linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Felipe Balbi <balbi@ti.com>
To: myungjoo.ham@samsung.com, cw00.choi@samsung.com
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Linux OMAP Mailing List <linux-omap@vger.kernel.org>,
	nsekhar@ti.com, grant.likely@linaro.org,
	George Cherian <george.cherian@ti.com>
Subject: [PATCH 4/4] extcon: gpio: Add support for using cable names
Date: Mon, 3 Nov 2014 10:32:30 -0600	[thread overview]
Message-ID: <1415032350-8459-5-git-send-email-balbi@ti.com> (raw)
In-Reply-To: <1415032350-8459-1-git-send-email-balbi@ti.com>

From: George Cherian <george.cherian@ti.com>

Add support for using cable names. Enables other drivers to register interest
and get notified using extcon provided notifier call backs.

Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
 Documentation/devicetree/bindings/extcon/extcon-gpio.txt | 2 ++
 drivers/extcon/extcon-gpio.c                             | 4 ++++
 2 files changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/extcon/extcon-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
index 5fe6846..f19aeb4 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
@@ -7,6 +7,7 @@ Required Properties:
  - compatible: should be:
    * "linux,extcon-gpio"
  - gpios: specifies the gpio pin used.
+ - cable-name: Name of the cable used.
 
 Optional Properties:
  - debounce: Debounce time for GPIO IRQ in ms
@@ -18,4 +19,5 @@ Eg:
 		compatible = "linux,extcon-gpio";
 		gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
 		debounce = <20>;
+		cable-name = "USB-HOST";
 	};
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index 7191d28..cbe35af 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -42,6 +42,7 @@ struct gpio_extcon_data {
 	struct delayed_work work;
 	unsigned long debounce_jiffies;
 	bool check_on_resume;
+	const char *cable_name[1];
 };
 
 static void gpio_extcon_work(struct work_struct *work)
@@ -112,6 +113,9 @@ static int gpio_extcon_probe(struct platform_device *pdev)
 		of_property_read_u32(np, "debounce", &debounce);
 		irq = gpiod_to_irq(extcon_data->gpiod);
 		irq_flags = irq_get_trigger_type(irq);
+		of_property_read_string_index(np, "cable-name", 0,
+					      extcon_data->cable_name);
+		extcon_data->edev->supported_cable = extcon_data->cable_name;
 	} else {
 		if (!pdata)
 			return -EBUSY;
-- 
2.1.0.GIT


  parent reply	other threads:[~2014-11-03 16:33 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-03 16:32 [PATCH 0/4] extcon: gpio: add DT support Felipe Balbi
2014-11-03 16:32 ` [PATCH 1/4] extcon: gpio: Convert the driver to use gpio desc API's Felipe Balbi
2014-11-03 18:01   ` Guenter Roeck
2014-11-03 18:06     ` Felipe Balbi
2014-11-03 18:51       ` Guenter Roeck
2014-11-03 20:43         ` Felipe Balbi
     [not found] ` <1415032350-8459-1-git-send-email-balbi-l0cyMroinI0@public.gmane.org>
2014-11-03 16:32   ` [PATCH 2/4] extcon: gpio: Add dt support for the driver Felipe Balbi
2014-11-03 16:32 ` [PATCH 3/4] extcon: gpio: Always use gpio_get_value_cansleep Felipe Balbi
2014-11-03 16:32 ` Felipe Balbi [this message]
2014-11-03 16:39   ` [PATCH 4/4] extcon: gpio: Add support for using cable names Felipe Balbi
2014-11-04  6:12 ` [PATCH 0/4] extcon: gpio: add DT support George Cherian
2014-11-04 14:41   ` Felipe Balbi
2014-11-05 15:25     ` George Cherian
2014-11-05 18:28       ` Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1415032350-8459-5-git-send-email-balbi@ti.com \
    --to=balbi@ti.com \
    --cc=cw00.choi@samsung.com \
    --cc=george.cherian@ti.com \
    --cc=grant.likely@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=myungjoo.ham@samsung.com \
    --cc=nsekhar@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).