nov 2014 11:33:04 -0500 Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: myungjoo.ham@samsung.com, cw00.choi@samsung.com Cc: Linux Kernel Mailing List , Linux OMAP Mailing List , nsekhar@ti.com, grant.likely@linaro.org, Felipe Balbi Hi, this series has been tested with v3.18-rc2 with a yet-to-be-released board (called X15). That board is DT-only and we use extcon-gpio to decide which USB mode should be used (host or peripheral). George Cherian (4): extcon: gpio: Convert the driver to use gpio desc API's extcon: gpio: Add dt support for the driver. extcon: gpio: Always use gpio_get_value_cansleep extcon: gpio: Add support for using cable names .../devicetree/bindings/extcon/extcon-gpio.txt | 23 ++++++ drivers/extcon/extcon-gpio.c | 93 ++++++++++++++-------- 2 files changed, 84 insertions(+), 32 deletions(-) create mode 100644 Documentation/devicetree/bindings/extcon/extcon-gpio.txt -- 2.1.0.GIT