Linux on ARM based TI OMAP SoCs
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: ulf.hansson@linaro.org, afenkart@gmail.com, tony@atomide.com,
	linux-mmc@vger.kernel.org, linux-omap@vger.kernel.org,
	linux-kernel@vger.kernel.org, nsekhar@ti.com
Cc: neilb@suse.de, kishon@ti.com
Subject: [PATCH v3 11/15] mmc: host: omap_hsmmc: don't use ->set_power to set initial regulator state
Date: Thu, 27 Aug 2015 14:44:03 +0530	[thread overview]
Message-ID: <1440666847-12594-12-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1440666847-12594-1-git-send-email-kishon@ti.com>

If the regulator is enabled on boot (checked using regulator_is_enabled),
invoke regulator_enable() so that the usecount reflects the correct
state of the regulator and then disable the regulator so that the
initial state of the regulator is disabled. Avoid using ->set_power,
since set_power also takes care of setting the voltages which is not
needed at this point.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
---
 drivers/mmc/host/omap_hsmmc.c |   66 ++++++++++++++++++++++++++++++++++-------
 1 file changed, 56 insertions(+), 10 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index eec6975..cd4bd6d 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -409,6 +409,59 @@ err_set_voltage:
 	return ret;
 }
 
+static int omap_hsmmc_disable_boot_regulator(struct regulator *reg)
+{
+	int ret;
+
+	if (!reg)
+		return 0;
+
+	if (regulator_is_enabled(reg)) {
+		ret = regulator_enable(reg);
+		if (ret)
+			return ret;
+
+		ret = regulator_disable(reg);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int omap_hsmmc_disable_boot_regulators(struct omap_hsmmc_host *host)
+{
+	struct mmc_host *mmc = host->mmc;
+	int ret;
+
+	/*
+	 * disable regulators enabled during boot and get the usecount
+	 * right so that regulators can be enabled/disabled by checking
+	 * the return value of regulator_is_enabled
+	 */
+	ret = omap_hsmmc_disable_boot_regulator(mmc->supply.vmmc);
+	if (ret) {
+		dev_err(host->dev, "fail to disable boot enabled vmmc reg\n");
+		return ret;
+	}
+
+	ret = omap_hsmmc_disable_boot_regulator(mmc->supply.vqmmc);
+	if (ret) {
+		dev_err(host->dev,
+			"fail to disable boot enabled vmmc_aux reg\n");
+		return ret;
+	}
+
+	ret = omap_hsmmc_disable_boot_regulator(host->pbias);
+	if (ret) {
+		dev_err(host->dev,
+			"failed to disable boot enabled pbias reg\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 {
 	int ocr_value = 0;
@@ -456,17 +509,10 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 	/* For eMMC do not power off when not in sleep state */
 	if (mmc_pdata(host)->no_regulator_off_init)
 		return 0;
-	/*
-	 * To disable boot_on regulator, enable regulator
-	 * to increase usecount and then disable it.
-	 */
-	if ((mmc->supply.vmmc && regulator_is_enabled(mmc->supply.vmmc) > 0) ||
-	    (mmc->supply.vqmmc && regulator_is_enabled(mmc->supply.vqmmc))) {
-		int vdd = ffs(mmc_pdata(host)->ocr_mask) - 1;
 
-		omap_hsmmc_set_power(host->dev, 1, vdd);
-		omap_hsmmc_set_power(host->dev, 0, 0);
-	}
+	ret = omap_hsmmc_disable_boot_regulators(host);
+	if (ret)
+		return ret;
 
 	return 0;
 }
-- 
1.7.9.5

  parent reply	other threads:[~2015-08-27  9:14 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-27  9:13 [PATCH v3 00/15] omap_hsmmc: regulator usage cleanup and fixes Kishon Vijay Abraham I
2015-08-27  9:13 ` [PATCH v3 01/15] mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc Kishon Vijay Abraham I
2015-08-27  9:13 ` [PATCH v3 02/15] mmc: host: omap_hsmmc: return on fatal errors from omap_hsmmc_reg_get Kishon Vijay Abraham I
2015-08-28 18:07   ` Olof Johansson
2015-08-28 19:03     ` Tony Lindgren
2015-08-31  5:44       ` Kishon Vijay Abraham I
2015-08-31 20:58         ` Tony Lindgren
2015-08-31 21:14           ` Tony Lindgren
2015-09-01 14:33             ` Grygorii Strashko
2015-09-01 14:50               ` Tony Lindgren
2015-09-01 14:54                 ` Grygorii Strashko
2015-09-01 15:03                   ` Tony Lindgren
2015-09-10 16:59                     ` Kevin Hilman
2015-09-10 20:45                       ` Tony Lindgren
2015-08-27  9:13 ` [PATCH v3 03/15] mmc: host: omap_hsmmc: cleanup omap_hsmmc_reg_get() Kishon Vijay Abraham I
2015-08-27  9:13 ` [PATCH v3 04/15] mmc: host: omap_hsmmc: use the ocrmask provided by the vmmc regulator Kishon Vijay Abraham I
2015-08-27  9:13 ` [PATCH v3 05/15] mmc: host: omap_hsmmc: use mmc_host's vmmc and vqmmc Kishon Vijay Abraham I
2015-08-27  9:13 ` [PATCH v3 06/15] mmc: host: omap_hsmmc: remove unnecessary pbias set_voltage Kishon Vijay Abraham I
2015-08-27  9:13 ` [PATCH v3 07/15] mmc: host: omap_hsmmc: return error if any of the regulator APIs fail Kishon Vijay Abraham I
2015-08-27  9:14 ` [PATCH v3 08/15] mmc: host: omap_hsmmc: add separate functions for enable/disable supply Kishon Vijay Abraham I
2015-08-27  9:14 ` [PATCH v3 09/15] mmc: host: omap_hsmmc: add separate function to set pbias Kishon Vijay Abraham I
2015-08-27  9:14 ` [PATCH v3 10/15] mmc: host: omap_hsmmc: avoid pbias regulator enable on power off Kishon Vijay Abraham I
2015-08-27  9:14 ` Kishon Vijay Abraham I [this message]
2015-08-27  9:14 ` [PATCH v3 12/15] mmc: host: omap_hsmmc: enable/disable vmmc_aux regulator based on previous state Kishon Vijay Abraham I
2015-08-27  9:14 ` [PATCH v3 13/15] mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status Kishon Vijay Abraham I
2015-08-27 12:41   ` Ulf Hansson
2015-08-27 12:42     ` Ulf Hansson
2015-08-27 12:47       ` Kishon Vijay Abraham I
2015-08-27 12:49         ` Ulf Hansson
2015-08-27  9:14 ` [PATCH v3 14/15] mmc: host: omap_hsmmc: use ios->vdd for setting vmmc voltage Kishon Vijay Abraham I
2015-08-27  9:14 ` [PATCH v3 15/15] mmc: host: omap_hsmmc: remove CONFIG_REGULATOR check Kishon Vijay Abraham I
2015-08-27 13:09 ` [PATCH v3 00/15] omap_hsmmc: regulator usage cleanup and fixes Ulf Hansson
2015-08-27 13:20   ` Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1440666847-12594-12-git-send-email-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=afenkart@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=neilb@suse.de \
    --cc=nsekhar@ti.com \
    --cc=tony@atomide.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox