linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jyri Sarha <jsarha@ti.com>
To: dri-devel@lists.freedesktop.org, airlied@linux.ie,
	linux-omap@vger.kernel.org
Cc: rmk+kernel@arm.linux.org.uk, tomi.valkeinen@ti.com,
	Liviu.Dudau@arm.com, Jyri Sarha <jsarha@ti.com>
Subject: [PATCH RFC] drm/i2c: tda998x: Only set atomic funcs if bound to atomic drm driver
Date: Fri, 15 Jan 2016 14:55:26 +0200	[thread overview]
Message-ID: <1452862526-32176-1-git-send-email-jsarha@ti.com> (raw)

Only set atomic connector callbacks if the tda998x driver is bound to
a drm driver that supports atomic modesetting. At least
drm_crtc_helper_set_config() calls connectors dpms callback without
knowing that it may assume atomic modeset support. Calling
drm_atomic_helper_connector_dpms() causes a crash with a driver that
does not have atomic state initialized.

Fixes commit 9736e988d328 ("drm/i2c: tda998x: Add support for atomic
modesetting").

Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
I am not sure if this is the best way to fix the issue, but after
9736e988d328 Beaglebone-Black HDMI is totally broken and this fixes
the issue. I am currently working on atomic modesetting for tilcdc,
but there is no way it makes it to 4.5 release.

Best regards,
Jyri

 drivers/gpu/drm/i2c/tda998x_drv.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 012d36d..67d1408 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -1382,7 +1382,7 @@ static void tda998x_connector_destroy(struct drm_connector *connector)
 	drm_connector_cleanup(connector);
 }
 
-static const struct drm_connector_funcs tda998x_connector_funcs = {
+static const struct drm_connector_funcs tda998x_connector_atomic_funcs = {
 	.dpms = drm_atomic_helper_connector_dpms,
 	.reset = drm_atomic_helper_connector_reset,
 	.fill_modes = drm_helper_probe_single_connector_modes,
@@ -1392,15 +1392,28 @@ static const struct drm_connector_funcs tda998x_connector_funcs = {
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 };
 
+static const struct drm_connector_funcs tda998x_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.detect = tda998x_connector_detect,
+	.destroy = tda998x_connector_destroy,
+};
+
 static int tda998x_bind(struct device *dev, struct device *master, void *data)
 {
 	struct tda998x_encoder_params *params = dev->platform_data;
 	struct i2c_client *client = to_i2c_client(dev);
 	struct drm_device *drm = data;
 	struct tda998x_priv *priv;
+	const struct drm_connector_funcs *connector_funcs;
 	u32 crtcs = 0;
 	int ret;
 
+	if (drm_core_check_feature(drm, DRIVER_ATOMIC))
+		connector_funcs = &tda998x_connector_atomic_funcs;
+	else
+		connector_funcs = &tda998x_connector_funcs;
+
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
@@ -1437,7 +1450,7 @@ static int tda998x_bind(struct device *dev, struct device *master, void *data)
 	drm_connector_helper_add(&priv->connector,
 				 &tda998x_connector_helper_funcs);
 	ret = drm_connector_init(drm, &priv->connector,
-				 &tda998x_connector_funcs,
+				 connector_funcs,
 				 DRM_MODE_CONNECTOR_HDMIA);
 	if (ret)
 		goto err_connector;
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

             reply	other threads:[~2016-01-15 12:55 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-15 12:55 Jyri Sarha [this message]
2016-01-15 14:09 ` [PATCH RFC] drm/i2c: tda998x: Only set atomic funcs if bound to atomic drm driver Liviu.Dudau
2016-01-16 19:55   ` Jyri Sarha

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1452862526-32176-1-git-send-email-jsarha@ti.com \
    --to=jsarha@ti.com \
    --cc=Liviu.Dudau@arm.com \
    --cc=airlied@linux.ie \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=rmk+kernel@arm.linux.org.uk \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).