From: Sebastian Reichel <sre@kernel.org>
To: Sebastian Reichel <sre@kernel.org>,
linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Tony Lindgren" <tony@atomide.com>,
"Aaro Koskinen" <aaro.koskinen@iki.fi>,
"Pavel Machek" <pavel@ucw.cz>,
"Ivaylo Dimitrov" <ivo.g.dimitrov.75@gmail.com>,
"Pali Rohár" <pali.rohar@gmail.com>
Subject: [RFC 03/19] HSI: ssi_protocol: avoid ssi_waketest call with held spinlock
Date: Sat, 18 Jun 2016 18:26:53 +0200 [thread overview]
Message-ID: <1466267229-25012-4-git-send-email-sre@kernel.org> (raw)
In-Reply-To: <1466267229-25012-1-git-send-email-sre@kernel.org>
This avoids calling ssi_waketest(), while a spinlock is
being hold, since ssi_waketest may sleep once irq_safe
runtime pm is disabled.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
drivers/hsi/clients/ssi_protocol.c | 41 +++++++++++++++++++++++---------------
1 file changed, 25 insertions(+), 16 deletions(-)
diff --git a/drivers/hsi/clients/ssi_protocol.c b/drivers/hsi/clients/ssi_protocol.c
index 6595d2091268..8534efda8140 100644
--- a/drivers/hsi/clients/ssi_protocol.c
+++ b/drivers/hsi/clients/ssi_protocol.c
@@ -88,6 +88,8 @@ void ssi_waketest(struct hsi_client *cl, unsigned int enable);
#define SSIP_READY_CMD SSIP_CMD(SSIP_READY, 0)
#define SSIP_SWBREAK_CMD SSIP_CMD(SSIP_SW_BREAK, 0)
+#define SSIP_WAKETEST_FLAG 0
+
/* Main state machine states */
enum {
INIT,
@@ -116,7 +118,7 @@ enum {
* @main_state: Main state machine
* @send_state: TX state machine
* @recv_state: RX state machine
- * @waketest: Flag to follow wake line test
+ * @flags: Flags, currently only used to follow wake line test
* @rxid: RX data id
* @txid: TX data id
* @txqueue_len: TX queue length
@@ -137,7 +139,7 @@ struct ssi_protocol {
unsigned int main_state;
unsigned int send_state;
unsigned int recv_state;
- unsigned int waketest:1;
+ unsigned long flags;
u8 rxid;
u8 txid;
unsigned int txqueue_len;
@@ -405,15 +407,17 @@ static void ssip_reset(struct hsi_client *cl)
spin_lock_bh(&ssi->lock);
if (ssi->send_state != SEND_IDLE)
hsi_stop_tx(cl);
- if (ssi->waketest)
- ssi_waketest(cl, 0);
+ spin_unlock_bh(&ssi->lock);
+ if (test_and_clear_bit(SSIP_WAKETEST_FLAG, &ssi->flags))
+ ssi_waketest(cl, 0); /* FIXME: To be removed */
+ spin_lock_bh(&ssi->lock);
del_timer(&ssi->rx_wd);
del_timer(&ssi->tx_wd);
del_timer(&ssi->keep_alive);
ssi->main_state = 0;
ssi->send_state = 0;
ssi->recv_state = 0;
- ssi->waketest = 0;
+ ssi->flags = 0;
ssi->rxid = 0;
ssi->txid = 0;
list_for_each_safe(head, tmp, &ssi->txqueue) {
@@ -437,7 +441,8 @@ static void ssip_dump_state(struct hsi_client *cl)
dev_err(&cl->device, "Send state: %d\n", ssi->send_state);
dev_err(&cl->device, "CMT %s\n", (ssi->main_state == ACTIVE) ?
"Online" : "Offline");
- dev_err(&cl->device, "Wake test %d\n", ssi->waketest);
+ dev_err(&cl->device, "Wake test %d\n",
+ test_bit(SSIP_WAKETEST_FLAG, &ssi->flags));
dev_err(&cl->device, "Data RX id: %d\n", ssi->rxid);
dev_err(&cl->device, "Data TX id: %d\n", ssi->txid);
@@ -668,10 +673,12 @@ static void ssip_rx_bootinforeq(struct hsi_client *cl, u32 cmd)
case HANDSHAKE:
spin_lock(&ssi->lock);
ssi->main_state = HANDSHAKE;
- if (!ssi->waketest) {
- ssi->waketest = 1;
+ spin_unlock(&ssi->lock);
+
+ if (!test_and_set_bit(SSIP_WAKETEST_FLAG, &ssi->flags))
ssi_waketest(cl, 1); /* FIXME: To be removed */
- }
+
+ spin_lock(&ssi->lock);
/* Start boot handshake watchdog */
mod_timer(&ssi->tx_wd, jiffies + msecs_to_jiffies(SSIP_WDTOUT));
spin_unlock(&ssi->lock);
@@ -718,10 +725,12 @@ static void ssip_rx_waketest(struct hsi_client *cl, u32 cmd)
spin_unlock(&ssi->lock);
return;
}
- if (ssi->waketest) {
- ssi->waketest = 0;
+ spin_unlock(&ssi->lock);
+
+ if (test_and_clear_bit(SSIP_WAKETEST_FLAG, &ssi->flags))
ssi_waketest(cl, 0); /* FIXME: To be removed */
- }
+
+ spin_lock(&ssi->lock);
ssi->main_state = ACTIVE;
del_timer(&ssi->tx_wd); /* Stop boot handshake timer */
spin_unlock(&ssi->lock);
@@ -926,11 +935,11 @@ static int ssip_pn_open(struct net_device *dev)
}
dev_dbg(&cl->device, "Configuring SSI port\n");
hsi_setup(cl);
- spin_lock_bh(&ssi->lock);
- if (!ssi->waketest) {
- ssi->waketest = 1;
+
+ if (!test_and_set_bit(SSIP_WAKETEST_FLAG, &ssi->flags))
ssi_waketest(cl, 1); /* FIXME: To be removed */
- }
+
+ spin_lock_bh(&ssi->lock);
ssi->main_state = HANDSHAKE;
spin_unlock_bh(&ssi->lock);
--
2.8.1
next prev parent reply other threads:[~2016-06-18 16:26 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-18 16:26 [RFC 00/19] Runtime PM fixes for omap-ssi Sebastian Reichel
2016-06-18 16:26 ` [RFC 01/19] HSI: omap_ssi_port: remove useless newline Sebastian Reichel
2016-06-18 16:26 ` [RFC 02/19] HSI: omap_ssi: do not reset module Sebastian Reichel
2016-06-21 11:38 ` Tony Lindgren
2016-06-18 16:26 ` Sebastian Reichel [this message]
2016-06-18 16:26 ` [RFC 04/19] HSI: ssi_protocol: replace spin_lock with spin_lock_bh Sebastian Reichel
2016-06-18 16:26 ` [RFC 05/19] HSI: ssi_protocol: fix ssip_xmit invocation Sebastian Reichel
2016-06-18 16:26 ` [RFC 06/19] HSI: omap_ssi: convert cawake irq handler to thread Sebastian Reichel
2016-06-18 16:26 ` [RFC 07/19] HSI: omap_ssi_port: replace wkin_cken with atomic bitmap operations Sebastian Reichel
2016-06-18 16:26 ` [RFC 08/19] HSI: core: switch port event notifier from atomic to blocking Sebastian Reichel
2016-06-18 16:26 ` [RFC 09/19] HSI: omap_ssi_port: prepare start_tx/stop_tx for blocking pm_runtime calls Sebastian Reichel
2016-06-18 16:27 ` [RFC 10/19] HSI: omap_ssi_core: use pm_runtime_put instead of pm_runtime_put_sync Sebastian Reichel
2016-06-18 16:27 ` [RFC 11/19] HSI: omap_ssi_core: remove pm_runtime_get_sync call from tasklet Sebastian Reichel
2016-06-18 16:27 ` [RFC 12/19] HSI: omap_ssi_port: switch to threaded pio irq Sebastian Reichel
2016-06-18 16:27 ` [RFC 13/19] HSI: omap_ssi_port: avoid pm_runtime_get_sync in ssi_start_dma and ssi_start_pio Sebastian Reichel
2016-06-18 16:27 ` [RFC 14/19] HSI: omap_ssi_port: avoid calling runtime_pm_*_sync inside spinlock Sebastian Reichel
2016-06-18 16:27 ` [RFC 15/19] HSI: omap_ssi_port: replace pm_runtime_put_sync with non-sync variant Sebastian Reichel
2016-06-18 16:27 ` [RFC 16/19] HSI: omap_ssi_port: ensure clocks are kept enabled during transfer Sebastian Reichel
2016-06-18 16:27 ` [RFC 17/19] HSI: omap_ssi: call msg->complete() from process context Sebastian Reichel
2016-06-18 16:27 ` [RFC 18/19] HSI: omap_ssi_port: use rpm autosuspend API Sebastian Reichel
2016-06-18 16:27 ` [RFC 19/19] HSI: omap_ssi: drop pm_runtime_irq_safe Sebastian Reichel
2016-06-21 11:41 ` Tony Lindgren
2016-06-18 18:54 ` [RFC 00/19] Runtime PM fixes for omap-ssi Pavel Machek
2016-06-18 20:21 ` Sebastian Reichel
2016-06-18 22:00 ` Pavel Machek
2016-06-28 0:33 ` Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466267229-25012-4-git-send-email-sre@kernel.org \
--to=sre@kernel.org \
--cc=aaro.koskinen@iki.fi \
--cc=ivo.g.dimitrov.75@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=pavel@ucw.cz \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).