linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sebastian Reichel <sre@kernel.org>
To: Sebastian Reichel <sre@kernel.org>,
	linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Tony Lindgren" <tony@atomide.com>,
	"Aaro Koskinen" <aaro.koskinen@iki.fi>,
	"Pavel Machek" <pavel@ucw.cz>,
	"Ivaylo Dimitrov" <ivo.g.dimitrov.75@gmail.com>,
	"Pali Rohár" <pali.rohar@gmail.com>
Subject: [RFC 15/19] HSI: omap_ssi_port: replace pm_runtime_put_sync with non-sync variant
Date: Sat, 18 Jun 2016 18:27:05 +0200	[thread overview]
Message-ID: <1466267229-25012-16-git-send-email-sre@kernel.org> (raw)
In-Reply-To: <1466267229-25012-1-git-send-email-sre@kernel.org>

There is no need to wait for hardware to really reach idle states,
so just release runtime PM asynchronously.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
 drivers/hsi/controllers/omap_ssi_port.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/hsi/controllers/omap_ssi_port.c b/drivers/hsi/controllers/omap_ssi_port.c
index 92064221dbab..aef5a8666d48 100644
--- a/drivers/hsi/controllers/omap_ssi_port.c
+++ b/drivers/hsi/controllers/omap_ssi_port.c
@@ -375,7 +375,7 @@ static int ssi_async_break(struct hsi_msg *msg)
 		spin_unlock_bh(&omap_port->lock);
 	}
 out:
-	pm_runtime_put_sync(omap_port->pdev);
+	pm_runtime_put(omap_port->pdev);
 
 	return err;
 }
@@ -515,7 +515,7 @@ static int ssi_setup(struct hsi_client *cl)
 	omap_port->ssr.mode = cl->rx_cfg.mode;
 out:
 	spin_unlock_bh(&omap_port->lock);
-	pm_runtime_put_sync(omap_port->pdev);
+	pm_runtime_put(omap_port->pdev);
 
 	return err;
 }
@@ -546,7 +546,7 @@ static int ssi_flush(struct hsi_client *cl)
 			continue;
 		writew_relaxed(0, omap_ssi->gdd + SSI_GDD_CCR_REG(i));
 		if (msg->ttype == HSI_MSG_READ)
-			pm_runtime_put_sync(omap_port->pdev);
+			pm_runtime_put(omap_port->pdev);
 		omap_ssi->gdd_trn[i].msg = NULL;
 	}
 	/* Flush all SST buffers */
@@ -570,7 +570,7 @@ static int ssi_flush(struct hsi_client *cl)
 	for (i = 0; i < omap_port->channels; i++) {
 		/* Release write clocks */
 		if (!list_empty(&omap_port->txqueue[i]))
-			pm_runtime_put_sync(omap_port->pdev);
+			pm_runtime_put(omap_port->pdev);
 		ssi_flush_queue(&omap_port->txqueue[i], NULL);
 		ssi_flush_queue(&omap_port->rxqueue[i], NULL);
 	}
@@ -580,7 +580,7 @@ static int ssi_flush(struct hsi_client *cl)
 	pinctrl_pm_select_default_state(omap_port->pdev);
 
 	spin_unlock_bh(&omap_port->lock);
-	pm_runtime_put_sync(omap_port->pdev);
+	pm_runtime_put(omap_port->pdev);
 
 	return 0;
 }
@@ -687,7 +687,7 @@ static void ssi_cleanup_queues(struct hsi_client *cl)
 			txbufstate |= (1 << i);
 			status |= SSI_DATAACCEPT(i);
 			/* Release the clocks writes, also GDD ones */
-			pm_runtime_put_sync(omap_port->pdev);
+			pm_runtime_put(omap_port->pdev);
 		}
 		ssi_flush_queue(&omap_port->txqueue[i], cl);
 	}
@@ -742,7 +742,7 @@ static void ssi_cleanup_gdd(struct hsi_controller *ssi, struct hsi_client *cl)
 		 * ssi_cleanup_queues
 		 */
 		if (msg->ttype == HSI_MSG_READ)
-			pm_runtime_put_sync(omap_port->pdev);
+			pm_runtime_put(omap_port->pdev);
 		omap_ssi->gdd_trn[i].msg = NULL;
 	}
 	tmp = readl_relaxed(omap_ssi->sys + SSI_GDD_MPU_IRQ_ENABLE_REG);
@@ -790,7 +790,7 @@ static int ssi_release(struct hsi_client *cl)
 		WARN_ON(omap_port->wk_refcount != 0);
 	}
 	spin_unlock_bh(&omap_port->lock);
-	pm_runtime_put_sync(omap_port->pdev);
+	pm_runtime_put(omap_port->pdev);
 
 	return 0;
 }
@@ -937,7 +937,7 @@ static void ssi_pio_complete(struct hsi_port *port, struct list_head *queue)
 	reg = readl(omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
 	if (msg->ttype == HSI_MSG_WRITE) {
 		/* Release clocks for write transfer */
-		pm_runtime_put_sync(omap_port->pdev);
+		pm_runtime_put(omap_port->pdev);
 	}
 	reg &= ~val;
 	writel_relaxed(reg, omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
-- 
2.8.1

  parent reply	other threads:[~2016-06-18 16:27 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-18 16:26 [RFC 00/19] Runtime PM fixes for omap-ssi Sebastian Reichel
2016-06-18 16:26 ` [RFC 01/19] HSI: omap_ssi_port: remove useless newline Sebastian Reichel
2016-06-18 16:26 ` [RFC 02/19] HSI: omap_ssi: do not reset module Sebastian Reichel
2016-06-21 11:38   ` Tony Lindgren
2016-06-18 16:26 ` [RFC 03/19] HSI: ssi_protocol: avoid ssi_waketest call with held spinlock Sebastian Reichel
2016-06-18 16:26 ` [RFC 04/19] HSI: ssi_protocol: replace spin_lock with spin_lock_bh Sebastian Reichel
2016-06-18 16:26 ` [RFC 05/19] HSI: ssi_protocol: fix ssip_xmit invocation Sebastian Reichel
2016-06-18 16:26 ` [RFC 06/19] HSI: omap_ssi: convert cawake irq handler to thread Sebastian Reichel
2016-06-18 16:26 ` [RFC 07/19] HSI: omap_ssi_port: replace wkin_cken with atomic bitmap operations Sebastian Reichel
2016-06-18 16:26 ` [RFC 08/19] HSI: core: switch port event notifier from atomic to blocking Sebastian Reichel
2016-06-18 16:26 ` [RFC 09/19] HSI: omap_ssi_port: prepare start_tx/stop_tx for blocking pm_runtime calls Sebastian Reichel
2016-06-18 16:27 ` [RFC 10/19] HSI: omap_ssi_core: use pm_runtime_put instead of pm_runtime_put_sync Sebastian Reichel
2016-06-18 16:27 ` [RFC 11/19] HSI: omap_ssi_core: remove pm_runtime_get_sync call from tasklet Sebastian Reichel
2016-06-18 16:27 ` [RFC 12/19] HSI: omap_ssi_port: switch to threaded pio irq Sebastian Reichel
2016-06-18 16:27 ` [RFC 13/19] HSI: omap_ssi_port: avoid pm_runtime_get_sync in ssi_start_dma and ssi_start_pio Sebastian Reichel
2016-06-18 16:27 ` [RFC 14/19] HSI: omap_ssi_port: avoid calling runtime_pm_*_sync inside spinlock Sebastian Reichel
2016-06-18 16:27 ` Sebastian Reichel [this message]
2016-06-18 16:27 ` [RFC 16/19] HSI: omap_ssi_port: ensure clocks are kept enabled during transfer Sebastian Reichel
2016-06-18 16:27 ` [RFC 17/19] HSI: omap_ssi: call msg->complete() from process context Sebastian Reichel
2016-06-18 16:27 ` [RFC 18/19] HSI: omap_ssi_port: use rpm autosuspend API Sebastian Reichel
2016-06-18 16:27 ` [RFC 19/19] HSI: omap_ssi: drop pm_runtime_irq_safe Sebastian Reichel
2016-06-21 11:41   ` Tony Lindgren
2016-06-18 18:54 ` [RFC 00/19] Runtime PM fixes for omap-ssi Pavel Machek
2016-06-18 20:21   ` Sebastian Reichel
2016-06-18 22:00     ` Pavel Machek
2016-06-28  0:33 ` Sebastian Reichel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1466267229-25012-16-git-send-email-sre@kernel.org \
    --to=sre@kernel.org \
    --cc=aaro.koskinen@iki.fi \
    --cc=ivo.g.dimitrov.75@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=pali.rohar@gmail.com \
    --cc=pavel@ucw.cz \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).