From: Roger Quadros <rogerq@ti.com>
To: tony@atomide.com
Cc: dwmw2@infradead.org, computersforpeace@gmail.com,
ezequiel@vanguardiasur.com.ar, javier@dowhile0.org,
fcooper@ti.com, nsekhar@ti.com, linux-mtd@lists.infradead.org,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Roger Quadros <rogerq@ti.com>
Subject: [PATCH v2 08/22] memory: omap-gpmc: Add IRQ ops for GPMC-NAND interface
Date: Fri, 7 Aug 2015 12:12:18 +0300 [thread overview]
Message-ID: <1438938752-31010-9-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1438938752-31010-1-git-send-email-rogerq@ti.com>
Provide functions to enable/disable NAND IRQs, get
NAND event status and clear NAND events.
The NAND events of interest are TERMCOUNT and FIFOEVENT.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/memory/omap-gpmc.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++
include/linux/omap-gpmc.h | 4 ++++
2 files changed, 54 insertions(+)
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index e70a8df..713d7af 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -1078,8 +1078,58 @@ static bool gpmc_nand_writebuffer_empty(void)
return false;
}
+static int gpmc_nand_irq_enable(enum gpmc_nand_irq irq)
+{
+ u32 reg;
+
+ if (irq > GPMC_NAND_IRQ_TERMCOUNT)
+ return -EINVAL;
+
+ reg = gpmc_read_reg(GPMC_IRQENABLE);
+ reg |= BIT(irq);
+ gpmc_write_reg(GPMC_IRQENABLE, reg);
+
+ return 0;
+}
+
+static int gpmc_nand_irq_disable(enum gpmc_nand_irq irq)
+{
+ u32 reg;
+
+ if (irq > GPMC_NAND_IRQ_TERMCOUNT)
+ return -EINVAL;
+
+ reg = gpmc_read_reg(GPMC_IRQENABLE);
+ reg &= ~BIT(irq);
+ gpmc_write_reg(GPMC_IRQENABLE, reg);
+
+ return 0;
+}
+
+static void gpmc_nand_irq_clear(enum gpmc_nand_irq irq)
+{
+ if (irq > GPMC_NAND_IRQ_TERMCOUNT)
+ return;
+
+ /* setting bit to 1 clears the bit in IRQSTATUS */
+ gpmc_write_reg(GPMC_IRQSTATUS, BIT(irq));
+}
+
+static u32 gpmc_nand_irq_status(void)
+{
+ u32 reg = gpmc_read_reg(GPMC_IRQSTATUS);
+
+ /* Mask out non-NAND bits */
+ reg &= GPMC_IRQENABLE_FIFOEVENT | GPMC_IRQENABLE_TERMCOUNT;
+ return reg;
+}
+
static struct gpmc_nand_ops nand_ops = {
.nand_writebuffer_empty = gpmc_nand_writebuffer_empty,
+ .nand_irq_enable = gpmc_nand_irq_enable,
+ .nand_irq_disable = gpmc_nand_irq_disable,
+ .nand_irq_clear = gpmc_nand_irq_clear,
+ .nand_irq_status = gpmc_nand_irq_status,
};
/**
diff --git a/include/linux/omap-gpmc.h b/include/linux/omap-gpmc.h
index 44e322f..063a84f 100644
--- a/include/linux/omap-gpmc.h
+++ b/include/linux/omap-gpmc.h
@@ -11,6 +11,10 @@
#define GPMC_CONFIG_WP 0x00000005
+/* GPMC IRQENABLE/IRQSTATUS BIT defs */
+#define GPMC_IRQENABLE_FIFOEVENT BIT(0)
+#define GPMC_IRQENABLE_TERMCOUNT BIT(1)
+
enum gpmc_nand_irq {
GPMC_NAND_IRQ_FIFOEVENT = 0,
GPMC_NAND_IRQ_TERMCOUNT,
--
2.1.4
next prev parent reply other threads:[~2015-08-07 9:12 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-07 9:12 [PATCH v2 00/22] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms Roger Quadros
2015-08-07 9:12 ` [PATCH v2 01/22] ARM: OMAP2+: gpmc: Add platform data Roger Quadros
2015-08-07 9:12 ` [PATCH v2 02/22] ARM: OMAP2+: gpmc: Add gpmc timings and settings to " Roger Quadros
2015-08-07 9:12 ` [PATCH v2 03/22] memory: omap-gpmc: Introduce GPMC to NAND interface Roger Quadros
2015-08-07 9:12 ` [PATCH v2 04/22] mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers Roger Quadros
2015-08-07 9:12 ` [PATCH v2 05/22] memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status Roger Quadros
2015-08-07 9:12 ` [PATCH v2 06/22] mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty check Roger Quadros
2015-08-13 7:18 ` Roger Quadros
2015-08-07 9:12 ` [PATCH v2 07/22] memory: omap-gpmc: Remove NAND IRQ code Roger Quadros
2015-08-07 9:12 ` Roger Quadros [this message]
[not found] ` <1438938752-31010-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2015-08-07 9:12 ` [PATCH v2 09/22] mtd: nand: omap2: manage NAND interrupts Roger Quadros
2015-08-07 9:12 ` [PATCH v2 10/22] mtd: nand: omap: Copy platform data parameters to omap_nand_info data Roger Quadros
2015-08-07 9:12 ` [PATCH v2 11/22] mtd: nand: omap: Clean up device tree support Roger Quadros
2015-08-07 9:12 ` [PATCH v2 12/22] mtd: nand: omap: Update DT binding documentation Roger Quadros
2015-08-07 9:12 ` [PATCH v2 13/22] memory: omap-gpmc: Prevent mapping into 1st 16MB Roger Quadros
2015-08-07 9:12 ` [PATCH v2 14/22] ARM: dts: OMAP2+: Fix NAND device nodes Roger Quadros
2015-08-07 9:12 ` [PATCH v2 15/22] memory: omap-gpmc: Move device tree binding to correct location Roger Quadros
2015-08-07 9:12 ` [PATCH v2 16/22] memory: omap-gpmc: Support general purpose input for WAITPINs Roger Quadros
2015-08-13 11:58 ` Roger Quadros
2015-08-07 9:12 ` [PATCH v2 17/22] memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring Roger Quadros
2015-08-07 9:12 ` [PATCH v2 18/22] memory: omap-gpmc: Add irqchip support to the gpiochip Roger Quadros
2015-08-07 9:12 ` [PATCH v2 19/22] ARM: dts: dra7: Enable gpio & interrupt controller for gpmc node Roger Quadros
2015-08-07 9:12 ` [PATCH v2 20/22] mtd: nand: omap2: Implement NAND ready using gpiolib Roger Quadros
2015-08-07 9:12 ` [PATCH v2 21/22] ARM: dts: dra7x-evm: Provide NAND ready pin Roger Quadros
2015-08-07 9:12 ` [PATCH v2 22/22] memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via gpmc_regs Roger Quadros
2015-08-11 12:48 ` [PATCH v2 00/22] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms Tony Lindgren
[not found] ` <20150811124829.GM4215-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2015-08-13 7:13 ` Roger Quadros
[not found] ` <55CC43B1.4020409-l0cyMroinI0@public.gmane.org>
2015-08-13 8:36 ` Tony Lindgren
2015-08-13 12:00 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438938752-31010-9-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=computersforpeace@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=fcooper@ti.com \
--cc=javier@dowhile0.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox