From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dave Gerlach Subject: [PATCH v4 3/3] ARM: dts: AM4372: Add the wkupm3 rproc node Date: Mon, 13 Jul 2015 12:34:55 -0500 Message-ID: <1436808895-21206-4-git-send-email-d-gerlach@ti.com> References: <1436808895-21206-1-git-send-email-d-gerlach@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1436808895-21206-1-git-send-email-d-gerlach@ti.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org Cc: Tony Lindgren , Dave Gerlach List-Id: linux-omap@vger.kernel.org From: Suman Anna Add the Wakeup M3 remote processor device node for the AM4372 SoC. The WkupM3 remote processor is used to implement and achieve low-power functionality on the AM33xx & AM43xx SoCs. This node is added as a child of the recently added l4_wkup node to reflect its presence within the SoC. Signed-off-by: Suman Anna Signed-off-by: Dave Gerlach --- arch/arm/boot/dts/am4372.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index ade28c79..6f6f393 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -83,6 +83,15 @@ #size-cells = <1>; ranges = <0 0x44c00000 0x287000>; + wkup_m3: wkup_m3@100000 { + compatible = "ti,am4372-wkup-m3"; + reg = <0x100000 0x4000>, + <0x180000 0x2000>; + reg-names = "umem", "dmem"; + ti,hwmods = "wkup_m3"; + ti,pm-firmware = "am335x-pm-firmware.elf"; + }; + prcm: prcm@1f0000 { compatible = "ti,am4-prcm"; reg = <0x1f0000 0x11000>; -- 2.4.5