From: Marc Kleine-Budde <mkl@pengutronix.de>
To: linux-can@vger.kernel.org
Cc: wsa@the-dreams.de, linux-omap@vger.kernel.org, rogerq@ti.com,
kernel@pengutronix.de, Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [PATCH v8 2/8] can: c_can: Introduce c_can_driver_data structure
Date: Fri, 14 Nov 2014 19:09:45 +0100 [thread overview]
Message-ID: <1415988591-6032-3-git-send-email-mkl@pengutronix.de> (raw)
In-Reply-To: <1415988591-6032-1-git-send-email-mkl@pengutronix.de>
From: Roger Quadros <rogerq@ti.com>
We want to have more data than just can_dev_id to be present
in the driver data e.g. TI platforms need RAMINIT register
description. Introduce the c_can_driver_data structure and move
the can_dev_id into it.
Tidy up the way it is used on probe().
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
drivers/net/can/c_can/c_can.h | 4 +++
drivers/net/can/c_can/c_can_platform.c | 52 +++++++++++++++++++---------------
2 files changed, 33 insertions(+), 23 deletions(-)
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index 99ad1aa576b0..26c975d914e3 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -169,6 +169,10 @@ enum c_can_dev_id {
BOSCH_D_CAN,
};
+struct c_can_driver_data {
+ enum c_can_dev_id id;
+};
+
/* c_can private data structure */
struct c_can_priv {
struct can_priv can; /* must be the first member */
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index 106c203fc5eb..44c293926f78 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -168,26 +168,34 @@ static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable)
}
}
+static const struct c_can_driver_data c_can_drvdata = {
+ .id = BOSCH_C_CAN,
+};
+
+static const struct c_can_driver_data d_can_drvdata = {
+ .id = BOSCH_D_CAN,
+};
+
static struct platform_device_id c_can_id_table[] = {
- [BOSCH_C_CAN_PLATFORM] = {
+ {
.name = KBUILD_MODNAME,
- .driver_data = BOSCH_C_CAN,
+ .driver_data = (kernel_ulong_t)&c_can_drvdata,
},
- [BOSCH_C_CAN] = {
+ {
.name = "c_can",
- .driver_data = BOSCH_C_CAN,
+ .driver_data = (kernel_ulong_t)&c_can_drvdata,
},
- [BOSCH_D_CAN] = {
+ {
.name = "d_can",
- .driver_data = BOSCH_D_CAN,
- }, {
- }
+ .driver_data = (kernel_ulong_t)&d_can_drvdata,
+ },
+ { /* sentinel */ },
};
MODULE_DEVICE_TABLE(platform, c_can_id_table);
static const struct of_device_id c_can_of_table[] = {
- { .compatible = "bosch,c_can", .data = &c_can_id_table[BOSCH_C_CAN] },
- { .compatible = "bosch,d_can", .data = &c_can_id_table[BOSCH_D_CAN] },
+ { .compatible = "bosch,c_can", .data = &c_can_drvdata },
+ { .compatible = "bosch,d_can", .data = &d_can_drvdata },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, c_can_of_table);
@@ -199,21 +207,19 @@ static int c_can_plat_probe(struct platform_device *pdev)
struct net_device *dev;
struct c_can_priv *priv;
const struct of_device_id *match;
- const struct platform_device_id *id;
struct resource *mem, *res;
int irq;
struct clk *clk;
-
- if (pdev->dev.of_node) {
- match = of_match_device(c_can_of_table, &pdev->dev);
- if (!match) {
- dev_err(&pdev->dev, "Failed to find matching dt id\n");
- ret = -EINVAL;
- goto exit;
- }
- id = match->data;
+ const struct c_can_driver_data *drvdata;
+
+ match = of_match_device(c_can_of_table, &pdev->dev);
+ if (match) {
+ drvdata = match->data;
+ } else if (pdev->id_entry->driver_data) {
+ drvdata = (struct c_can_driver_data *)
+ platform_get_device_id(pdev)->driver_data;
} else {
- id = platform_get_device_id(pdev);
+ return -ENODEV;
}
/* get the appropriate clk */
@@ -245,7 +251,7 @@ static int c_can_plat_probe(struct platform_device *pdev)
}
priv = netdev_priv(dev);
- switch (id->driver_data) {
+ switch (drvdata->id) {
case BOSCH_C_CAN:
priv->regs = reg_map_c_can;
switch (mem->flags & IORESOURCE_MEM_TYPE_MASK) {
@@ -304,7 +310,7 @@ static int c_can_plat_probe(struct platform_device *pdev)
priv->device = &pdev->dev;
priv->can.clock.freq = clk_get_rate(clk);
priv->priv = clk;
- priv->type = id->driver_data;
+ priv->type = drvdata->id;
platform_set_drvdata(pdev, dev);
SET_NETDEV_DEV(dev, &pdev->dev);
--
2.1.1
next prev parent reply other threads:[~2014-11-14 18:09 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-14 18:09 [PATCH v8 0/8] can: c_can: Use syscon regmap for TI specific RAMINIT register Marc Kleine-Budde
2014-11-14 18:09 ` [PATCH v8 1/8] can: c_can: Add timeout to c_can_hw_raminit_ti() Marc Kleine-Budde
2014-11-14 18:09 ` Marc Kleine-Budde [this message]
2014-11-14 18:09 ` [PATCH v8 3/8] can: c_can: Add RAMINIT register information to driver data Marc Kleine-Budde
2014-11-14 18:09 ` [PATCH v8 4/8] can: c_can: Add syscon/regmap RAMINIT mechanism Marc Kleine-Budde
2015-01-05 9:18 ` Tomi Valkeinen
2015-01-07 9:56 ` Roger Quadros
2014-11-14 18:09 ` [PATCH v8 5/8] can: c_can: Add support for START pulse in RAMINIT sequence Marc Kleine-Budde
2014-11-14 18:09 ` [PATCH v8 6/8] can: c_can: Disable pins when CAN interface is down Marc Kleine-Budde
2014-11-14 18:09 ` [PATCH v8 7/8] can: c_can: Add support for TI DRA7 DCAN Marc Kleine-Budde
2014-11-14 18:09 ` [PATCH v8 8/8] can: c_can: Add support for TI am3352 DCAN Marc Kleine-Budde
2014-11-17 12:07 ` [PATCH v8 0/8] can: c_can: Use syscon regmap for TI specific RAMINIT register Roger Quadros
2014-11-17 12:09 ` [PATCH v8 9/9] net: can: c_can: Add support for TI am4372 DCAN Roger Quadros
2014-11-17 12:12 ` Marc Kleine-Budde
2014-11-17 12:31 ` Roger Quadros
2014-11-17 14:19 ` Roger Quadros
2014-11-17 14:31 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415988591-6032-3-git-send-email-mkl@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=kernel@pengutronix.de \
--cc=linux-can@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=rogerq@ti.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).