From mboxrd@z Thu Jan 1 00:00:00 1970 From: Felipe Balbi Subject: [PATCH] net: ethernet: cpsw: ignore VLAN ID 1 Date: Tue, 6 Jan 2015 11:43:32 -0600 Message-ID: <1420566212-30081-1-git-send-email-balbi@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: netdev-owner@vger.kernel.org To: David Miller Cc: netdev@vger.kernel.org, Linux OMAP Mailing List , Felipe Balbi , stable@vger.kernel.org, Mugunthan V N List-Id: linux-omap@vger.kernel.org CPSW completely hangs if we add, and later remove, VLAN ID #1. What happens is that after removing VLAN ID #1, no packets will be received by CPSW rendering network unusable. In order to "fix" the issue, we're returning -EINVAL if anybody tries to add VLAN ID #1. While at that, also filter out any ID > 4095 because we only have 12 bits for VLAN IDs. Fixes: 3b72c2f (drivers: net:ethernet: cpsw: add support for VLAN) Cc: # v3.9+ Cc: Mugunthan V N Tested-by: Schuyler Patton Signed-off-by: Felipe Balbi --- drivers/net/ethernet/ti/cpsw.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index e61ee8351272..028bb7f3de65 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1669,6 +1669,13 @@ static int cpsw_ndo_vlan_rx_add_vid(struct net_device *ndev, if (vid == priv->data.default_vlan) return 0; + /* NOTICE: CPSW does not support VID 1. We should + * also filter out VID > 4095 as we only have 12 + * bits for VID entries + */ + if (vid == 1 || vid >= VLAN_N_VID) + return -EINVAL; + dev_info(priv->dev, "Adding vlanid %d to vlan filter\n", vid); return cpsw_add_vlan_ale_entry(priv, vid); } @@ -1682,6 +1689,13 @@ static int cpsw_ndo_vlan_rx_kill_vid(struct net_device *ndev, if (vid == priv->data.default_vlan) return 0; + /* NOTICE: CPSW does not support VID 1. We should + * also filter out VID > 4095 as we only have 12 + * bits for VID entries + */ + if (vid == 1 || vid >= VLAN_N_VID) + return -EINVAL; + dev_info(priv->dev, "removing vlanid %d from vlan filter\n", vid); ret = cpsw_ale_del_vlan(priv->ale, vid, 0); if (ret != 0) -- 2.2.0