linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
To: netdev@vger.kernel.org, mugunthanvnm@ti.com
Cc: linux-omap@vger.kernel.org, grygorii.strashko@ti.com,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] priority improvement
Date: Fri, 5 Aug 2016 00:21:20 +0300	[thread overview]
Message-ID: <15788dfb-34f3-9c11-cf76-955a058bbd4e@linaro.org> (raw)
In-Reply-To: <1470345113-804-4-git-send-email-ivan.khoronzhuk@linaro.org>


Please, ignore it
It was sent by mistake

On 05.08.16 00:11, Ivan Khoronzhuk wrote:
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
> ---
>  drivers/net/ethernet/ti/cpsw.c | 45 +++++++++++++++++-------------------------
>  1 file changed, 18 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
> index 9ddaccc..cd12f52 100644
> --- a/drivers/net/ethernet/ti/cpsw.c
> +++ b/drivers/net/ethernet/ti/cpsw.c
> @@ -788,22 +788,16 @@ static int cpsw_tx_poll(struct napi_struct *napi_tx, int budget)
>  {
>  	struct cpsw_priv	*priv = napi_to_priv(napi_tx);
>  	int			num_tx, ch;
> -	u32			ch_map;
> +	unsigned long		ch_map;
>
>  	/* process every unprocessed channel */
> -	ch_map = cpdma_ctrl_txchs_state(priv->dma);
> -	for (ch = 0, num_tx = 0; num_tx < budget; ch_map >>= 1, ch++) {
> -		if (!ch_map) {
> -			ch_map = cpdma_ctrl_txchs_state(priv->dma);
> -			if (!ch_map)
> -				break;
> -
> -			ch = 0;
> -		}
> -
> -		if (!(ch_map & 0x01))
> -			continue;
> +	for (num_tx = 0; num_tx < budget;) {
> +		ch_map = cpdma_ctrl_txchs_state(priv->dma);
> +		if (!ch_map)
> +			break;
>
> +		/* process beginning from higher priority queue */
> +		ch = __fls(ch_map);
>  		num_tx += cpdma_chan_process(priv->txch[ch], budget - num_tx);
>  	}
>
> @@ -829,19 +823,13 @@ static int cpsw_rx_poll(struct napi_struct *napi_rx, int budget)
>  	u32			ch_map;
>
>  	/* process every unprocessed channel */
> -	ch_map = cpdma_ctrl_rxchs_state(priv->dma);
> -	for (ch = 0, num_rx = 0; num_rx < budget; ch_map >>= 1, ch++) {
> -		if (!ch_map) {
> -			ch_map = cpdma_ctrl_rxchs_state(priv->dma);
> -			if (!ch_map)
> -				break;
> -
> -			ch = 0;
> -		}
> -
> -		if (!(ch_map & 0x01))
> -			continue;
> +	for (num_rx = 0; num_rx < budget;) {
> +		ch_map = cpdma_ctrl_rxchs_state(priv->dma);
> +		if (!ch_map)
> +			break;
>
> +		/* process beginning from higher priority queue */
> +		ch = __fls(ch_map);
>  		num_rx += cpdma_chan_process(priv->rxch[ch], budget - num_rx);
>  	}
>
> @@ -1130,8 +1118,11 @@ cpsw_tx_queue_mapping(struct cpsw_priv *priv, struct sk_buff *skb)
>  {
>  	unsigned int q_idx = skb_get_queue_mapping(skb);
>
> -	if (q_idx >= priv->tx_ch_num)
> -		q_idx = q_idx % priv->tx_ch_num;
> +	/* cpsw h/w has backward order queue priority, 7 - highest */
> +	if (likely(q_idx < priv->tx_ch_num))
> +		q_idx = priv->tx_ch_num - q_idx - 1;
> +	else
> +		q_idx = 0;
>
>  	return priv->txch[q_idx];
>  }
>

-- 
Regards,
Ivan Khoronzhuk

  reply	other threads:[~2016-08-04 21:21 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-04 21:11 [PATCH 0/2] Add ability to configure ethernet h/w shaper Ivan Khoronzhuk
2016-08-04 21:11 ` [PATCH 1/2] net: core: ethtool: add per queue bandwidth command Ivan Khoronzhuk
2016-08-04 21:20   ` Ivan Khoronzhuk
2016-08-04 21:11 ` [PATCH] net: ethernet: ti: cpsw: split common driver data and slaves data Ivan Khoronzhuk
2016-08-04 21:15   ` Ivan Khoronzhuk
2016-08-05  0:16   ` kbuild test robot
2016-08-04 21:11 ` [PATCH] priority improvement Ivan Khoronzhuk
2016-08-04 21:21   ` Ivan Khoronzhuk [this message]
2016-08-04 21:11 ` [PATCH 2/2] net: core: ethtool: add ringparam perqueue command Ivan Khoronzhuk
2016-08-04 21:21   ` Ivan Khoronzhuk
2016-08-04 21:17 ` [PATCH 0/2] Add ability to configure ethernet h/w shaper Ivan Khoronzhuk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=15788dfb-34f3-9c11-cf76-955a058bbd4e@linaro.org \
    --to=ivan.khoronzhuk@linaro.org \
    --cc=grygorii.strashko@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mugunthanvnm@ti.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).