From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kishon Vijay Abraham I Subject: [PATCH v2 00/11] omap_hsmmc: voltage switching and tuning Date: Tue, 25 Aug 2015 14:35:31 +0530 Message-ID: <1440493542-26150-1-git-send-email-kishon@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: linux-mmc-owner@vger.kernel.org To: ulf.hansson@linaro.org, afenkart@gmail.com, tony@atomide.com, linux-mmc@vger.kernel.org, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, nsekhar@ti.com Cc: neilb@suse.de, kishon@ti.com List-Id: linux-omap@vger.kernel.org Patch series implements voltage switching and tuning for omap_hsmmc driver. Changes from v1: *) rebased on top of [1] *) Patch breaking omap3 beagle xm is fixed. (set clk rate patch was breaking beagle xm) [1] -> https://lkml.org/lkml/2015/8/21/125 Did basic read/write test in J6, J6 Eco, Beagle-x15, AM437x EVM, Beaglebone black, OMAP5 uEVM and OMAP4 PANDA, OMAP3 beagle xm. Also performed PM suspend/resume test with OMAP3 beagle xm. Balaji T K (2): mmc: host: omap_hsmmc: add voltage switch support for UHS SD card mmc: host: omap_hsmmc: add tuning support Kishon Vijay Abraham I (8): mmc: host: omap_hsmmc: Support vmmc_aux to switch to 1.8v mmc: host: omap_hsmmc: separate setting voltage capabilities from bus power mmc: host: omap_hsmmc: program HCTL based on signal_voltage set by mmc core mmc: host: omap_hsmmc: set clk rate to the max frequency mmc: host: omap_hsmmc: set timing in the UHSMS field mmc: host: omap_hsmmc: Workaround for errata id i802 mmc: host: omap_hsmmc: Allow io voltage switch even for fixed vdd mmc: host: omap_hsmmc: remove incorrect voltage switch sequence Mugunthan V N (1): mmc: host: omap_hsmmc: add software timer when timeout greater than hardware capablility drivers/mmc/host/omap_hsmmc.c | 677 +++++++++++++++++++++++++++++++++-------- 1 file changed, 554 insertions(+), 123 deletions(-) -- 1.7.9.5