From: Keerthy <j-keerthy@ti.com>
To: t-kristo@ti.com, sboyd@kernel.org, tony@atomide.com
Cc: linux-clk@vger.kernel.org, d-gerlach@ti.com,
linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
j-keerthy@ti.com, Russ Dill <Russ.Dill@ti.com>
Subject: [PATCH v3 3/4] clk: ti: Add functions to save/restore clk context
Date: Thu, 21 Jun 2018 13:45:06 +0530 [thread overview]
Message-ID: <1529568907-19930-4-git-send-email-j-keerthy@ti.com> (raw)
In-Reply-To: <1529568907-19930-1-git-send-email-j-keerthy@ti.com>
From: Russ Dill <Russ.Dill@ti.com>
SoCs like AM43XX lose clock registers context during RTC-only
suspend. Hence add functions to save/restore the clock registers
context.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Russ Dill <Russ.Dill@ti.com>
---
Changes in v2:
* Replaced clk_dflt_restore instances to clk_gate_restore_context
drivers/clk/ti/clock.h | 2 +
drivers/clk/ti/divider.c | 36 ++++++++++++++
drivers/clk/ti/dpll.c | 6 +++
drivers/clk/ti/dpll3xxx.c | 124 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/ti/gate.c | 3 ++
drivers/clk/ti/mux.c | 29 +++++++++++
include/linux/clk/ti.h | 6 +++
7 files changed, 206 insertions(+)
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index b582780..26fbdf2 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -24,6 +24,7 @@ struct clk_omap_divider {
u8 flags;
s8 latch;
const struct clk_div_table *table;
+ u32 context;
};
#define to_clk_omap_divider(_hw) container_of(_hw, struct clk_omap_divider, hw)
@@ -36,6 +37,7 @@ struct clk_omap_mux {
u8 shift;
s8 latch;
u8 flags;
+ u8 saved_parent;
};
#define to_clk_omap_mux(_hw) container_of(_hw, struct clk_omap_mux, hw)
diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c
index aaa277d..4418e0d 100644
--- a/drivers/clk/ti/divider.c
+++ b/drivers/clk/ti/divider.c
@@ -268,10 +268,46 @@ static int ti_clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
return 0;
}
+/**
+ * clk_divider_save_context - Save the divider value
+ * @hw: pointer struct clk_hw
+ *
+ * Save the divider value
+ */
+static int clk_divider_save_context(struct clk_hw *hw)
+{
+ struct clk_omap_divider *divider = to_clk_omap_divider(hw);
+ u32 val;
+
+ val = ti_clk_ll_ops->clk_readl(÷r->reg) >> divider->shift;
+ divider->context = val & div_mask(divider);
+
+ return 0;
+}
+
+/**
+ * clk_divider_restore_context - restore the saved the divider value
+ * @hw: pointer struct clk_hw
+ *
+ * Restore the saved the divider value
+ */
+static void clk_divider_restore_context(struct clk_hw *hw)
+{
+ struct clk_omap_divider *divider = to_clk_omap_divider(hw);
+ u32 val;
+
+ val = ti_clk_ll_ops->clk_readl(÷r->reg);
+ val &= ~(div_mask(divider) << divider->shift);
+ val |= divider->context << divider->shift;
+ ti_clk_ll_ops->clk_writel(val, ÷r->reg);
+}
+
const struct clk_ops ti_clk_divider_ops = {
.recalc_rate = ti_clk_divider_recalc_rate,
.round_rate = ti_clk_divider_round_rate,
.set_rate = ti_clk_divider_set_rate,
+ .save_context = clk_divider_save_context,
+ .restore_context = clk_divider_restore_context,
};
static struct clk *_register_divider(struct device *dev, const char *name,
diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
index 7d33ca9..b1c4d8a 100644
--- a/drivers/clk/ti/dpll.c
+++ b/drivers/clk/ti/dpll.c
@@ -39,6 +39,8 @@
.set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent,
.determine_rate = &omap4_dpll_regm4xen_determine_rate,
.get_parent = &omap2_init_dpll_parent,
+ .save_context = &omap3_core_dpll_save_context,
+ .restore_context = &omap3_core_dpll_restore_context,
};
#else
static const struct clk_ops dpll_m4xen_ck_ops = {};
@@ -62,6 +64,8 @@
.set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent,
.determine_rate = &omap3_noncore_dpll_determine_rate,
.get_parent = &omap2_init_dpll_parent,
+ .save_context = &omap3_noncore_dpll_save_context,
+ .restore_context = &omap3_noncore_dpll_restore_context,
};
static const struct clk_ops dpll_no_gate_ck_ops = {
@@ -72,6 +76,8 @@
.set_parent = &omap3_noncore_dpll_set_parent,
.set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent,
.determine_rate = &omap3_noncore_dpll_determine_rate,
+ .save_context = &omap3_noncore_dpll_save_context,
+ .restore_context = &omap3_noncore_dpll_restore_context
};
#else
static const struct clk_ops dpll_core_ck_ops = {};
diff --git a/drivers/clk/ti/dpll3xxx.c b/drivers/clk/ti/dpll3xxx.c
index 4534de2..44b6b64 100644
--- a/drivers/clk/ti/dpll3xxx.c
+++ b/drivers/clk/ti/dpll3xxx.c
@@ -782,6 +782,130 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
return rate;
}
+/**
+ * omap3_core_dpll_save_context - Save the m and n values of the divider
+ * @hw: pointer struct clk_hw
+ *
+ * Before the dpll registers are lost save the last rounded rate m and n
+ * and the enable mask.
+ */
+int omap3_core_dpll_save_context(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+ u32 v;
+
+ dd = clk->dpll_data;
+
+ v = ti_clk_ll_ops->clk_readl(&dd->control_reg);
+ clk->context = (v & dd->enable_mask) >> __ffs(dd->enable_mask);
+
+ if (clk->context == DPLL_LOCKED) {
+ v = ti_clk_ll_ops->clk_readl(&dd->mult_div1_reg);
+ dd->last_rounded_m = (v & dd->mult_mask) >>
+ __ffs(dd->mult_mask);
+ dd->last_rounded_n = ((v & dd->div1_mask) >>
+ __ffs(dd->div1_mask)) + 1;
+ }
+
+ return 0;
+}
+
+/**
+ * omap3_core_dpll_restore_context - restore the m and n values of the divider
+ * @hw: pointer struct clk_hw
+ *
+ * Restore the last rounded rate m and n
+ * and the enable mask.
+ */
+void omap3_core_dpll_restore_context(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ const struct dpll_data *dd;
+ u32 v;
+
+ dd = clk->dpll_data;
+
+ if (clk->context == DPLL_LOCKED) {
+ _omap3_dpll_write_clken(clk, 0x4);
+ _omap3_wait_dpll_status(clk, 0);
+
+ v = ti_clk_ll_ops->clk_readl(&dd->mult_div1_reg);
+ v &= ~(dd->mult_mask | dd->div1_mask);
+ v |= dd->last_rounded_m << __ffs(dd->mult_mask);
+ v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
+ ti_clk_ll_ops->clk_writel(v, &dd->mult_div1_reg);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOCKED);
+ _omap3_wait_dpll_status(clk, 1);
+ } else {
+ _omap3_dpll_write_clken(clk, clk->context);
+ }
+}
+
+/**
+ * omap3_non_core_dpll_save_context - Save the m and n values of the divider
+ * @hw: pointer struct clk_hw
+ *
+ * Before the dpll registers are lost save the last rounded rate m and n
+ * and the enable mask.
+ */
+int omap3_noncore_dpll_save_context(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+ u32 v;
+
+ dd = clk->dpll_data;
+
+ v = ti_clk_ll_ops->clk_readl(&dd->control_reg);
+ clk->context = (v & dd->enable_mask) >> __ffs(dd->enable_mask);
+
+ if (clk->context == DPLL_LOCKED) {
+ v = ti_clk_ll_ops->clk_readl(&dd->mult_div1_reg);
+ dd->last_rounded_m = (v & dd->mult_mask) >>
+ __ffs(dd->mult_mask);
+ dd->last_rounded_n = ((v & dd->div1_mask) >>
+ __ffs(dd->div1_mask)) + 1;
+ }
+
+ return 0;
+}
+
+/**
+ * omap3_core_dpll_restore_context - restore the m and n values of the divider
+ * @hw: pointer struct clk_hw
+ *
+ * Restore the last rounded rate m and n
+ * and the enable mask.
+ */
+void omap3_noncore_dpll_restore_context(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ const struct dpll_data *dd;
+ u32 ctrl, mult_div1;
+
+ dd = clk->dpll_data;
+
+ ctrl = ti_clk_ll_ops->clk_readl(&dd->control_reg);
+ mult_div1 = ti_clk_ll_ops->clk_readl(&dd->mult_div1_reg);
+
+ if (clk->context == ((ctrl & dd->enable_mask) >>
+ __ffs(dd->enable_mask)) &&
+ dd->last_rounded_m == ((mult_div1 & dd->mult_mask) >>
+ __ffs(dd->mult_mask)) &&
+ dd->last_rounded_n == ((mult_div1 & dd->div1_mask) >>
+ __ffs(dd->div1_mask)) + 1) {
+ /* nothing to be done */
+ return;
+ }
+
+ if (clk->context == DPLL_LOCKED)
+ omap3_noncore_dpll_program(clk, 0);
+ else
+ _omap3_dpll_write_clken(clk, clk->context);
+}
+
/* OMAP3/4 non-CORE DPLL clkops */
const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
.allow_idle = omap3_dpll_allow_idle,
diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c
index 935b2de..2453b36 100644
--- a/drivers/clk/ti/gate.c
+++ b/drivers/clk/ti/gate.c
@@ -33,6 +33,7 @@
.init = &omap2_init_clk_clkdm,
.enable = &omap2_clkops_enable_clkdm,
.disable = &omap2_clkops_disable_clkdm,
+ .restore_context = clk_gate_restore_context,
};
const struct clk_ops omap_gate_clk_ops = {
@@ -40,6 +41,7 @@
.enable = &omap2_dflt_clk_enable,
.disable = &omap2_dflt_clk_disable,
.is_enabled = &omap2_dflt_clk_is_enabled,
+ .restore_context = clk_gate_restore_context,
};
static const struct clk_ops omap_gate_clk_hsdiv_restore_ops = {
@@ -47,6 +49,7 @@
.enable = &omap36xx_gate_clk_enable_with_hsdiv_restore,
.disable = &omap2_dflt_clk_disable,
.is_enabled = &omap2_dflt_clk_is_enabled,
+ .restore_context = clk_gate_restore_context,
};
/**
diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c
index 69a4308..5749b2b 100644
--- a/drivers/clk/ti/mux.c
+++ b/drivers/clk/ti/mux.c
@@ -91,10 +91,39 @@ static int ti_clk_mux_set_parent(struct clk_hw *hw, u8 index)
return 0;
}
+/**
+ * clk_mux_save_context - Save the parent selcted in the mux
+ * @hw: pointer struct clk_hw
+ *
+ * Save the parent mux value.
+ */
+static int clk_mux_save_context(struct clk_hw *hw)
+{
+ struct clk_omap_mux *mux = to_clk_omap_mux(hw);
+
+ mux->saved_parent = ti_clk_mux_get_parent(hw);
+ return 0;
+}
+
+/**
+ * clk_mux_restore_context - Restore the parent in the mux
+ * @hw: pointer struct clk_hw
+ *
+ * Restore the saved parent mux value.
+ */
+static void clk_mux_restore_context(struct clk_hw *hw)
+{
+ struct clk_omap_mux *mux = to_clk_omap_mux(hw);
+
+ ti_clk_mux_set_parent(hw, mux->saved_parent);
+}
+
const struct clk_ops ti_clk_mux_ops = {
.get_parent = ti_clk_mux_get_parent,
.set_parent = ti_clk_mux_set_parent,
.determine_rate = __clk_mux_determine_rate,
+ .save_context = clk_mux_save_context,
+ .restore_context = clk_mux_restore_context,
};
static struct clk *_register_mux(struct device *dev, const char *name,
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index a8faa38..c1b13bb 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -159,6 +159,7 @@ struct clk_hw_omap {
const char *clkdm_name;
struct clockdomain *clkdm;
const struct clk_hw_omap_ops *ops;
+ u32 context;
};
/*
@@ -293,6 +294,11 @@ struct ti_clk_features {
void ti_clk_setup_features(struct ti_clk_features *features);
const struct ti_clk_features *ti_clk_get_features(void);
+int omap3_noncore_dpll_save_context(struct clk_hw *hw);
+void omap3_noncore_dpll_restore_context(struct clk_hw *hw);
+
+int omap3_core_dpll_save_context(struct clk_hw *hw);
+void omap3_core_dpll_restore_context(struct clk_hw *hw);
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
--
1.9.1
next prev parent reply other threads:[~2018-06-21 8:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-21 8:15 [PATCH v3 0/4] clk: clk: Add functions to save/restore clock context en-masse Keerthy
2018-06-21 8:15 ` [PATCH v3 1/4] " Keerthy
2018-06-21 8:15 ` [PATCH v3 2/4] clk: clk: Add clk_gate_restore_context function Keerthy
2018-06-21 8:15 ` Keerthy [this message]
2018-06-21 8:15 ` [PATCH v3 4/4] soc: ti: pm33xx: Save/restore clk context based on enable_off_mode setting Keerthy
2018-07-10 5:56 ` [PATCH v3 0/4] clk: clk: Add functions to save/restore clock context en-masse Tony Lindgren
2018-08-13 15:25 ` Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1529568907-19930-4-git-send-email-j-keerthy@ti.com \
--to=j-keerthy@ti.com \
--cc=Russ.Dill@ti.com \
--cc=d-gerlach@ti.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=sboyd@kernel.org \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).