* clock rate configuration through kernel configuration
@ 2008-04-23 5:54 sharath kumar
0 siblings, 0 replies; only message in thread
From: sharath kumar @ 2008-04-23 5:54 UTC (permalink / raw)
To: linux-omap
Hi,
i am working on OMAP2430
i want to provide clock speed selection of dpll,
ARM speed and L3/ddr speed through make menuconfig
in the function "omap2_select_table_rate" in file
arch/arm/mach-omap2/clock24xx.c, if the current dpll
speed is twice or half of the currenlty programmed
dpll
value, is calls "omap2_reprogram_sdrc" function.
Else only it configures the value given in rate table.
So even if i want to change the L3 clock with
different speed with dpll and arm at same speed i am
not able to(x-load/u-boot has initialized dpll at 660
and arm at 330)
Also what is the purpose of function
"omap2_reprogram_sdrc"
Any suggestion on fix
Regards
Sharath
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2008-04-23 6:01 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-04-23 5:54 clock rate configuration through kernel configuration sharath kumar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox