From mboxrd@z Thu Jan 1 00:00:00 1970 From: Keerthy Subject: [PATCH 0/7] thermal: ti-soc-thermal: Migrate slope/offset data to device tree Date: Wed, 1 Mar 2017 15:59:43 +0530 Message-ID: <1488364190-23488-1-git-send-email-j-keerthy@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: tony@atomide.com, edubezval@gmail.com Cc: linux-pm@vger.kernel.org, j-keerthy@ti.com, linux-kernel@vger.kernel.org, t-kristo@ti.com, robh+dt@kernel.org, rui.zhang@intel.com, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: linux-omap@vger.kernel.org Currently the slope and offset values for calculating the hot spot temperature of a particular thermal zone is part of driver data. Pass them here instead and obtain the values while of node parsing. Tested for the slope and constant values on DRA7-EVM. Keerthy (7): ARM: DRA7: Thermal: Add slope and offset values ARM: OMAP5: Thermal: Add slope and offset values ARM: OMAP443x: Thermal: Add slope and offset values ARM: OMAP4460: Thermal: Add slope and offset values thermal: ti-soc-thermal: Fetch slope and offset from DT thermal: ti-soc-thermal: Remove redundant constants thermal: ti-soc-thermal: Remove redundant code arch/arm/boot/dts/dra7.dtsi | 17 +++ arch/arm/boot/dts/omap443x.dtsi | 4 + arch/arm/boot/dts/omap4460.dtsi | 4 + arch/arm/boot/dts/omap5.dtsi | 9 ++ .../thermal/ti-soc-thermal/dra752-thermal-data.c | 10 -- .../thermal/ti-soc-thermal/omap4-thermal-data.c | 4 - .../thermal/ti-soc-thermal/omap5-thermal-data.c | 4 - drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 164 ++------------------- 8 files changed, 45 insertions(+), 171 deletions(-) -- 1.9.1